- Home
- Optical Transceivers
- Finisar (Coherent)
- 25G
- FTLF8540P4BCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF8540P4BCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF8540P4BCL 25GBASE-SR/eSR single-rate SFP28 850nm 300m
25 Gb/s 25GBASE-SR/eSR single-rate SFP28 transceiver, 850nm, up to 300m (OM4), commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF8540P4BCL
- Family
- FTLF8540
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF8540P4BCL datasheet (PDF)
FTLF8540P4BCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF8540P4BCL |
| Product family | FTLF8540 |
| Form factor | SFP28 |
| Standards / application | SFF-8472 Rev 12.1b; SFF-8402g; SFF-8432a; SFF-8431 Rev 4.1c |
| Data rate | 25.78 Gb/s |
| Wavelength | 840–860 nm |
| Laser | 850 nm oxide VCSEL |
| Receiver | PIN |
| Reach | 300 m OM4; 200 m OM3 |
| Connector | Duplex LC |
| Tx output power | −8.4 to +2.4 dBm avg; OMA −4.3 to +3 dBm |
| Rx sensitivity | −4.1 dBm |
| Rx overload / max input | +3 dBm (avg receive range −11.9 to +3 dBm) |
| Extinction ratio | ≥ 2 dB |
| Supply voltage | 3.3 V (3.15–3.46 V) |
| Power dissipation | 1.2 W max (350 mA) |
| Operating temperature | Commercial |
| Diagnostics | Digital diagnostics, 2-wire serial |
| Compliance | RoHS 2011/65/EU |
| Lifecycle | Ask for availability |
| Variant note | Datasheet part |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF8540P4BCL
The Finisar FTLF8540P4BCL (now a Coherent Corp. product, formerly II-VI) is a SFP28 25GBASE-SR/eSR single-rate optical transceiver for 25 Gb/s links at 850nm over MMF, with reach up to 300m (OM4). It is a commercial-temperature part. It belongs to Finisar's FTLF8540 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 25G Ethernet server and leaf links, 5G fronthaul (eCPRI) and 10G-to-25G upgrades.
- 25.78Gb/s Extended Short Wavelength (eSR)
- Up to 25.78 Gb/s bi-directional data links
- 300m over OM4 / 200m over OM3 MMF
- 850nm Oxide VCSEL laser transmitter
- Built-in digital diagnostic functions
- Duplex LC connector
FTLF8540P4BCL: frequently asked questions
What is the Finisar FTLF8540P4BCL?
The FTLF8540P4BCL is a Finisar SFP28 transceiver for 25GBASE-SR/eSR single-rate at 25 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 25G Ethernet server and leaf links, 5G fronthaul (eCPRI) and 10G-to-25G upgrades.
What is the maximum distance of the FTLF8540P4BCL?
The FTLF8540P4BCL is specified for up to 300m (OM4) over MMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF8540P4BCL?
Per the Finisar family datasheet, the FTLF8540P4BCL transmits −8.4 to +2.4 dBm avg; OMA −4.3 to +3 dBm and has a receiver sensitivity of −4.1 dBm. Maximum receiver input is +3 dBm (avg receive range −11.9 to +3 dBm).
Does the FTLF8540P4BCL support DDM / digital diagnostics?
Yes. Digital diagnostics, 2-wire serial. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF8540P4BCL use?
The FTLF8540P4BCL works at 850nm over MMF. Both ends of a link must use the same optical standard.
Will the FTLF8540P4BCL work in my Cisco, Juniper, Arista or HPE switch?
The FTLF8540P4BCL follows the SFP28 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF8540P4BCL vs FTLF8540P4BCV: what is the difference?
Both are in Finisar's FTLF8540 family. They differ in build / application (25GBASE-SR/eSR single-rate vs 25G eSR/SR dual-rate). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF8540P4BCL rated for?
The FTLF8540P4BCL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLF8540P4BCL part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLF8540P4BCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLF8540P4BCL price in India and how do I order?
The Finisar FTLF8540P4BCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF8540P4BCL need?
It runs from 3.3 V (3.15–3.46 V) with power dissipation of 1.2 W max (350 mA).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF8540P4BCV25G eSR/SR dual-rate, 300m (OM4)FTLF8536P5BCL25GBASE-SR/10G SR-Lite/eCPRI, 100m (OM4)FTLF8536W4BTV25G SR/10G SR / eCPRI wireless, dual-rate, 100m (OM4)FTLF8538P5BCL25GE low-latency SR single-rate, up to 100m OM4 w/ RS-FECFTLF8536P4BCL25GBASE-SR single-rate 0-70C bail, 100m (OM4)FTLF1436W5BTV25GE LR/10G LR, eCPRI 24.33G, 10kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales