Finisar’s FTLX1471D3BCL 10Gb/s SFP+ optical transceivers are intended for use in 10-Gigabit Ethernet connects up to 10km over Single Mode fiber. They are consistent with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fiber Channel 1200-SM-LL-L. Computerized diagnostics capacities are accessible by means of a 2-wire sequential interface, as indicated in SFF-8472. The FTLX1471D3BCL is a “restricting module”, i.e., it utilizes a restricting beneficiary. Host board creators utilizing an EDC PHY IC ought to follow the IC producer’s suggested settings for interoperating the host-board EDC PHY with a restricting collector SFP+ module. The handset is RoHS agreeable and lead free per Directive 2011/65/EU, and Finisar Application Note AN-2038.
FTCD1323E1PCL LR8 QSFP-DD handset modules are intended for use in 400 Gigabit Ethernet joins on up to 10km of single mode fiber. They are agreeable with the QSFP-DD MSA, QSFP28 MSA, IEEE P802.3bs and parts of IEEE P802.3bm. Advanced symptomatic capacities are accessible through the I2C interface, as indicated by the MSA and Application Note AN-20xx. The optical handset is RoHS consistent as portrayed in Application Note AN-2038.
FTLC9558REUM 100G QSFP28 braid transceiver modules are intended for use in 100 Gigabit Ethernet connects over multimode fiber and can persevere through fluid inundation climate. They are consistent with the QSFP28 MSA and IEEE 802.3bm 100GBASESR4 and CAUI-4. Computerized diagnostics capacities are accessible by means of the I2C interface, as indicated by the QSFP28 MSA and Finisar Application Note AN-2141. The optical transceiver is RoHS agreeable as portrayed in Application Note AN-2038.
The Quadwire® Breakout AOC is a 4×10 Gb/s equal dynamic optical link for capacity, information, and elite processing interconnectivity. The Quadwire® AOC sends four separate floods of 10 Gb/s information over lace links in a highlight multipoint design. The link contains a QSFP+ module toward one side and four separate SFP+ modules at different closures. In view of II-VI’s demonstrated VCSEL exhibit innovation and planned with MSA-consistent QSFP+ and SFP+ high-thickness connectors, these links are minimized, lightweight, and low force. With comes to up to 30 meters, the Quadwire® Breakout dynamic optical link is undeniably appropriate for high-thickness 10G Ethernet, InfiniBand QDR, and other datacom and superior registering applications.
FTLF8519P3BNL Small Form Factor Pluggable (SFP) optical transceivers are viable with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They are at the same time viable with Gigabit Ethernet as indicated in IEEE Std 802.3 and Fiber Channel FC-PI-2 Rev. 5.0. Computerized diagnostics capacities are accessible by means of the 2-wire sequential transport indicated in the SFP MSA. The optical transceiver is RoHS consistent as portrayed in Application Note AN-2038.
FTLX8574D3BCL 10Gb/s SFP+ optical transceivers are intended for use in 10-Gigabit Ethernet connects over multimode fiber. They are consistent with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fiber Channel 1200-Mx-SN-I. Advanced diagnostics capacities are accessible by means of a 2-wire sequential interface, as indicated in SFF-8472. The FTLX8574D3BCL is a “restricting module”, i.e., it utilizes a restricting recipient. Host board architects utilizing an EDC PHY IC ought to follow the IC maker’s suggested settings for interoperating the host-board EDC PHY with a restricting beneficiary SFP+ module. The optical transceiver is RoHS consistent as portrayed in Application Note AN-2038.
FTLX8574D3BCV 1G/10G Dual-Rate SFP+ optical transceivers are intended for use in 1-Gigabit and 10-Gigabit Ethernet connects over multimode fiber. They are consistent with SFF-8431, IEEE 802.3-2012 10GBASE-SR/SW and 1000BASE-SX. Advanced diagnostics capacities are accessible through a 2-wire sequential interface, as determined in SFF-8472. The FTLX8574D3BCV is a “restricting module”, i.e., it utilizes a restricting recipient. Host board planners utilizing an EDC PHY IC ought to follow the IC producer’s suggested settings for interoperability with a SFP+ restricting module. This item is for applications explicitly intended for 10G SFP+ ports and 1G/10GSFP+ ports and not local 1G SFP ports. The optical transceiver is RoHS consistent as depicted in Application Note AN-2038.
FCLF8522P2BTL, FCLF8520P2BTL & FCLF8521P2BTL 1000BASE-T Copper Small Form Pluggable (SFP) transceivers depend on the SFP Multi Source Agreement (MSA). They are viable with the Gigabit Ethernet and 1000BASE-T guidelines as determined in IEEE Std 802.3. The optical transceiver is RoHS agreeable as portrayed in Application Note AN-2038. The 1000BASE-T actual layer IC (PHY) can be gotten to by means of I2C, permitting admittance to all PHY settings and highlights.
OPTICAL COMMUNICATIONS
ALL MODELS OF II-VI ( FINISAR )
Optical Transceivers
- FN-TRAN-FX
- FN-TRAN-SFX
- FN-TRAN-GC
- FS-TRAN-GC
- FG-TRAN-GC
- FN-TRAN-SX
- FN-TRAN-SXI
Optical Transceivers
- FR-TRAN-SX
- FG-TRAN-SX
- FN-TRAN-LX
- FG-TRAN-LX
- FN-TRAN-EX
- FR-TRAN-ZX
- FN-TRAN-SFP-1BD10
Optical Transceivers
- FN-TRAN-SFP-1BU10
- FN-TRAN-SFP-1BD40
- FN-TRAN-SFP-1BU40
- FN-TRANSFP2-SX
- FN-TRANSFP2-LX
- FN-TRAN-SFP+GC
- FN-TRAN-SFP+GC-T80
Optical Transceivers
- FS-TRAN-SFP+GC
- FN-TRAN-SFP+SR
- FN-TRAN-SFP+SRI
- FG-TRAN-SFP+SR
- FN-TRAN-SFP+LR
- FN-TRAN-SFP+LRI
- FG-TRAN-SFP+LR
Optical Transceivers
- FN-TRAN-SFP+LRM
- FN-TRAN-SFP+ER
- FN-TRAN-SFP+ERI
- FN-TRAN-SFP+ZR
- FG-TRAN-SFP+ZR
- FN-TRAN-SFP+BD27
- FN-TRAN-SFP+BD33
- FN-TRAN-SFP28-SR
- FN-TRAN-SFP28-LR
- FG-TRAN-SFP28-LR
- FN-TRAN-SFP56-SR
- FN-TRAN-QSFP+SR
- FG-TRAN-QSFP+SR
- FN-TRAN-QSFP+LR
- FN-TRAN-QSFP+LRI
- FG-TRAN-QSFP+LR
Optical Transceivers
- FN-TRAN-QSFP+ER
- FN-TRAN-QSFP+BIDI
- FG-TRAN-QSFP+SR-BIDI
- FN-TRAN-QSFP28-SR
- FG-TRAN-QSFP28-SR4
- FN-TRAN-QSFP28-LR
- FG-TRAN-QSFP28-LR4
- FN-TRAN-QSFP28-ER
- FN-TRAN-QSFP28-DR
- FN-TRAN-QSFP28-FR
- FN-TRAN-QSFP28-CWDM4
- FN-TRAN-QSFP28-BIDI
- FN-TRAN-QSFP28-BIDI-I
- FG-TRAN-CFP2-SR10
- FG-TRAN-CFP2-LR4
Optical Transceivers
- FN-TRAN-QSFP56-SR4
- FN-TRAN-QSFP56-FR4
- FN-TRAN-QSFPDD-SR8
- FN-TRAN-QSFPDD-DR4
- FN-TRAN-QSFPDD-DR4+
- FN-TRAN-QSFPDD-FR4
- FN-TRAN-QSFPDD-LR4
Fortinet SFP OPTICAL transceiver
Fortinet SFP Transceivers for
FortiGate Security Appliances
NextGen Networks supplies genuine Fortinet SFP transceivers designed for FortiGate firewalls
and Fortinet switching infrastructure. Whether you’re deploying new security appliances
or expanding an existing FortiGate network, we stock the correct optics matched to your platform.
Fortinet SFP Modules We Supply
FN-TRAN-SFP-LR
Fortinet long-reach SFP transceiver for extended-distance links
Fortinet TRAN-SFP-SR
Short-reach multimode SFP for in-building and campus connections
Fortinet 10G SFP
High-speed transceivers for 10-Gigabit FortiGate and FortiSwitch deployments
Full Fortinet SFP Range
Full range of Fortinet SFP transceiver options across speed and reach requirements
FortiGate SFP Compatibility
Fortinet appliances — including the FortiGate 100F and other FortiGate models — require specific coded SFP transceivers for proper recognition and operation. We help confirm FortiGate 100F SFP compatibility and the correct transceiver part number for your exact firewall model before you place an order, avoiding deployment delays.
Why Buy Fortinet Optics from NextGen Networks
Genuine, FortiOS-Tested Inventory
Genuine Fortinet-compatible inventory, tested for FortiOS recognition
Model-Specific Compatibility
Compatibility confirmed against your specific FortiGate/FortiSwitch model
Competitive Pricing
Competitive pricing on Fortinet 10G SFP and standard SR/LR modules
Fast Delivery Across India
Fast delivery across India for urgent network deployments
Frequently Asked Questions
Is this SFP compatible with FortiGate 100F?
FortiGate 100F requires specific coded SFP transceivers. Share your exact model and firmware version with our team to confirm FortiGate 100F SFP compatibility before ordering.
What's the difference between FN-TRAN-SFP-LR and SR variants?
LR (long-reach) modules support longer single-mode fiber distances, typically up to 10km, while SR (short-reach) modules are designed for shorter multimode fiber links within a building or campus.
Do you supply Fortinet 10G SFP for FortiSwitch deployments?
Yes, we stock Fortinet 10G SFP transceivers compatible with FortiSwitch and FortiGate platforms supporting 10-Gigabit connectivity.