- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX1475D3BNV
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX1475D3BNV stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX1475D3BNV 10GBASE-LR + 1000BASE-LX SFP+ 1310nm 10km
10 Gb/s class 10GBASE-LR + 1000BASE-LX dual-rate SFP+ transceiver, 1310nm, up to 10km, extended temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX1475D3BNV
- Family
- FTLX1475
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX1475D3BNV datasheet (PDF)
FTLX1475D3BNV specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX1475D3BNV |
| Product family | FTLX1475 |
| Form factor | SFP+ |
| Standards / application | SFF-8431, SFF-8432, IEEE 802.3ae 10GBASE-LR/LW, 10G Fibre Channel 1200-SM-LL-L |
| Data rate | 9.95–10.5 Gb/s (BCL); 9.83–10.5 Gb/s (BTL datasheet) |
| Wavelength | 1260–1355 nm |
| Laser | Uncooled 1310 nm DFB |
| Receiver | Limiting electrical interface receiver (PIN per EPS Global) |
| Reach | 10 km |
| Connector | Duplex LC |
| Tx output power | −8.2 to +0.5 dBm average (OMA min −5.2 dBm) |
| Rx sensitivity | −12.6 dBm OMA @ 10.3 Gb/s; stressed −10.3 dBm OMA |
| Extinction ratio | 3.5 dB |
| Supply voltage | 3.3 V (3.14–3.46 V) |
| Power dissipation | < 1 W |
| Operating temperature | Extended |
| Diagnostics | SFF-8472 via 2-wire serial interface |
| Compliance | RoHS-6 |
| Lifecycle | Current production |
| Variant note | Transceiver guide row 'BxV': 10.3 Gb/s, 10 km, -5 to 85 °C, 10G LR / 1G LX |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX1475D3BNV
The Finisar FTLX1475D3BNV (now a Coherent Corp. product, formerly II-VI) is a SFP+ 10GBASE-LR + 1000BASE-LX dual-rate optical transceiver for 10 Gb/s class links at 1310nm over Duplex SMF LC, with reach up to 10km. It is an extended-temperature part. It belongs to Finisar's FTLX1475 family, which has 6 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Hot-pluggable SFP+ footprint
- Supports 9.95 to 10.5 Gb/s bit rates
- Power dissipation < 1W
- Uncooled 1310nm DFB laser
- Maximum link length of 10km
- Built-in digital diagnostic functions
FTLX1475D3BNV: frequently asked questions
What is the Finisar FTLX1475D3BNV?
The FTLX1475D3BNV is a Finisar SFP+ transceiver for 10GBASE-LR + 1000BASE-LX dual-rate at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX1475D3BNV?
The FTLX1475D3BNV is specified for up to 10km over Duplex SMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX1475D3BNV?
Per the Finisar family datasheet, the FTLX1475D3BNV transmits −8.2 to +0.5 dBm average (OMA min −5.2 dBm) and has a receiver sensitivity of −12.6 dBm OMA @ 10.3 Gb/s; stressed −10.3 dBm OMA.
Does the FTLX1475D3BNV support DDM / digital diagnostics?
Yes. SFF-8472 via 2-wire serial interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX1475D3BNV use?
The FTLX1475D3BNV works at 1310nm over Duplex SMF LC. Both ends of a link must use the same optical standard.
Will the FTLX1475D3BNV work in my Cisco, Juniper, Arista or HPE switch?
The FTLX1475D3BNV follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX1475D3BNV vs FTLX1475D3BCL: what is the difference?
Both are in Finisar's FTLX1475 family. They differ in temperature grade (extended vs commercial); build / application (10GBASE-LR + 1000BASE-LX dual-rate vs 10GBASE-LR/LW, 10GFC). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX1475D3BNV rated for?
The FTLX1475D3BNV is an extended-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLX1475D3BNV part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX1475D3BNV genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX1475D3BNV price in India and how do I order?
The Finisar FTLX1475D3BNV price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX1475D3BNV need?
It runs from 3.3 V (3.14–3.46 V) with power dissipation of < 1 W.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX1475D3BCL10GBASE-LR/LW, 10GFC, 10kmFTLX1475D3BNL10GBASE-LR/LW, 10kmFTLX1475D3BTL10GBASE-LR/LW, 10kmFTLX1475D3BCV10GBASE-LR + 1000BASE-LX dual-rate, 10kmFTLX1475D3BTK10GBASE-LR extended link budget, 20kmFTLX1371D3BCL10GBASE-LRM, 220mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales