Next Gen Networks

FTLC1157RGPL

Finisar FTLC1157RGPL 100G CWDM4 Gen3 QSFP28 2km | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 100G
  5. FTLC1157RGPL
100G QSFP28 OPTICAL TRANSCEIVERCURRENT PRODUCTION

Finisar FTLC1157RGPL 100G CWDM4 Gen3 QSFP28 2km

100 Gb/s 100G CWDM4 Gen3 QSFP28 transceiver, CWDM 1271-1331nm, up to 2km / 10km, commercial temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FTLC1157RGPL
Family
FTLC1157
Category
Fiber optic transceiver modules
Datasheet
FTLC1157RGPL datasheet (PDF)
100 Gb/sCWDM 1271-1331nm2km / 10kmQSFP28Commercial tempHot-pluggable

FTLC1157RGPL specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFTLC1157RGPL
Product familyFTLC1157
Form factorQSFP28
Standards / applicationQSFP28 MSA; CWDM4 MSA; portions of IEEE 802.3bm (RGPLA also 4WDM MSA)
Data rate103.1 Gb/s aggregate; 4x 25.78 Gb/s
Wavelength1264.5–1277.5 / 1284.5–1297.5 / 1304.5–1317.5 / 1324.5–1337.5 nm
Laser4x25Gb/s CWDM transmitter (DFB)
Receiver4 photodetectors (PIN), 25.78 Gb/s each
Reach2 km SMF with KR4 FEC (5 dB loss budget); RGPLA: 10 km
ConnectorDuplex LC
Tx output powerOMA −4 to 2.5 dBm per lane; avg max 2.5 dBm per lane
Rx sensitivityRGPL: −10 dBm OMA unstressed / −7.3 dBm stressed; RGPLA: −11.3 / −8.9 dBm
Rx overload / max inputDamage threshold 3.5 dBm per lane; saturation 2.5 dBm OMA (RGPL), −2.5 dBm (RGPLA)
Extinction ratio3.5 dB
Supply voltage3.3 V (3.135–3.465 V)
Power dissipation< 3.5 W
Operating temperatureCommercial
DiagnosticsI2C management/diagnostics interface
ComplianceRoHS-6
LifecycleCurrent production
Variant note7 = Gen 3, R = 103.1 Gb/s, G = 4x25G CWDM, P = pull-tab, L = LC (datasheet 07-Jan-2020 Rev B2)

Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.

About the Finisar FTLC1157RGPL

The Finisar FTLC1157RGPL (now a Coherent Corp. product, formerly II-VI) is a QSFP28 100G CWDM4 Gen3 optical transceiver for 100 Gb/s links at CWDM 1271-1331nm over SMF duplex (LC), with reach up to 2km / 10km. It is a commercial-temperature part. It belongs to Finisar's FTLC1157 family, which has 5 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.

  • Hot-pluggable QSFP28 form factor
  • 4x25G retimed electrical interface
  • Single 3.3V power supply
  • Pull-tab release
  • RoHS-6 compliant

FTLC1157RGPL: frequently asked questions

What is the Finisar FTLC1157RGPL?

The FTLC1157RGPL is a Finisar QSFP28 transceiver for 100G CWDM4 Gen3 at 100 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.

What is the maximum distance of the FTLC1157RGPL?

The FTLC1157RGPL is specified for up to 2km / 10km over SMF duplex (LC). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

What is the optical power budget of the FTLC1157RGPL?

Per the Finisar family datasheet, the FTLC1157RGPL transmits OMA −4 to 2.5 dBm per lane; avg max 2.5 dBm per lane and has a receiver sensitivity of RGPL: −10 dBm OMA unstressed / −7.3 dBm stressed; RGPLA: −11.3 / −8.9 dBm. Maximum receiver input is Damage threshold 3.5 dBm per lane; saturation 2.5 dBm OMA (RGPL), −2.5 dBm (RGPLA).

Does the FTLC1157RGPL support DDM / digital diagnostics?

Yes. I2C management/diagnostics interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

Which fiber and connector does the FTLC1157RGPL use?

The FTLC1157RGPL works at CWDM 1271-1331nm over SMF duplex (LC). CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.

Will the FTLC1157RGPL work in my Cisco, Juniper, Arista or HPE switch?

The FTLC1157RGPL follows the QSFP28 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

FTLC1157RGPL vs FTLC1157RGPL2: what is the difference?

Both are in Finisar's FTLC1157 family. They differ in reach (2km / 10km vs 2km); build / application (100G CWDM4 Gen3 vs 100G CWDM4 Gen2). Pick the variant that matches your temperature, latch and wavelength needs.

What temperature range is the FTLC1157RGPL rated for?

The FTLC1157RGPL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.

What does the FTLC1157RGPL part number mean?

The FTLC prefix marks Finisar's 100G family (QSFP28 / CFP / CFP2 / CFP4). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.

Is your FTLC1157RGPL genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FTLC1157RGPL price in India and how do I order?

The Finisar FTLC1157RGPL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FTLC1157RGPL need?

It runs from 3.3 V (3.135–3.465 V) with power dissipation of < 3.5 W.

Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.