- Home
- Optical Transceivers
- Finisar (Coherent)
- 400G
- FTCD1333E1PCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCD1333E1PCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCD1333E1PCL 400GBASE-FR8 QSFP-DD 2 km
400 Gb/s 400GBASE-FR8 QSFP-DD transceiver, 1310nm LAN-WDM x8, up to 2 km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCD1333E1PCL
- Family
- FTCD1333
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCD1333E1PCL datasheet (PDF)
FTCD1333E1PCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCD1333E1PCL |
| Product family | FTCD1333 |
| Form factor | QSFP-DD |
| Standards / application | QSFP-DD MSA; IEEE P802.3bs (400GBASE-FR8) |
| Data rate | 425 Gb/s |
| Wavelength | 1310 nm band |
| Laser | 8x LWDM DFB |
| Receiver | PIN |
| Reach | 2 km |
| Connector | LC |
| Supply voltage | 3.3 V |
| Operating temperature | Commercial |
| Diagnostics | Digital (I2C) |
| Compliance | RoHS-6 |
| Lifecycle | Ask for availability |
| Variant note | 400GBASE-FR8 QSFP-DD 2 km |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCD1333E1PCL
The Finisar FTCD1333E1PCL (now a Coherent Corp. product, formerly II-VI) is a QSFP-DD 400GBASE-FR8 optical transceiver for 400 Gb/s links at 1310nm LAN-WDM x8 over Duplex SMF, LC, with reach up to 2 km. It is a commercial-temperature part. Typical uses: 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
- 400 Gb/s · 400GBASE-FR8 · up to 2 km
- 1310nm LAN-WDM x8 · Duplex SMF, LC
- Commercial temperature grade
- Genuine Finisar / Coherent optic · GST invoice
FTCD1333E1PCL: frequently asked questions
What is the Finisar FTCD1333E1PCL?
The FTCD1333E1PCL is a Finisar QSFP-DD transceiver for 400GBASE-FR8 at 400 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
What is the maximum distance of the FTCD1333E1PCL?
The FTCD1333E1PCL is specified for up to 2 km over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTCD1333E1PCL use?
The FTCD1333E1PCL works at 1310nm LAN-WDM x8 over Duplex SMF, LC. Both ends of a link must use the same optical standard.
Does the FTCD1333E1PCL support DDM / digital diagnostics?
Yes. Digital (I2C). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Will the FTCD1333E1PCL work in my Cisco, Juniper, Arista or HPE switch?
The FTCD1333E1PCL follows the QSFP-DD MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
What temperature range is the FTCD1333E1PCL rated for?
The FTCD1333E1PCL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCD1333E1PCL part number mean?
The FTCD prefix marks Finisar's 400G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCD1333E1PCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCD1333E1PCL price in India and how do I order?
The Finisar FTCD1333E1PCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTCD1333E1PCL need?
It runs from 3.3 V.
Related Finisar parts
FTCD4313E2PCL400GBASE-FR4, 2 kmFTCD4323E3PCL400GBASE-LR4-10 Gen3, 10 kmFTCD4523E2PCM400GBASE-DR4, 500 mFTCD4533E2PCM400G DR4+ / 4x100G-FR1, 2 kmFTCD4543E2PCM400G DR4++ / 4x100G-LR1, 10 kmFTCD1323E1PCL400GBASE-LR8, 10 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales