Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLD1xCE1C stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLD1xCE1C 12x10G CXP 850nm 100m
100 Gb/s 12x10G (120G) - 100GBASE-SR10 CXP transceiver, 850nm, up to 100m.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLD1xCE1C
- Family
- FTLD
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLD1xCE1C datasheet (PDF)
FTLD1xCE1C specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLD1xCE1C |
| Product family | FTLD |
| Form factor | CXP |
| Standards / application | IBTA CXP Specification; IEEE 802.3ba 100GBASE-SR10; CPPI electrical |
| Data rate | 1 to 11.3 Gb/s per channel (11.318 Gb/s max), 135.816 Gb/s aggregate (FTLD10CE3C) |
| Wavelength | 840–860 nm |
| Laser | 12x 850 nm VCSEL array |
| Receiver | 12x PIN photodetectors |
| Reach | 100 m on OM3, 150 m on OM4 (FTLD10CE3C) |
| Connector | MPO (MTP24), 84-pin CXP edge connector |
| Tx output power | −7.6 to 2.4 dBm per lane |
| Rx sensitivity | −5.4 dBm stressed OMA per lane |
| Rx overload / max input | 3.4 dBm damage threshold |
| Extinction ratio | 3.0 dB min |
| Supply voltage | 3.3 V |
| Power dissipation | < 3.5 W |
| Operating temperature | 0 to 70 °C case |
| Diagnostics | Digital diagnostics incl. Tx and Rx optical power monitoring |
| Compliance | RoHS-6 |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
FTLD1xCE1C: orderable variants (1)
| Part number | Details |
|---|---|
| FTLD10CE1C | 12x10G (120G) 100m CXP (EPS Global) |
Ask for any variant on WhatsApp +91-7827955775 or Sales@nextgennetworks.in – bulk pricing by quantity.
About the Finisar FTLD1xCE1C
The Finisar FTLD1xCE1C (now a Coherent Corp. product, formerly II-VI) is a CXP 12x10G (120G) - 100GBASE-SR10 optical transceiver for 100 Gb/s links at 850nm over MMF parallel (MPO-24), with reach up to 100m. The FTLD1xCE1C family name covers 1 orderable variants listed below. Typical uses: 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
- 12-channel full-duplex transceiver module
- Hot Pluggable CXP form factor
- Multirate capability: 1Gb/s to 11.3Gb/s per channel
- Low power dissipation: < 3.5W
- Reliable VCSEL array technology
- Digital Diagnostics including Tx and Rx optical power monitoring
FTLD1xCE1C: frequently asked questions
What is the Finisar FTLD1xCE1C?
The FTLD1xCE1C is a Finisar CXP transceiver for 12x10G (120G) - 100GBASE-SR10 at 100 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
What does the 'x' in FTLD1xCE1C mean?
FTLD1xCE1C is Finisar's family / ordering name. The 'x' is replaced by a code to make the exact orderable part number. For this family the codes are: 0. Two-digit numbers are ITU / CWDM wavelength channel codes. See the variants table and tell us which one you need, or share your switch and link details and we will pick the right one.
What is the optical power budget of the FTLD1xCE1C?
Per the Finisar family datasheet, the FTLD1xCE1C transmits −7.6 to 2.4 dBm per lane and has a receiver sensitivity of −5.4 dBm stressed OMA per lane. Maximum receiver input is 3.4 dBm damage threshold.
Does the FTLD1xCE1C support DDM / digital diagnostics?
Yes. Digital diagnostics incl. Tx and Rx optical power monitoring. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which part numbers are in the FTLD1xCE1C family?
Orderable variants include: FTLD10CE1C. Next Gen Networks supplies the exact variant you need in bulk with a GST invoice.
What is the maximum distance of the FTLD1xCE1C?
The FTLD1xCE1C is specified for up to 100m over MMF parallel (MPO-24). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTLD1xCE1C use?
The FTLD1xCE1C works at 850nm over MMF parallel (MPO-24). Both ends of a link must use the same optical standard.
Will the FTLD1xCE1C work in my Cisco, Juniper, Arista or HPE switch?
The FTLD1xCE1C follows the CXP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
What does the FTLD1xCE1C part number mean?
The FTLD prefix marks Finisar's 100G CXP family. The remaining characters identify the optical design and build variant.
Is your FTLD1xCE1C genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLD1xCE1C price in India and how do I order?
The Finisar FTLD1xCE1C price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLD1xCE1C need?
It runs from 3.3 V with power dissipation of < 3.5 W.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Finisar_FTLD1xCE1C_Datasheet_NextGenNetworks.pdfManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLD10CE1C12x10G, 100mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales