- Home
- Optical Transceivers
- Finisar (Coherent)
- 100G
- FTLC8281xCNM
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLC8281xCNM stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLC8281xCNM 100GBASE-SR10 + OTN CFP 850nm 100m
100 Gb/s 100GBASE-SR10 + OTN multirate CFP transceiver, 850nm, up to 100m (150m OM4).
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLC8281xCNM
- Family
- FTLC8281
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLC8281xCNM datasheet (PDF)
FTLC8281xCNM specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLC8281xCNM |
| Product family | FTLC8281 |
| Form factor | CFP |
| Standards / application | IEEE 802.3ba 100GBASE-SR10 incl. 10x 11.2G OTN |
| Data rate | 112 Gb/s max |
| Wavelength | 850 nm band |
| Receiver | PIN |
| Reach | 100 m (MMF) |
| Connector | MPO (MTP24) |
| Supply voltage | 3.3 V |
| Power dissipation | 12 W (EPS) |
| Operating temperature | 0 to 70 °C |
| Compliance | RoHS |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
FTLC8281xCNM: orderable variants (1)
| Part number | Details |
|---|---|
| FTLC8281SCNM | 850nm, 100m (150m OM4) |
Ask for any variant on WhatsApp +91-7827955775 or Sales@nextgennetworks.in – bulk pricing by quantity.
About the Finisar FTLC8281xCNM
The Finisar FTLC8281xCNM (now a Coherent Corp. product, formerly II-VI) is a CFP 100GBASE-SR10 + OTN multirate optical transceiver for 100 Gb/s links at 850nm over MMF parallel (MPO-24), with reach up to 100m (150m OM4). The FTLC8281xCNM family name covers 1 orderable variants listed below. Typical uses: 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
- 100 Gb/s CFP · up to 100m (150m OM4)
- 850nm · MMF parallel (MPO-24)
- Genuine Finisar / Coherent optic · GST invoice
- Pan-India dispatch from New Delhi
FTLC8281xCNM: frequently asked questions
What is the Finisar FTLC8281xCNM?
The FTLC8281xCNM is a Finisar CFP transceiver for 100GBASE-SR10 + OTN multirate at 100 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
What does the 'x' in FTLC8281xCNM mean?
FTLC8281xCNM is Finisar's family / ordering name. The 'x' is replaced by a code to make the exact orderable part number. For this family the codes are: S. See the variants table and tell us which one you need, or share your switch and link details and we will pick the right one.
Which part numbers are in the FTLC8281xCNM family?
Orderable variants include: FTLC8281SCNM. Next Gen Networks supplies the exact variant you need in bulk with a GST invoice.
What is the maximum distance of the FTLC8281xCNM?
The FTLC8281xCNM is specified for up to 100m (150m OM4) over MMF parallel (MPO-24). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTLC8281xCNM use?
The FTLC8281xCNM works at 850nm over MMF parallel (MPO-24). Both ends of a link must use the same optical standard.
Will the FTLC8281xCNM work in my Cisco, Juniper, Arista or HPE switch?
The FTLC8281xCNM follows the CFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
What does the FTLC8281xCNM part number mean?
The FTLC prefix marks Finisar's 100G family (QSFP28 / CFP / CFP2 / CFP4). The remaining characters identify the optical design and build variant.
Is your FTLC8281xCNM genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLC8281xCNM price in India and how do I order?
The Finisar FTLC8281xCNM price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLC8281xCNM need?
It runs from 3.3 V with power dissipation of 12 W (EPS).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Finisar_FTLC8281xCNM_Datasheet_NextGenNetworks.pdf
Related Finisar parts
FTLC8281SCNM100GBASE-SR10 + OTN multirate, 100m (150m OM4)Government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales