- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX2672D3xx
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX2672D3xx stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX2672D3xx 10G BiDi 30km, CPRI/GbE/FC SFP+ 30km
10 Gb/s class 10G BiDi 30km, CPRI/GbE/FC SFP+ transceiver, Channel-specific (see variants), up to 30km, industrial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX2672D3xx
- Family
- FTLX2672
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX2672D3xx datasheet (PDF)
FTLX2672D3xx specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX2672D3xx |
| Product family | FTLX2672 |
| Form factor | SFP+ |
| Standards / application | SFF-8431, IEEE 802.3ae 10GBASE-LR/LW, 10G FC 1200-SM-LL-L, SFF-8472 |
| Data rate | 1.0–11.3 Gb/s |
| Wavelength | BiDi 1271/1331 nm |
| Laser | Uncooled DFB |
| Receiver | PIN |
| Reach | 30 km single-strand SMF |
| Connector | Single LC |
| Supply voltage | 3.3 V |
| Operating temperature | Industrial |
| Diagnostics | SFF-8472 |
| Compliance | RoHS |
| Lifecycle | Current production |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
FTLX2672D3xx: orderable variants (2)
| Part number | Details |
|---|---|
| FTLX2672D327 | 1271 nm side of the 1271/1331 BiDi pair (suffix meaning inferred from the FTLX2072 datasheet convention; not stated for FTLX2672) |
| FTLX2672D333 | 1331 nm side of the BiDi pair (same caveat) |
Ask for any variant on WhatsApp +91-7827955775 or Sales@nextgennetworks.in – bulk pricing by quantity.
About the Finisar FTLX2672D3xx
The Finisar FTLX2672D3xx (now a Coherent Corp. product, formerly II-VI) is a SFP+ 10G BiDi 30km, CPRI/GbE/FC optical transceiver for 10 Gb/s class links at Channel-specific (see variants) over Simplex SMF LC (BiDi), with reach up to 30km. It is an industrial-temperature part. The FTLX2672D3xx family name covers 2 orderable variants listed below. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Hot-pluggable SFP+ footprint
- Bidirectional 10G over single strand single mode fiber
- Supports 1.0 to 11.3 Gb/s bit rates
- Uncooled DFB
- Single LC connector
FTLX2672D3xx: frequently asked questions
What is the Finisar FTLX2672D3xx?
The FTLX2672D3xx is a Finisar SFP+ transceiver for 10G BiDi 30km, CPRI/GbE/FC at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What does the 'x' in FTLX2672D3xx mean?
FTLX2672D3xx is Finisar's family / ordering name. The 'x' is replaced by a code to make the exact orderable part number. For this family the codes are: 27, 33. Two-digit numbers are ITU / CWDM wavelength channel codes. See the variants table and tell us which one you need, or share your switch and link details and we will pick the right one.
Which part numbers are in the FTLX2672D3xx family?
Orderable variants include: FTLX2672D327, FTLX2672D333. Next Gen Networks supplies the exact variant you need in bulk with a GST invoice.
Does the FTLX2672D3xx support DDM / digital diagnostics?
Yes. SFF-8472. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
What is the maximum distance of the FTLX2672D3xx?
The FTLX2672D3xx is specified for up to 30km over Simplex SMF LC (BiDi). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTLX2672D3xx use?
The FTLX2672D3xx works at Channel-specific (see variants) over Simplex SMF LC (BiDi). Both ends of a link must use the same optical standard.
Will the FTLX2672D3xx work in my Cisco, Juniper, Arista or HPE switch?
The FTLX2672D3xx follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
What temperature range is the FTLX2672D3xx rated for?
The FTLX2672D3xx is an industrial-temperature part. Industrial grade suits outdoor cabinets, telecom huts and plant floors.
What does the FTLX2672D3xx part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX2672D3xx genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX2672D3xx price in India and how do I order?
The Finisar FTLX2672D3xx price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX2672D3xx need?
It runs from 3.3 V.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideDownload datasheet
Finisar_FTLX2672D3xx_Datasheet_NextGenNetworks.pdf
Related Finisar parts
FTLX2672D32710G BiDi 30km, CPRI/GbE/FC, 30kmFTLX2672D33310G BiDi 30km, CPRI/GbE/FC, 30kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales