Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX6875MCC stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX6875MCC Tunable T-SFP+ high 80km
10 Gb/s class Tunable T-SFP+ high output power 10G-ZR SFP+ transceiver, C-band tunable DWDM, up to 80km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX6875MCC
- Family
- FTLX6875
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX6875MCC datasheet (PDF)
FTLX6875MCC specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX6875MCC |
| Product family | FTLX6875 |
| Form factor | SFP+ |
| Standards / application | SFF-8431, SFF-8432, SFF-8690, G.698.1 DS100S1-2Dz(C), G.709; SONET OC-192, SDH STM-64 |
| Data rate | 8.5 and 9.95–11.3168 Gb/s |
| Wavelength | C-band tunable 1528.77–1566.31 nm, 50 GHz spacing |
| Laser | Monolithic MZM tunable TOSA |
| Receiver | Linear or limiting electrical interface receiver |
| Reach | 80 km over G.652 SMF |
| Connector | Duplex LC |
| Tx output power | +3 dBm min (high output) |
| Rx sensitivity | −24.0 dBm (8.5/9.95G); −23.0 dBm (10.7G); −27.0 dBm (11.1/11.3G, BER 1E−4) |
| Rx overload / max input | −7 dBm |
| Extinction ratio | 8.2 dB |
| Supply voltage | 3.3 V (3.14–3.46 V) |
| Power dissipation | 2.5 W |
| Operating temperature | Commercial |
| Diagnostics | SFF-8472 via 2-wire serial interface |
| Compliance | RoHS-6 |
| Lifecycle | Current production |
| Variant note | High-output tunable, -5 to 70 °C |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX6875MCC
The Finisar FTLX6875MCC (now a Coherent Corp. product, formerly II-VI) is a SFP+ Tunable T-SFP+ high output power 10G-ZR optical transceiver for 10 Gb/s class links at C-band tunable DWDM over Duplex SMF LC, with reach up to 80km. It is a commercial-temperature part. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- High Optical Output Power (min +3dBm)
- Supports 8.5 and 9.95 to 11.3 Gb/s
- Up to 80km link length
- 50GHz ITU-based channel spacing with wavelength locker
- Monolithic MZM Tunable TOSA
- Built-in digital diagnostic functions
FTLX6875MCC: frequently asked questions
What is the Finisar FTLX6875MCC?
The FTLX6875MCC is a Finisar SFP+ transceiver for Tunable T-SFP+ high output power 10G-ZR at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX6875MCC?
The FTLX6875MCC is specified for up to 80km over Duplex SMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX6875MCC?
Per the Finisar family datasheet, the FTLX6875MCC transmits +3 dBm min (high output) and has a receiver sensitivity of −24.0 dBm (8.5/9.95G); −23.0 dBm (10.7G); −27.0 dBm (11.1/11.3G, BER 1E−4). Maximum receiver input is −7 dBm.
Does the FTLX6875MCC support DDM / digital diagnostics?
Yes. SFF-8472 via 2-wire serial interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX6875MCC use?
The FTLX6875MCC works at C-band tunable DWDM over Duplex SMF LC. Both ends of a link must use the same optical standard.
Will the FTLX6875MCC work in my Cisco, Juniper, Arista or HPE switch?
The FTLX6875MCC follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
What temperature range is the FTLX6875MCC rated for?
The FTLX6875MCC is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLX6875MCC part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX6875MCC genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX6875MCC price in India and how do I order?
The Finisar FTLX6875MCC price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX6875MCC need?
It runs from 3.3 V (3.14–3.46 V) with power dissipation of 2.5 W.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX6672MCCTunable T-SFP+ 10G multirate, PIN, 40kmFTLX6871MCCTunable T-SFP+ 10G-ZR/OC-192, linear APD, 80kmFTLX6873MCCTunable T-SFP+ 10G-ZR multirate, 80kmFTLX6882MCCTunable T-SFP+ 11.3G multirate, limiting APD, 80kmFTLB8611P3CCBiDi dual-band tunable DWDM T-SFP+ multirate, 20kmFTLX8574D3BCL10GBASE-SR/SW, 10GFC, 300m OM3/400m OM4Government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales