Next Gen Networks

FTLC1155RGPLC

Finisar FTLC1155RGPLC 100G eCWDM4 extended QSFP28 10km | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 100G
  5. FTLC1155RGPLC
100G QSFP28 OPTICAL TRANSCEIVERASK FOR AVAILABILITY

Finisar FTLC1155RGPLC 100G eCWDM4 extended QSFP28 10km

100 Gb/s 100G eCWDM4 extended temperature QSFP28 transceiver, CWDM 1271-1331nm, up to 10km, extended temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FTLC1155RGPLC
Family
FTLC1155
Category
Fiber optic transceiver modules
Datasheet
FTLC1155RGPLC datasheet (PDF)
100 Gb/sCWDM 1271-1331nm10kmQSFP28Extended tempHot-pluggable

FTLC1155RGPLC specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFTLC1155RGPLC
Product familyFTLC1155
Form factorQSFP28
Standards / applicationQSFP28 MSA; CWDM4 MSA; portions of IEEE 802.3bm
Data rate103.1 Gb/s aggregate; 4x 25.78125 GBd
Wavelength1264.5–1277.5 / 1284.5–1297.5 / 1304.5–1317.5 / 1324.5–1337.5 nm
Laser4x25Gb/s CWDM transmitter (DFB), Class 1
Receiver4 photodetectors, 25.78 Gb/s each
Reach2 km SMF with KR4 FEC (5 dB loss budget); RGPLD: 10 km
ConnectorDuplex LC
Tx output powerAvg max 2.5 dBm per lane
Rx sensitivity−10 dBm OMA unstressed; −7.3 dBm stressed
Rx overload / max inputSaturation 2.5 dBm OMA; damage threshold 3.5 dBm per lane
Extinction ratio3.5 dB
Supply voltage3.3 V (3.135–3.465 V)
Power dissipation< 3.5 W (extended/industrial-temp variants < 4.5 W)
Operating temperatureExtended
DiagnosticsI2C management/diagnostics interface
ComplianceRoHS-6 (2011/65/EU)
LifecycleAsk for availability

Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.

About the Finisar FTLC1155RGPLC

The Finisar FTLC1155RGPLC (now a Coherent Corp. product, formerly II-VI) is a QSFP28 100G eCWDM4 extended temperature optical transceiver for 100 Gb/s links at CWDM 1271-1331nm over SMF duplex (LC), with reach up to 10km. It is an extended-temperature part. It belongs to Finisar's FTLC1155 family, which has 11 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.

  • Hot-pluggable QSFP28 form factor
  • Adaptive CTLE
  • 4x25G retimed electrical interface
  • Single 3.3V power supply
  • I2C management interface

FTLC1155RGPLC: frequently asked questions

What is the Finisar FTLC1155RGPLC?

The FTLC1155RGPLC is a Finisar QSFP28 transceiver for 100G eCWDM4 extended temperature at 100 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.

What is the maximum distance of the FTLC1155RGPLC?

The FTLC1155RGPLC is specified for up to 10km over SMF duplex (LC). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

What is the optical power budget of the FTLC1155RGPLC?

Per the Finisar family datasheet, the FTLC1155RGPLC transmits Avg max 2.5 dBm per lane and has a receiver sensitivity of −10 dBm OMA unstressed; −7.3 dBm stressed. Maximum receiver input is Saturation 2.5 dBm OMA; damage threshold 3.5 dBm per lane.

Does the FTLC1155RGPLC support DDM / digital diagnostics?

Yes. I2C management/diagnostics interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

Which fiber and connector does the FTLC1155RGPLC use?

The FTLC1155RGPLC works at CWDM 1271-1331nm over SMF duplex (LC). CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.

Will the FTLC1155RGPLC work in my Cisco, Juniper, Arista or HPE switch?

The FTLC1155RGPLC follows the QSFP28 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

FTLC1155RGPLC vs FTLC1155RGPL: what is the difference?

Both are in Finisar's FTLC1155 family. They differ in reach (10km vs 2km); build / application (100G eCWDM4 extended temperature vs 100G CWDM4 Gen2). Pick the variant that matches your temperature, latch and wavelength needs.

What temperature range is the FTLC1155RGPLC rated for?

The FTLC1155RGPLC is an extended-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.

What does the FTLC1155RGPLC part number mean?

The FTLC prefix marks Finisar's 100G family (QSFP28 / CFP / CFP2 / CFP4). The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.

Is your FTLC1155RGPLC genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FTLC1155RGPLC price in India and how do I order?

The Finisar FTLC1155RGPLC price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FTLC1155RGPLC need?

It runs from 3.3 V (3.135–3.465 V) with power dissipation of < 3.5 W (extended/industrial-temp variants < 4.5 W).

Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.