- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX1413M3BCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX1413M3BCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX1413M3BCL 10GBASE-LR XFP 1310nm 10km
10 Gb/s class 10GBASE-LR / OC-192 SR-1 multirate 11.3G XFP transceiver, 1310nm, up to 10km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX1413M3BCL
- Family
- FTLX1413
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX1413M3BCL datasheet (PDF)
FTLX1413M3BCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX1413M3BCL |
| Product family | FTLX1413 |
| Form factor | XFP |
| Standards / application | SONET OC-192 SR-1; SDH STM I-64.1; 10GBASE-LR/LW; 10G FC 1200-SM-LL-L; 8G FC; ITU-T G.709 OTN/FEC; 10G CPRI |
| Data rate | 8.5 to 11.3 Gb/s (M3); 10.5 Gb/s max (D3, per Finisar guide) |
| Wavelength | 1290–1330 nm |
| Laser | Uncooled 1310 nm DFB |
| Receiver | PIN |
| Reach | 10 km SMF |
| Connector | Duplex LC |
| Tx output power | −6 to −1 dBm |
| Rx sensitivity | −14.4 dBm @9.95–10.5 Gb/s |
| Rx overload / max input | +0.5 dBm |
| Extinction ratio | 6 dB min |
| Supply voltage | 3.3 V (3.13–3.45 V) |
| Power dissipation | < 1.5 W |
| Operating temperature | Commercial |
| Diagnostics | Digital diagnostics via 2-wire serial interface |
| Compliance | RoHS-6 (lead-free) |
| Lifecycle | Current production |
| Variant note | Datasheet part; guide: 11.3 Gb/s incl. OC-192, 0 to 70 °C |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX1413M3BCL
The Finisar FTLX1413M3BCL (now a Coherent Corp. product, formerly II-VI) is a XFP 10GBASE-LR / OC-192 SR-1 multirate 11.3G optical transceiver for 10 Gb/s class links at 1310nm over Duplex SMF LC, with reach up to 10km. It is a commercial-temperature part. It belongs to Finisar's FTLX1413 family, which has 6 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Supports 8.5Gb/s to 11.32Gb/s bit rates
- Power dissipation <1.5W
- Single Power supply: 3.3V
- Uncooled 1310nm DFB laser
- No Reference Clock required
- Built-in digital diagnostic functions
FTLX1413M3BCL: frequently asked questions
What is the Finisar FTLX1413M3BCL?
The FTLX1413M3BCL is a Finisar XFP transceiver for 10GBASE-LR / OC-192 SR-1 multirate 11.3G at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX1413M3BCL?
The FTLX1413M3BCL is specified for up to 10km over Duplex SMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX1413M3BCL?
Per the Finisar family datasheet, the FTLX1413M3BCL transmits −6 to −1 dBm and has a receiver sensitivity of −14.4 dBm @9.95–10.5 Gb/s. Maximum receiver input is +0.5 dBm.
Does the FTLX1413M3BCL support DDM / digital diagnostics?
Yes. Digital diagnostics via 2-wire serial interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX1413M3BCL use?
The FTLX1413M3BCL works at 1310nm over Duplex SMF LC. Both ends of a link must use the same optical standard.
Will the FTLX1413M3BCL work in my Cisco, Juniper, Arista or HPE switch?
The FTLX1413M3BCL follows the XFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX1413M3BCL vs FTLX1413D3BCL: what is the difference?
Both are in Finisar's FTLX1413 family. They differ in build / application (10GBASE-LR / OC-192 SR-1 multirate 11.3G vs 10GBASE-LR, 10GFC). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX1413M3BCL rated for?
The FTLX1413M3BCL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLX1413M3BCL part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX1413M3BCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX1413M3BCL price in India and how do I order?
The Finisar FTLX1413M3BCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX1413M3BCL need?
It runs from 3.3 V (3.13–3.45 V) with power dissipation of < 1.5 W.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX1413D3BCL10GBASE-LR, 10GFC, 10kmFTLX1413D3BNL10GBASE-LR, 10kmFTLX1413D3BTL10GBASE-LR, 10GFC, 10kmFTLX1413M3BNL10GBASE-LR / OC-192 SR-1 multirate, 10kmFTLX1413M3BTL10GBASE-LR / OC-192 SR-1 multirate 11.3G, 10kmFTLX1412D3BCL10GBASE-LR/LW, 10GFC, 10kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales