- Home
- Optical Transceivers
- Finisar (Coherent)
- 200G
- FTCC3311M1BCL-OR
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCC3311M1BCL-OR stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCC3311M1BCL-OR 200G/100G DCO, Open CFP2-DCO 600 km
200 Gb/s 200G/100G DCO, Open ROADM, 0 dBm CFP2-DCO transceiver, C-band DWDM tunable, up to 600 km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCC3311M1BCL-OR
- Family
- FTCC3311
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCC3311M1BCL-OR datasheet (PDF)
FTCC3311M1BCL-OR specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCC3311M1BCL-OR |
| Product family | FTCC3311 |
| Form factor | CFP2-DCO |
| Standards / application | CFP MSA CFP2 hardware spec; OIF CFP2-DCO IA; host 100GE/200GE/OTU4 |
| Data rate | 200G/100G (212 Gb/s line) |
| Wavelength | C-band tunable |
| Laser | C-band 5 THz DWDM tunable |
| Receiver | Coherent |
| Reach | 2000 km (Coherent page); 600 km (brochure / EPS for -OR) |
| Connector | LC, duplex SMF |
| Tx output power | 0 dBm |
| Operating temperature | Commercial |
| Diagnostics | MDIO; digital diagnostics |
| Compliance | RoHS (AN-2038) |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCC3311M1BCL-OR
The Finisar FTCC3311M1BCL-OR (now a Coherent Corp. product, formerly II-VI) is a CFP2-DCO 200G/100G DCO, Open ROADM, 0 dBm optical transceiver for 200 Gb/s links at C-band DWDM tunable over Duplex SMF, LC, with reach up to 600 km. It is a commercial-temperature part. It belongs to Finisar's FTCC3311 family, which has 3 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 200G Ethernet / HDR fabrics and coherent DCI.
- Multi-rate, SD-FEC
- DP-16QAM/8QAM/QPSK
- C-band tunable
FTCC3311M1BCL-OR: frequently asked questions
What is the Finisar FTCC3311M1BCL-OR?
The FTCC3311M1BCL-OR is a Finisar CFP2-DCO transceiver for 200G/100G DCO, Open ROADM, 0 dBm at 200 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 200G Ethernet / HDR fabrics and coherent DCI.
What is the maximum distance of the FTCC3311M1BCL-OR?
The FTCC3311M1BCL-OR is specified for up to 600 km over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCC3311M1BCL-OR?
Per the Finisar family datasheet, the FTCC3311M1BCL-OR transmits 0 dBm.
Does the FTCC3311M1BCL-OR support DDM / digital diagnostics?
Yes. MDIO; digital diagnostics. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCC3311M1BCL-OR use?
The FTCC3311M1BCL-OR works at C-band DWDM tunable over Duplex SMF, LC. Both ends of a link must use the same optical standard.
Will the FTCC3311M1BCL-OR work in my Cisco, Juniper, Arista or HPE switch?
The FTCC3311M1BCL-OR follows the CFP2-DCO MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCC3311M1BCL-OR vs FTCC3311M1BCL: what is the difference?
Both are in Finisar's FTCC3311 family. They differ in build / application (200G/100G DCO, Open ROADM, 0 dBm vs 200G/100G metro DCO, DP-QPSK/16QAM). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCC3311M1BCL-OR rated for?
The FTCC3311M1BCL-OR is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCC3311M1BCL-OR part number mean?
The FTCC prefix marks Finisar's 200G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCC3311M1BCL-OR genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCC3311M1BCL-OR price in India and how do I order?
The Finisar FTCC3311M1BCL-OR price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
Related Finisar parts
FTCC3311M1BCL200G/100G metro DCO, DP-QPSK/16QAM, 600 kmFTCC3311O1BCL200G/100G DCO, Open ROADM, 600 kmFTCC1112E1PLL200GBASE-FR4, 2 kmFTCC8612E2PCM200GBASE-SR4, 100 m OM4FTCD8618E1PCMVR2200GBASE-VR2, 30 m OM3 / 50 m OM4FTCC1122E2PCL200GBASE-FR4, 500 mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales