Next Gen Networks

FTEN2115P1NUN

Finisar FTEN2115P1NUN EPON ONU-on-a-stick PX10 SFP 10km | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 100M–1G
  5. FTEN2115P1NUN
≤1G SFP OPTICAL TRANSCEIVERCURRENT PRODUCTION

Finisar FTEN2115P1NUN EPON ONU-on-a-stick PX10 SFP 10km

1 Gb/s EPON ONU-on-a-stick PX10 SFP transceiver, Tx 1310nm / Rx 1490nm (BiDi), up to 10km, extended temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FTEN2115P1NUN
Family
FTEN2115P1xUN
Category
Fiber optic transceiver modules
Datasheet
FTEN2115P1NUN datasheet (PDF)
1 Gb/sTx 1310nm / Rx 1490nm10kmSFPExtended tempHot-pluggable

FTEN2115P1NUN specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFTEN2115P1NUN
Product familyFTEN2115P1xUN
Form factorSFP (SC, single-fiber)
Standards / applicationIEEE 802.3ah EPON PX10 ONU
Data rate1.25 Gb/s symmetric (1250 Mb/s)
WavelengthTx 1310 nm (1260–1360 nm) upstream; Rx 1490 nm (1480–1500 nm) downstream
ReceiverPIN (per EPS Global product page)
Reach10 km (EPS Global; datasheet gives PX10 link budget class)
ConnectorSingle-fiber bi-directional SC receptacle
Tx output power−1 to +4 dBm
Rx sensitivity−25 dBm
Rx overload / max input−3 dBm
Extinction ratio9 dB
Supply voltage3.3 V (3.15–3.45 V)
Power dissipationSupply current 500 typ / 620 max mA
Operating temperatureExtended
DiagnosticsBuilt-in digital diagnostics via 2-wire serial bus
ComplianceIEEE 802.3ah EPON
LifecycleCurrent production
Variant notePX10, CTC OAM, −20 to 70 °C case (ordering table)

Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.

About the Finisar FTEN2115P1NUN

The Finisar FTEN2115P1NUN (now a Coherent Corp. product, formerly II-VI) is a SFP (SC, single-fiber) EPON ONU-on-a-stick PX10 optical transceiver for 1 Gb/s links at Tx 1310nm / Rx 1490nm (BiDi) over SMF, with reach up to 10km. It is an extended-temperature part. It belongs to Finisar's FTEN2115P1xUN family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.

  • EPON ONU in MSA SFP footprint
  • Compliance with IEEE 802.3ah
  • CTC OAM support
  • Built-in digital diagnostics functions
  • Compatibility with EPON OLTs and CPE equipment

FTEN2115P1NUN: frequently asked questions

What is the Finisar FTEN2115P1NUN?

The FTEN2115P1NUN is a Finisar SFP (SC, single-fiber) transceiver for EPON ONU-on-a-stick PX10 at 1 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.

What is the maximum distance of the FTEN2115P1NUN?

The FTEN2115P1NUN is specified for up to 10km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

What is the optical power budget of the FTEN2115P1NUN?

Per the Finisar family datasheet, the FTEN2115P1NUN transmits −1 to +4 dBm and has a receiver sensitivity of −25 dBm. Maximum receiver input is −3 dBm.

Does the FTEN2115P1NUN support DDM / digital diagnostics?

Yes. Built-in digital diagnostics via 2-wire serial bus. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

Which fiber and connector does the FTEN2115P1NUN use?

The FTEN2115P1NUN works at Tx 1310nm / Rx 1490nm (BiDi) over SMF. Both ends of a link must use the same optical standard.

Will the FTEN2115P1NUN work in my Cisco, Juniper, Arista or HPE switch?

The FTEN2115P1NUN follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

FTEN2115P1NUN vs FTEN2115P1NUN-BC: what is the difference?

Both are in Finisar's FTEN2115P1xUN family. They differ in build / application (EPON ONU-on-a-stick PX10 vs EPON ONU-on-a-stick PX10, -BC build). Pick the variant that matches your temperature, latch and wavelength needs.

What temperature range is the FTEN2115P1NUN rated for?

The FTEN2115P1NUN is an extended-temperature part (per Finisar's part-number temperature code). Choose an industrial (T) variant for outdoor or uncontrolled sites.

What does the FTEN2115P1NUN part number mean?

The FTEN prefix marks Finisar's EPON ONU SFP family. The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.

Is your FTEN2115P1NUN genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FTEN2115P1NUN price in India and how do I order?

The Finisar FTEN2115P1NUN price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FTEN2115P1NUN need?

It runs from 3.3 V (3.15–3.45 V) with power dissipation of Supply current 500 typ / 620 max mA.

Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.