Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX6872MCC stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX6872MCC Tunable T-SFP+ 80km
10 Gb/s class Tunable T-SFP+ 10G-ZR/OC-192, limiting APD SFP+ transceiver, C-band tunable DWDM 50GHz, up to 80km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX6872MCC
- Family
- FTLX687x
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX6872MCC datasheet (PDF)
FTLX6872MCC specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX6872MCC |
| Product family | FTLX687x |
| Form factor | SFP+ |
| Standards / application | SFF-8431, SFF-8432, SFF-8690, ITU-T G.698.1 DS100S1-2Dz(C), G.709; SONET OC-192, SDH STM-64, 10GbE ZR, 10G FC |
| Data rate | 8.5 and 9.95–11.3168 Gb/s |
| Wavelength | C-band tunable 1528.77–1563.86 nm, 50 GHz spacing |
| Laser | Monolithic MZM tunable TOSA with wavelength locker |
| Receiver | Linear (6871) or limiting (6872) electrical interface |
| Reach | 80 km over G.652 SMF |
| Connector | Duplex LC |
| Tx output power | −1 to +3 dBm |
| Rx sensitivity | −24.0 dBm (8.5/9.95G, 1E−12); −23.0 dBm (10.7/11.1G, 1E−12); −27.0 dBm (11.1/11.3G, 1E−4) |
| Rx overload / max input | −7 dBm |
| Extinction ratio | 8.2 dB |
| Supply voltage | 3.3 V (3.14–3.46 V) |
| Power dissipation | 2.0 W (MCC); 1.8 W typ / 1.9 W max with CDRs on (MNC) |
| Operating temperature | Commercial |
| Diagnostics | Digital diagnostics via 2-wire serial interface |
| Compliance | RoHS-6 |
| Lifecycle | Current production |
| Variant note | Limiting Rx, -5 to 70 °C |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX6872MCC
The Finisar FTLX6872MCC (now a Coherent Corp. product, formerly II-VI) is a SFP+ Tunable T-SFP+ 10G-ZR/OC-192, limiting APD optical transceiver for 10 Gb/s class links at C-band tunable DWDM 50GHz over Duplex SMF LC, with reach up to 80km. It is a commercial-temperature part. It belongs to Finisar's FTLX687x family, which has 5 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Supports 8.5 and 9.95 to 11.3 Gb/s
- Up to 80km link length
- 50GHz ITU-based channel spacing (C-Band) with a wavelength locker
- Monolithic MZM Tunable TOSA
- Linear or Limiting electrical interface receiver
- Built-in digital diagnostic functions
FTLX6872MCC: frequently asked questions
What is the Finisar FTLX6872MCC?
The FTLX6872MCC is a Finisar SFP+ transceiver for Tunable T-SFP+ 10G-ZR/OC-192, limiting APD at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX6872MCC?
The FTLX6872MCC is specified for up to 80km over Duplex SMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX6872MCC?
Per the Finisar family datasheet, the FTLX6872MCC transmits −1 to +3 dBm and has a receiver sensitivity of −24.0 dBm (8.5/9.95G, 1E−12); −23.0 dBm (10.7/11.1G, 1E−12); −27.0 dBm (11.1/11.3G, 1E−4). Maximum receiver input is −7 dBm.
Does the FTLX6872MCC support DDM / digital diagnostics?
Yes. Digital diagnostics via 2-wire serial interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX6872MCC use?
The FTLX6872MCC works at C-band tunable DWDM 50GHz over Duplex SMF LC. Both ends of a link must use the same optical standard.
Will the FTLX6872MCC work in my Cisco, Juniper, Arista or HPE switch?
The FTLX6872MCC follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX6872MCC vs FTLX6871MCC: what is the difference?
Both are in Finisar's FTLX687x family. They differ in build / application (Tunable T-SFP+ 10G-ZR/OC-192, limiting APD vs Tunable T-SFP+ 10G-ZR/OC-192, linear APD). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX6872MCC rated for?
The FTLX6872MCC is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLX6872MCC part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX6872MCC genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX6872MCC price in India and how do I order?
The Finisar FTLX6872MCC price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX6872MCC need?
It runs from 3.3 V (3.14–3.46 V) with power dissipation of 2.0 W (MCC); 1.8 W typ / 1.9 W max with CDRs on (MNC).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX6871MCCTunable T-SFP+ 10G-ZR/OC-192, linear APD, 80kmFTLX6871MNCTunable T-SFP+ 10G-ZR/OC-192, linear APD, 80kmFTLX6872MNCTunable T-SFP+ 10G-ZR/OC-192, limiting APD, 80kmFTLX6872MTCTunable T-SFP+ 10G multirate, limiting APD, 80kmFTLX6672MCCTunable T-SFP+ 10G multirate, PIN, 40kmFTLX6873MCCTunable T-SFP+ 10G-ZR multirate, 80kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales