- Home
- Optical Transceivers
- Finisar (Coherent)
- 800G
- FTCE4516E1PCM
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCE4516E1PCM stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCE4516E1PCM 800G DR8 QSFP-DD800 500 m
800 Gb/s 800G DR8 / 2x400G DR4 / 8x100G QSFP-DD800 transceiver, 1310nm EML x8, up to 500 m, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCE4516E1PCM
- Family
- FTCE4516
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCE4516E1PCM datasheet (PDF)
FTCE4516E1PCM specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCE4516E1PCM |
| Product family | FTCE4516 |
| Form factor | QSFP-DD800 |
| Standards / application | IEEE 802.3bs, IEEE P802.3ck; QSFP-DD MSA; CMIS 5.0 |
| Data rate | 850 Gb/s aggregate; 8 x 53.125 GBd PAM4 (106.25 Gb/s PAM4 electrical) |
| Wavelength | 1304.5 to 1317.5 nm |
| Reach | 500 m SMF |
| Connector | MPO-16; 76-pin edge connector |
| Tx output power | −2 dBm min, 4.5 dBm typ (avg launch, per lane) |
| Rx sensitivity | −4.4 dBm (per lane) |
| Rx overload / max input | 5 dBm (overload/damage threshold, per lane) |
| Extinction ratio | 3.5 dB |
| Supply voltage | 3.3 V (3.135–3.465 V) |
| Power dissipation | 17.5 W max |
| Operating temperature | Commercial |
| Diagnostics | CMIS 5.0, I2C-based diagnostics |
| Compliance | QSFP-DD MSA; RoHS; Class 1 laser per IEC 60825-1 |
| Lifecycle | Current production |
| Variant note | Datasheet part |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCE4516E1PCM
The Finisar FTCE4516E1PCM (now a Coherent Corp. product, formerly II-VI) is a QSFP-DD800 800G DR8 / 2x400G DR4 / 8x100G optical transceiver for 800 Gb/s links at 1310nm EML x8 over Parallel SMF, MPO16, with reach up to 500 m. It is a commercial-temperature part. It belongs to Finisar's FTCE4516 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
- 800G-DR8 QSFP-DD800
- Hot-pluggable
- Supports 8x100GbE breakout
- 2 x 400GbE DR4 operation
- Firmware upgrade through CDB
- PRBS generation and checking
FTCE4516E1PCM: frequently asked questions
What is the Finisar FTCE4516E1PCM?
The FTCE4516E1PCM is a Finisar QSFP-DD800 transceiver for 800G DR8 / 2x400G DR4 / 8x100G at 800 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
What is the maximum distance of the FTCE4516E1PCM?
The FTCE4516E1PCM is specified for up to 500 m over Parallel SMF, MPO16. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCE4516E1PCM?
Per the Finisar family datasheet, the FTCE4516E1PCM transmits −2 dBm min, 4.5 dBm typ (avg launch, per lane) and has a receiver sensitivity of −4.4 dBm (per lane). Maximum receiver input is 5 dBm (overload/damage threshold, per lane).
Does the FTCE4516E1PCM support DDM / digital diagnostics?
Yes. CMIS 5.0, I2C-based diagnostics. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCE4516E1PCM use?
The FTCE4516E1PCM works at 1310nm EML x8 over Parallel SMF, MPO16. Both ends of a link must use the same optical standard.
Will the FTCE4516E1PCM work in my Cisco, Juniper, Arista or HPE switch?
The FTCE4516E1PCM follows the QSFP-DD800 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCE4516E1PCM vs FTCE4516E1PXM: what is the difference?
Both are in Finisar's FTCE4516 family. They differ in build / application (800G DR8 / 2x400G DR4 / 8x100G vs 800G DR8 (part listed by Coherent with X temp placeholder)). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCE4516E1PCM rated for?
The FTCE4516E1PCM is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCE4516E1PCM part number mean?
The FTCE prefix marks Finisar's 800G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCE4516E1PCM genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCE4516E1PCM price in India and how do I order?
The Finisar FTCE4516E1PCM price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTCE4516E1PCM need?
It runs from 3.3 V (3.135–3.465 V) with power dissipation of 17.5 W max.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTCE4516E1PXM800G DR8, 500 mFTCE4526E1PCM800G DR8+, 2 kmFTCE3316E1PCLOIF 800ZR, -7 dBm, 120 km (ZR)FTCE3326E1PCL800ZR, 0 dBm high power, 120 kmFTCE3L26E1PCLOIF 800ZR, 0 dBm, L-band, 120 kmFTCE4517E1PCM800G DR8, 500 mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales