- Home
- Optical Transceivers
- Finisar (Coherent)
- 100M–1G
- FTEN2215P1CUN-BC
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTEN2215P1CUN-BC stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTEN2215P1CUN-BC EPON ONU-on-a-stick PX10, SFP 10km
1 Gb/s EPON ONU-on-a-stick PX10, -BC build SFP transceiver, Tx 1310nm / Rx 1490nm (BiDi), up to 10km.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTEN2215P1CUN-BC
- Family
- FTEN2215P1xUN
- Category
- Fiber optic transceiver modules
- Datasheet
- FTEN2215P1CUN-BC datasheet (PDF)
FTEN2215P1CUN-BC specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTEN2215P1CUN-BC |
| Product family | FTEN2215P1xUN |
| Form factor | SFP (SC, single-fiber) |
| Standards / application | IEEE 802.3ah EPON PX10 ONU |
| Data rate | 1.25 Gb/s symmetric (1250 Mb/s) |
| Wavelength | Tx 1310 nm (1260–1360 nm) upstream; Rx 1490 nm (1480–1500 nm) downstream |
| Receiver | PIN (per EPS Global product page) |
| Reach | 10 km (EPS Global; datasheet gives PX10 link budget class) |
| Connector | Single-fiber bi-directional SC receptacle |
| Tx output power | −1 to +4 dBm |
| Rx sensitivity | −25 dBm |
| Rx overload / max input | −3 dBm |
| Extinction ratio | 9 dB |
| Supply voltage | 3.3 V (3.15–3.45 V) |
| Power dissipation | Supply current 500 typ / 620 max mA |
| Operating temperature | −20 to 70 °C case (standard); −30 to 85 °C case (-BC) |
| Diagnostics | Built-in digital diagnostics via 2-wire serial bus |
| Compliance | IEEE 802.3ah EPON |
| Lifecycle | Current production |
| Variant note | -BC = extended case temperature −30 to 85 °C |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTEN2215P1CUN-BC
The Finisar FTEN2215P1CUN-BC (now a Coherent Corp. product, formerly II-VI) is a SFP (SC, single-fiber) EPON ONU-on-a-stick PX10, -BC build optical transceiver for 1 Gb/s links at Tx 1310nm / Rx 1490nm (BiDi) over SMF, with reach up to 10km. It belongs to Finisar's FTEN2215P1xUN family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.
- EPON ONU in MSA SFP footprint
- Compliance with IEEE 802.3ah
- DPoE OAM compliance (per EPS Global listing)
- Built-in digital diagnostics functions
- Compatibility with EPON OLTs and CPE equipment
FTEN2215P1CUN-BC: frequently asked questions
What is the Finisar FTEN2215P1CUN-BC?
The FTEN2215P1CUN-BC is a Finisar SFP (SC, single-fiber) transceiver for EPON ONU-on-a-stick PX10, -BC build at 1 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.
What is the maximum distance of the FTEN2215P1CUN-BC?
The FTEN2215P1CUN-BC is specified for up to 10km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTEN2215P1CUN-BC?
Per the Finisar family datasheet, the FTEN2215P1CUN-BC transmits −1 to +4 dBm and has a receiver sensitivity of −25 dBm. Maximum receiver input is −3 dBm.
Does the FTEN2215P1CUN-BC support DDM / digital diagnostics?
Yes. Built-in digital diagnostics via 2-wire serial bus. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTEN2215P1CUN-BC use?
The FTEN2215P1CUN-BC works at Tx 1310nm / Rx 1490nm (BiDi) over SMF. Both ends of a link must use the same optical standard.
Will the FTEN2215P1CUN-BC work in my Cisco, Juniper, Arista or HPE switch?
The FTEN2215P1CUN-BC follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTEN2215P1CUN-BC vs FTEN2215P1CUN: what is the difference?
Both are in Finisar's FTEN2215P1xUN family. They differ in build / application (EPON ONU-on-a-stick PX10, -BC build vs EPON ONU-on-a-stick PX10). Pick the variant that matches your temperature, latch and wavelength needs.
What does the FTEN2215P1CUN-BC part number mean?
The FTEN prefix marks Finisar's EPON ONU SFP family. The remaining characters identify the optical design and build variant.
Is your FTEN2215P1CUN-BC genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTEN2215P1CUN-BC price in India and how do I order?
The Finisar FTEN2215P1CUN-BC price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTEN2215P1CUN-BC need?
It runs from 3.3 V (3.15–3.45 V) with power dissipation of Supply current 500 typ / 620 max mA.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTEN2215P1CUNEPON ONU-on-a-stick PX10, 10kmFTEN2117P1NUNEPON ONU-on-a-stick PX20+, 20kmFTEN2217P1CUNEPON ONU-on-a-stick PX20+, 20kmFTEN2115P1NUNEPON ONU-on-a-stick PX10, 10kmFTLF1318P3BTL1000BASE-LX / 1GFC, 10kmFTLF1518P1BTL1000BASE-ZX / 1GFC, 80-90kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales