- Home
- Optical Transceivers
- Finisar (Coherent)
- 100G
- FTLC3353R3PL1
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLC3353R3PL1 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLC3353R3PL1 100G ZR digital coherent QSFP28 up to 300km
100 Gb/s 100G ZR digital coherent optics (DCO), Steelerton DSP QSFP28 transceiver, C-band DWDM tunable, up to up to 300km (amplified), commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLC3353R3PL1
- Family
- FTLC3353
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLC3353R3PL1 datasheet (PDF)
FTLC3353R3PL1 specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLC3353R3PL1 |
| Product family | FTLC3353 |
| Form factor | QSFP28 |
| Standards / application | IEEE 802.3-2022 100GBASE-ZR; SFF-8636 management |
| Data rate | 100 Gb/s |
| Wavelength | C-band 5 THz DWDM tunable |
| Laser | Tunable DP-QPSK, C-band |
| Receiver | Coherent |
| Reach | 300 km |
| Connector | Duplex LC |
| Tx output power | 0 dBm (high Tx output power) |
| Power dissipation | < 5 W typical |
| Operating temperature | Commercial |
| Diagnostics | Digital diagnostics; SFF-8636; remote digital diagnostics |
| Lifecycle | Current production |
| Variant note | 100G ZR QSFP28 DCO, high Tx output power (0 dBm) with TOF, 100GE, C-temp 0–70 °C, SFF-8636 (Coherent page) |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLC3353R3PL1
The Finisar FTLC3353R3PL1 (now a Coherent Corp. product, formerly II-VI) is a QSFP28 100G ZR digital coherent optics (DCO), Steelerton DSP optical transceiver for 100 Gb/s links at C-band DWDM tunable over SMF duplex (LC), with reach up to up to 300km (amplified). It is a commercial-temperature part. It belongs to Finisar's FTLC3353 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
- Built around Coherent Steelerton DSP
- Fully compliant to IEEE 802.3-2022 100GBASE-ZR
- Silicon photonics optical front-end
- Power-optimized tunable laser
- Zero-touch provisioning via automatic wavelength configuration
- Typical power dissipation under 5W
FTLC3353R3PL1: frequently asked questions
What is the Finisar FTLC3353R3PL1?
The FTLC3353R3PL1 is a Finisar QSFP28 transceiver for 100G ZR digital coherent optics (DCO), Steelerton DSP at 100 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
What is the maximum distance of the FTLC3353R3PL1?
The FTLC3353R3PL1 is specified for up to up to 300km (amplified) over SMF duplex (LC). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLC3353R3PL1?
Per the Finisar family datasheet, the FTLC3353R3PL1 transmits 0 dBm (high Tx output power).
Does the FTLC3353R3PL1 support DDM / digital diagnostics?
Yes. Digital diagnostics; SFF-8636; remote digital diagnostics. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLC3353R3PL1 use?
The FTLC3353R3PL1 works at C-band DWDM tunable over SMF duplex (LC). Both ends of a link must use the same optical standard.
Will the FTLC3353R3PL1 work in my Cisco, Juniper, Arista or HPE switch?
The FTLC3353R3PL1 follows the QSFP28 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLC3353R3PL1 vs FTLC3353S3PL1: what is the difference?
Both are in Finisar's FTLC3353 family and share the same core optics; the suffix marks a different build option (latch, receiver or ordering variant). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLC3353R3PL1 rated for?
The FTLC3353R3PL1 is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLC3353R3PL1 part number mean?
The FTLC prefix marks Finisar's 100G family (QSFP28 / CFP / CFP2 / CFP4). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLC3353R3PL1 genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLC3353R3PL1 price in India and how do I order?
The Finisar FTLC3353R3PL1 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLC3353R3PL1 need?
It runs from the standard host supply with power dissipation of < 5 W typical.
Related Finisar parts
FTLC3353S3PL1100G ZR digital coherent optics, up to 300km (amplified)FTLC3351R3PL1100G ZR digital coherent optics, up to 300km (amplified)FTLC3352R3PL1100G ZR digital coherent optics, up to 300km (amplified)FTLC9555REPM100GBASE-SR4/25G SR, low latency / limited or no FEC, 100m (40m no-FECFTLC9152RGPL100G SWDM4, 100m (OM4) / 150m (OM5)FTLC1155RGPL100G CWDM4 Gen2, 2kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales