- Home
- Optical Transceivers
- Finisar (Coherent)
- 200G
- FTCC3311M1BCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCC3311M1BCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCC3311M1BCL 200G/100G metro DCO, CFP2-DCO 600 km
200 Gb/s 200G/100G metro DCO, DP-QPSK/16QAM CFP2-DCO transceiver, C-band DWDM tunable, up to 600 km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCC3311M1BCL
- Family
- FTCC3311
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCC3311M1BCL datasheet (PDF)
FTCC3311M1BCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCC3311M1BCL |
| Product family | FTCC3311 |
| Form factor | CFP2-DCO |
| Standards / application | CFP MSA CFP2 hardware spec; OIF CFP2-DCO IA; host 100GE/200GE/OTU4 |
| Data rate | 200G/100G (212 Gb/s line) |
| Wavelength | C-band tunable |
| Laser | C-band 5 THz DWDM tunable |
| Receiver | Coherent |
| Reach | 2000 km (Coherent page); 600 km (brochure / EPS for -OR) |
| Connector | LC, duplex SMF |
| Tx output power | 0 dBm |
| Operating temperature | Commercial |
| Diagnostics | MDIO; digital diagnostics |
| Compliance | RoHS (AN-2038) |
| Lifecycle | Legacy / end-of-life |
| Variant note | 200G/100G CFP2-DCO metro |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCC3311M1BCL
The Finisar FTCC3311M1BCL (now a Coherent Corp. product, formerly II-VI) is a CFP2-DCO 200G/100G metro DCO, DP-QPSK/16QAM optical transceiver for 200 Gb/s links at C-band DWDM tunable over Duplex SMF, LC, with reach up to 600 km. It is a commercial-temperature part. It belongs to Finisar's FTCC3311 family, which has 3 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. This is a legacy Finisar part; we help buyers find remaining stock or a current Coherent alternative. Typical uses: 200G Ethernet / HDR fabrics and coherent DCI.
- Multi-rate, SD-FEC
- DP-16QAM/8QAM/QPSK
- C-band tunable
FTCC3311M1BCL: frequently asked questions
What is the Finisar FTCC3311M1BCL?
The FTCC3311M1BCL is a Finisar CFP2-DCO transceiver for 200G/100G metro DCO, DP-QPSK/16QAM at 200 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 200G Ethernet / HDR fabrics and coherent DCI.
What is the maximum distance of the FTCC3311M1BCL?
The FTCC3311M1BCL is specified for up to 600 km over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCC3311M1BCL?
Per the Finisar family datasheet, the FTCC3311M1BCL transmits 0 dBm.
Does the FTCC3311M1BCL support DDM / digital diagnostics?
Yes. MDIO; digital diagnostics. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCC3311M1BCL use?
The FTCC3311M1BCL works at C-band DWDM tunable over Duplex SMF, LC. Both ends of a link must use the same optical standard.
Will the FTCC3311M1BCL work in my Cisco, Juniper, Arista or HPE switch?
The FTCC3311M1BCL follows the CFP2-DCO MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCC3311M1BCL vs FTCC3311M1BCL-OR: what is the difference?
Both are in Finisar's FTCC3311 family. They differ in build / application (200G/100G metro DCO, DP-QPSK/16QAM vs 200G/100G DCO, Open ROADM, 0 dBm). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCC3311M1BCL rated for?
The FTCC3311M1BCL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCC3311M1BCL part number mean?
The FTCC prefix marks Finisar's 200G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is the FTCC3311M1BCL still available?
The FTCC3311M1BCL is a legacy Finisar part, so new production is limited or ended. Next Gen Networks helps source remaining genuine stock and can suggest a current Coherent alternative with the same reach and wavelength.
What is the FTCC3311M1BCL price in India and how do I order?
The Finisar FTCC3311M1BCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
Related Finisar parts
FTCC3311M1BCL-OR200G/100G DCO, Open ROADM, 0 dBm, 600 kmFTCC3311O1BCL200G/100G DCO, Open ROADM, 600 kmFTCC1112E1PLL200GBASE-FR4, 2 kmFTCC8612E2PCM200GBASE-SR4, 100 m OM4FTCD8618E1PCMVR2200GBASE-VR2, 30 m OM3 / 50 m OM4FTCC1122E2PCL200GBASE-FR4, 500 mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales