- Home
- Optical Transceivers
- Finisar (Coherent)
- 800G
- FTCE8617E1PCA
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCE8617E1PCA stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCE8617E1PCA 2x400G SR4 OSFP 100 m
800 Gb/s 2x400G SR4 (800G SR8, dual MPO) OSFP transceiver, 850nm VCSEL x8, up to 100 m, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCE8617E1PCA
- Family
- FTCE8617
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCE8617E1PCA datasheet (PDF)
FTCE8617E1PCA specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCE8617E1PCA |
| Product family | FTCE8617 |
| Form factor | OSFP |
| Standards / application | 800G SR8 / 2x400G SR4; 800G Ethernet, IB NDR (EPS); electrical aligned to IEEE 802.3ck |
| Data rate | 850 Gb/s |
| Wavelength | 850 nm band |
| Laser | 8x VCSEL |
| Receiver | PIN |
| Reach | 100 m MMF |
| Connector | MPO-16 (PCM); dual MPO-12 (PCA) |
| Supply voltage | 3.3 V |
| Operating temperature | Commercial |
| Diagnostics | Digital, I2C management interface |
| Compliance | Laser eye Class 1M (EPS Global) |
| Lifecycle | Current production |
| Variant note | 800G (2x400 SR4), dual MPO-12 (EPS Global) |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCE8617E1PCA
The Finisar FTCE8617E1PCA (now a Coherent Corp. product, formerly II-VI) is a OSFP 2x400G SR4 (800G SR8, dual MPO) optical transceiver for 800 Gb/s links at 850nm VCSEL x8 over Parallel MMF, dual MPO12 APC, with reach up to 100 m. It is a commercial-temperature part. It belongs to Finisar's FTCE8617 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
- 2 x 400 Gigabit Ethernet or InfiniBand links
- 8x100G PAM4 retimed 106.25 Gb/s electrical interface
FTCE8617E1PCA: frequently asked questions
What is the Finisar FTCE8617E1PCA?
The FTCE8617E1PCA is a Finisar OSFP transceiver for 2x400G SR4 (800G SR8, dual MPO) at 800 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
What is the maximum distance of the FTCE8617E1PCA?
The FTCE8617E1PCA is specified for up to 100 m over Parallel MMF, dual MPO12 APC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTCE8617E1PCA use?
The FTCE8617E1PCA works at 850nm VCSEL x8 over Parallel MMF, dual MPO12 APC. Both ends of a link must use the same optical standard.
Does the FTCE8617E1PCA support DDM / digital diagnostics?
Yes. Digital, I2C management interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Will the FTCE8617E1PCA work in my Cisco, Juniper, Arista or HPE switch?
The FTCE8617E1PCA follows the OSFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCE8617E1PCA vs FTCE8617E1PCM: what is the difference?
Both are in Finisar's FTCE8617 family. They differ in build / application (2x400G SR4 (800G SR8, dual MPO) vs 800G SR8). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCE8617E1PCA rated for?
The FTCE8617E1PCA is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCE8617E1PCA part number mean?
The FTCE prefix marks Finisar's 800G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCE8617E1PCA genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCE8617E1PCA price in India and how do I order?
The Finisar FTCE8617E1PCA price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTCE8617E1PCA need?
It runs from 3.3 V.
Related Finisar parts
FTCE8617E1PCM800G SR8, 100 mFTCE8627E1PCA2x400G VR4, 50 m OM4FTCE4517E1PCM800G DR8, 500 mFTCE4527E1PCM800G DR8+, 2 kmFTCE4717E1PCB2x400G FR4, 2 kmFTCE3317E1CCL800ZR, -7 dBm, 120 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales