- Home
- Optical Transceivers
- Finisar (Coherent)
- 800G
- FTCE3326R1CCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCE3326R1CCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCE3326R1CCL OpenZR+ 800/600/400G, 0 QSFP-DD DCO 500 km
800 Gb/s OpenZR+ 800/600/400G, 0 dBm QSFP-DD DCO transceiver, C-band DWDM tunable, up to 500 km, extended temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCE3326R1CCL
- Family
- FTCE3326
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCE3326R1CCL datasheet (PDF)
FTCE3326R1CCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCE3326R1CCL |
| Product family | FTCE3326 |
| Form factor | QSFP-DD DCO |
| Standards / application | OIF 800ZR; ZR+/OpenZR+ |
| Data rate | 800G; ZR+ line modes 800G/600G/400G |
| Wavelength | C-band tunable |
| Laser | C-band 5 THz DWDM tunable; DP-16QAM/8QAM/QPSK |
| Receiver | Coherent |
| Reach | 120 km (E1); 750 km (R1PCL); 500 km (R1CCL); 1000 km (S1CCL) |
| Connector | LC, duplex SMF |
| Tx output power | 0 dBm high Tx (PCL pages); −2 dBm (E1CCL, brochure) |
| Operating temperature | Extended |
| Diagnostics | CMIS; digital |
| Lifecycle | Current production |
| Variant note | OpenZR+ 0 dBm, 500 km, 0–75 °C |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCE3326R1CCL
The Finisar FTCE3326R1CCL (now a Coherent Corp. product, formerly II-VI) is a QSFP-DD DCO OpenZR+ 800/600/400G, 0 dBm optical transceiver for 800 Gb/s links at C-band DWDM tunable over Duplex SMF, LC, with reach up to 500 km. It is an extended-temperature part. It belongs to Finisar's FTCE3326 family, which has 5 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
- High Tx output power
- Multi-rate 800G/600G/400G (ZR+)
- ROADM-compatible high Tx power
FTCE3326R1CCL: frequently asked questions
What is the Finisar FTCE3326R1CCL?
The FTCE3326R1CCL is a Finisar QSFP-DD DCO transceiver for OpenZR+ 800/600/400G, 0 dBm at 800 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
What is the maximum distance of the FTCE3326R1CCL?
The FTCE3326R1CCL is specified for up to 500 km over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCE3326R1CCL?
Per the Finisar family datasheet, the FTCE3326R1CCL transmits 0 dBm high Tx (PCL pages); −2 dBm (E1CCL, brochure).
Does the FTCE3326R1CCL support DDM / digital diagnostics?
Yes. CMIS; digital. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCE3326R1CCL use?
The FTCE3326R1CCL works at C-band DWDM tunable over Duplex SMF, LC. Both ends of a link must use the same optical standard.
Will the FTCE3326R1CCL work in my Cisco, Juniper, Arista or HPE switch?
The FTCE3326R1CCL follows the QSFP-DD DCO MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCE3326R1CCL vs FTCE3326E1PCL: what is the difference?
Both are in Finisar's FTCE3326 family. They differ in temperature grade (extended vs commercial); wavelength (C-band DWDM tunable vs C-band 5THz DWDM tunable); reach (500 km vs 120 km); build / application (OpenZR+ 800/600/400G, 0 dBm vs 800ZR, 0 dBm high power). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCE3326R1CCL rated for?
The FTCE3326R1CCL is an extended-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCE3326R1CCL part number mean?
The FTCE prefix marks Finisar's 800G family. The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCE3326R1CCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCE3326R1CCL price in India and how do I order?
The Finisar FTCE3326R1CCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
Related Finisar parts
FTCE3326E1PCL800ZR, 0 dBm high power, 120 kmFTCE3326E1CCL800ZR, -2 dBm, 120 kmFTCE3326R1PCLOpenZR+ 800/600/400G, 0 dBm, 750 kmFTCE3326S1CCL800G high-performance ZR+, 0 dBm, 1000 kmFTCE3316E1PCLOIF 800ZR, -7 dBm, 120 km (ZR)FTCE4516E1PCM800G DR8 / 2x400G DR4 / 8x100G, 500 mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales