- Home
- Optical Transceivers
- Finisar (Coherent)
- 100G
- FTLC1183RDNS
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLC1183RDNS stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLC1183RDNS 100GBASE-LR4 Gen2 CFP 10km
100 Gb/s 100GBASE-LR4 Gen2 (SC) CFP transceiver, LAN-WDM 1295-1310nm, up to 10km.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLC1183RDNS
- Family
- FTLC1183
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLC1183RDNS datasheet (PDF)
FTLC1183RDNS specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLC1183RDNS |
| Product family | FTLC1183 |
| Form factor | CFP |
| Standards / application | CFP MSA; IEEE 802.3ba 100GBASE-LR4; OTU4 4I1-9D1F per ITU-T G.959.1/G.709 (SDN*) |
| Data rate | 103.1 Gb/s (RDN*); 112 Gb/s with OTU3/OTU4 (SDN*) |
| Wavelength | 1310 nm band |
| Laser | 4x LWDM DFB laser |
| Receiver | PIN |
| Reach | 10 km SMF |
| Connector | Duplex LC |
| Supply voltage | 3.3 V |
| Operating temperature | 0 to 70 °C case |
| Diagnostics | Digital (MDIO) |
| Compliance | RoHS |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLC1183RDNS
The Finisar FTLC1183RDNS (now a Coherent Corp. product, formerly II-VI) is a CFP 100GBASE-LR4 Gen2 (SC) optical transceiver for 100 Gb/s links at LAN-WDM 1295-1310nm over SMF duplex (SC), with reach up to 10km. It belongs to Finisar's FTLC1183 family, which has 6 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
- 100 Gb/s · 100GBASE-LR4 Gen2 (SC) · up to 10km
- LAN-WDM 1295-1310nm · SMF duplex (SC)
- Part of the Finisar FTLC1183 family (6 variants)
- Genuine Finisar / Coherent optic · GST invoice
FTLC1183RDNS: frequently asked questions
What is the Finisar FTLC1183RDNS?
The FTLC1183RDNS is a Finisar CFP transceiver for 100GBASE-LR4 Gen2 (SC) at 100 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 100G Ethernet data-centre fabrics, DCI, metro aggregation and InfiniBand EDR.
What is the maximum distance of the FTLC1183RDNS?
The FTLC1183RDNS is specified for up to 10km over SMF duplex (SC). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTLC1183RDNS use?
The FTLC1183RDNS works at LAN-WDM 1295-1310nm over SMF duplex (SC). Both ends of a link must use the same optical standard.
Does the FTLC1183RDNS support DDM / digital diagnostics?
Yes. Digital (MDIO). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Will the FTLC1183RDNS work in my Cisco, Juniper, Arista or HPE switch?
The FTLC1183RDNS follows the CFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLC1183RDNS vs FTLC1183RDNL: what is the difference?
Both are in Finisar's FTLC1183 family. They differ in build / application (100GBASE-LR4 Gen2 (SC) vs 100GBASE-LR4 Gen2). Pick the variant that matches your temperature, latch and wavelength needs.
What does the FTLC1183RDNS part number mean?
The FTLC prefix marks Finisar's 100G family (QSFP28 / CFP / CFP2 / CFP4). The remaining characters identify the optical design and build variant.
Is your FTLC1183RDNS genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLC1183RDNS price in India and how do I order?
The Finisar FTLC1183RDNS price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLC1183RDNS need?
It runs from 3.3 V.
Related Finisar parts
FTLC1183RDNL100GBASE-LR4 Gen2, 10kmFTLC1183RDNA100GBASE-LR4 Gen2, 10kmFTLC1183SDNL100GBASE-LR4 + OTN multirate Gen2, 10kmFTLC1183SDNA100GBASE-LR4 + OTN multirate Gen2, 10kmFTLC1183SDNS100GBASE-LR4 + OTN multirate Gen2, 10kmFTLC1122RDNL100GBASE-LR4 Gen2, 10kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales