- Home
- Optical Transceivers
- Finisar (Coherent)
- 400G
- FTCD4523E2PCM-4A
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCD4523E2PCM-4A stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCD4523E2PCM-4A 400GBASE-DR4 QSFP-DD 500 m
400 Gb/s 400GBASE-DR4 (400G mode preset) QSFP-DD transceiver, 1310nm EML x4, up to 500 m, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCD4523E2PCM-4A
- Family
- FTCD4523
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCD4523E2PCM-4A datasheet (PDF)
FTCD4523E2PCM-4A specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCD4523E2PCM-4A |
| Product family | FTCD4523 |
| Form factor | QSFP-DD |
| Standards / application | IEEE P802.3bs 400GBASE-DR4; QSFP-DD MSA; QSFP28 MSA; PSM4 MSA |
| Data rate | 425 Gb/s (4x 53.125 GBd PAM4 optical; 8x 26.5625 GBd electrical) |
| Wavelength | 1304.5–1317.5 nm |
| Laser | 4x EML (Class 1) |
| Receiver | PIN |
| Reach | 500 m on SMF |
| Connector | Parallel MPO-12 |
| Tx output power | −0.8 to 4.2 dBm OMA per lane (E2); −2.9 dBm min avg (E3, informative) |
| Rx sensitivity | −4.4 dBm OMA per lane |
| Rx overload / max input | 5 dBm damage threshold |
| Extinction ratio | 3.5 dB min |
| Supply voltage | 3.3 V (3.135–3.465 V) |
| Power dissipation | < 12 W c-temp / < 10 W limited temp (E2); < 8 W (E3) |
| Operating temperature | Commercial |
| Diagnostics | I2C-based diagnostics interface |
| Compliance | RoHS-6 |
| Lifecycle | Current production |
| Variant note | Application select 1 set to 400G mode |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCD4523E2PCM-4A
The Finisar FTCD4523E2PCM-4A (now a Coherent Corp. product, formerly II-VI) is a QSFP-DD 400GBASE-DR4 (400G mode preset) optical transceiver for 400 Gb/s links at 1310nm EML x4 over Parallel SMF, MPO12, with reach up to 500 m. It is a commercial-temperature part. It belongs to Finisar's FTCD4523 family, which has 5 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
- Hot-pluggable QSFP-DD type 2 form factor
- Supports 425Gb/s aggregate bit rate
- 4x100Gb/s PAM4 serial lanes
- 8x50G PAM4 retimed electrical interface
- Parallel MPO receptacle
- I2C management interface
FTCD4523E2PCM-4A: frequently asked questions
What is the Finisar FTCD4523E2PCM-4A?
The FTCD4523E2PCM-4A is a Finisar QSFP-DD transceiver for 400GBASE-DR4 (400G mode preset) at 400 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
What is the maximum distance of the FTCD4523E2PCM-4A?
The FTCD4523E2PCM-4A is specified for up to 500 m over Parallel SMF, MPO12. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCD4523E2PCM-4A?
Per the Finisar family datasheet, the FTCD4523E2PCM-4A transmits −0.8 to 4.2 dBm OMA per lane (E2); −2.9 dBm min avg (E3, informative) and has a receiver sensitivity of −4.4 dBm OMA per lane. Maximum receiver input is 5 dBm damage threshold.
Does the FTCD4523E2PCM-4A support DDM / digital diagnostics?
Yes. I2C-based diagnostics interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCD4523E2PCM-4A use?
The FTCD4523E2PCM-4A works at 1310nm EML x4 over Parallel SMF, MPO12. Both ends of a link must use the same optical standard.
Will the FTCD4523E2PCM-4A work in my Cisco, Juniper, Arista or HPE switch?
The FTCD4523E2PCM-4A follows the QSFP-DD MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCD4523E2PCM-4A vs FTCD4523E2PCM: what is the difference?
Both are in Finisar's FTCD4523 family. They differ in build / application (400GBASE-DR4 (400G mode preset) vs 400GBASE-DR4 (default 4x100G mode)). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCD4523E2PCM-4A rated for?
The FTCD4523E2PCM-4A is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCD4523E2PCM-4A part number mean?
The FTCD prefix marks Finisar's 400G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCD4523E2PCM-4A genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCD4523E2PCM-4A price in India and how do I order?
The Finisar FTCD4523E2PCM-4A price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTCD4523E2PCM-4A need?
It runs from 3.3 V (3.135–3.465 V) with power dissipation of < 12 W c-temp / < 10 W limited temp (E2); < 8 W (E3).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTCD4523E2PCM400GBASE-DR4, 500 mFTCD4523E2PLM400GBASE-DR4, 500 mFTCD4523E2PLM-4A400GBASE-DR4, 500 mFTCD4523E3PCM400GBASE-DR4 Gen3, 500 mFTCD4313E2PCL400GBASE-FR4, 2 kmFTCD4323E3PCL400GBASE-LR4-10 Gen3, 10 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales