- Home
- Optical Transceivers
- Finisar (Coherent)
- 400G
- FTCD3323R1PCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCD3323R1PCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCD3323R1PCL OpenZR+ 400/300/200G, 0 QSFP-DD DCO 600 km
400 Gb/s OpenZR+ 400/300/200G, 0 dBm QSFP-DD DCO transceiver, C-band 5THz DWDM tunable, up to 600 km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCD3323R1PCL
- Family
- FTCD3323
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCD3323R1PCL datasheet (PDF)
FTCD3323R1PCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCD3323R1PCL |
| Product family | FTCD3323 |
| Form factor | QSFP-DD DCO |
| Standards / application | OIF 400ZR; OpenZR+ MSA |
| Data rate | 400G (478–481 Gb/s) |
| Wavelength | C-band tunable |
| Laser | C-band 5 THz DWDM tunable; DP-16QAM/8QAM/QPSK |
| Receiver | Coherent |
| Reach | 120 km (E1/E2); 600 km (R1); 1000 km (R2); 2000 km (S1); 2400 km (T1) |
| Connector | LC, duplex SMF |
| Tx output power | 0 dBm (high Tx power) |
| Operating temperature | Commercial |
| Diagnostics | CMIS; digital |
| Lifecycle | Current production |
| Variant note | ZR+ 400G/300G/200G, 0 dBm, 600 km |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCD3323R1PCL
The Finisar FTCD3323R1PCL (now a Coherent Corp. product, formerly II-VI) is a QSFP-DD DCO OpenZR+ 400/300/200G, 0 dBm optical transceiver for 400 Gb/s links at C-band 5THz DWDM tunable over Duplex SMF, LC, with reach up to 600 km. It is a commercial-temperature part. It belongs to Finisar's FTCD3323 family, which has 7 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
- High Tx output power (0 dBm)
- C-band tunable
- Pull tab
FTCD3323R1PCL: frequently asked questions
What is the Finisar FTCD3323R1PCL?
The FTCD3323R1PCL is a Finisar QSFP-DD DCO transceiver for OpenZR+ 400/300/200G, 0 dBm at 400 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
What is the maximum distance of the FTCD3323R1PCL?
The FTCD3323R1PCL is specified for up to 600 km over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCD3323R1PCL?
Per the Finisar family datasheet, the FTCD3323R1PCL transmits 0 dBm (high Tx power).
Does the FTCD3323R1PCL support DDM / digital diagnostics?
Yes. CMIS; digital. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCD3323R1PCL use?
The FTCD3323R1PCL works at C-band 5THz DWDM tunable over Duplex SMF, LC. Both ends of a link must use the same optical standard.
Will the FTCD3323R1PCL work in my Cisco, Juniper, Arista or HPE switch?
The FTCD3323R1PCL follows the QSFP-DD DCO MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCD3323R1PCL vs FTCD3323E1PCL: what is the difference?
Both are in Finisar's FTCD3323 family. They differ in reach (600 km vs 120 km); build / application (OpenZR+ 400/300/200G, 0 dBm vs OIF 400ZR, 0 dBm high power). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCD3323R1PCL rated for?
The FTCD3323R1PCL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCD3323R1PCL part number mean?
The FTCD prefix marks Finisar's 400G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCD3323R1PCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCD3323R1PCL price in India and how do I order?
The Finisar FTCD3323R1PCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
Related Finisar parts
FTCD3323E1PCLOIF 400ZR, 0 dBm high power, 120 kmFTCD3323E1PCL-1YOIF 400ZR, 0 dBm, 120 kmFTCD3323E2PCL400ZR Gen2, 0 dBm, 120 kmFTCD3323R2PCLOpenZR+ Gen2, 0 dBm, 1000 kmFTCD3323S1CCL400G high-performance ZR+, 0 dBm, 2000 kmFTCD3323T1CCL400G ULH, 0 dBm, 2400 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales