- Home
- Optical Transceivers
- Finisar (Coherent)
- 800G
- FTCE3316E1PCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCE3316E1PCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCE3316E1PCL OIF 800ZR, -7 dBm QSFP-DD DCO 120 km
800 Gb/s OIF 800ZR, -7 dBm QSFP-DD DCO transceiver, C-band DWDM tunable, up to 120 km (ZR), commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCE3316E1PCL
- Family
- FTCE3316
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCE3316E1PCL datasheet (PDF)
FTCE3316E1PCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCE3316E1PCL |
| Product family | FTCE3316 |
| Form factor | QSFP-DD DCO |
| Standards / application | OIF 800ZR |
| Data rate | 800 Gb/s |
| Wavelength | C-band tunable |
| Laser | C-band DWDM tunable; DP-16QAM/8QAM/QPSK |
| Receiver | Coherent |
| Reach | 120 km (800ZR; brochure); page also lists 1000 km operating distance |
| Connector | LC |
| Tx output power | −7 dBm (standard Tx power) |
| Operating temperature | Commercial |
| Diagnostics | CMIS |
| Lifecycle | Current production |
| Variant note | OIF 800ZR, −7 dBm |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCE3316E1PCL
The Finisar FTCE3316E1PCL (now a Coherent Corp. product, formerly II-VI) is a QSFP-DD DCO OIF 800ZR, -7 dBm optical transceiver for 800 Gb/s links at C-band DWDM tunable over Duplex SMF, LC, with reach up to 120 km (ZR). It is a commercial-temperature part. It belongs to Finisar's FTCE3316 family, which has 3 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
- DCI up to 120 km
- IP over DWDM
FTCE3316E1PCL: frequently asked questions
What is the Finisar FTCE3316E1PCL?
The FTCE3316E1PCL is a Finisar QSFP-DD DCO transceiver for OIF 800ZR, -7 dBm at 800 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
What is the maximum distance of the FTCE3316E1PCL?
The FTCE3316E1PCL is specified for up to 120 km (ZR) over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCE3316E1PCL?
Per the Finisar family datasheet, the FTCE3316E1PCL transmits −7 dBm (standard Tx power).
Does the FTCE3316E1PCL support DDM / digital diagnostics?
Yes. CMIS. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCE3316E1PCL use?
The FTCE3316E1PCL works at C-band DWDM tunable over Duplex SMF, LC. Both ends of a link must use the same optical standard.
Will the FTCE3316E1PCL work in my Cisco, Juniper, Arista or HPE switch?
The FTCE3316E1PCL follows the QSFP-DD DCO MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCE3316E1PCL vs FTCE3316E1CCL: what is the difference?
Both are in Finisar's FTCE3316 family. They differ in temperature grade (commercial vs extended); reach (120 km (ZR) vs 120 km); build / application (OIF 800ZR, -7 dBm vs 800ZR, -7 dBm). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCE3316E1PCL rated for?
The FTCE3316E1PCL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCE3316E1PCL part number mean?
The FTCE prefix marks Finisar's 800G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCE3316E1PCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCE3316E1PCL price in India and how do I order?
The Finisar FTCE3316E1PCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
Related Finisar parts
FTCE3316E1CCL800ZR, -7 dBm, 120 kmFTCE3316R1PCL800G OpenZR+FTCE3326E1PCL800ZR, 0 dBm high power, 120 kmFTCE4516E1PCM800G DR8 / 2x400G DR4 / 8x100G, 500 mFTCE3L26E1PCLOIF 800ZR, 0 dBm, L-band, 120 kmFTCE4526E1PCM800G DR8+, 2 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales