- Home
- Optical Transceivers
- Finisar (Coherent)
- 400G
- FTCD3323E1PCL-1Y
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCD3323E1PCL-1Y stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCD3323E1PCL-1Y OIF 400ZR, 0 dBm QSFP-DD DCO 120 km
400 Gb/s OIF 400ZR, 0 dBm (customer/config variant) QSFP-DD DCO transceiver, C-band DWDM tunable, up to 120 km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCD3323E1PCL-1Y
- Family
- FTCD3323
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCD3323E1PCL-1Y datasheet (PDF)
FTCD3323E1PCL-1Y specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCD3323E1PCL-1Y |
| Product family | FTCD3323 |
| Form factor | QSFP-DD DCO |
| Standards / application | OIF 400ZR; OpenZR+ MSA |
| Data rate | 400G (478–481 Gb/s) |
| Wavelength | C-band tunable |
| Laser | C-band 5 THz DWDM tunable; DP-16QAM/8QAM/QPSK |
| Receiver | Coherent |
| Reach | 120 km (E1/E2); 600 km (R1); 1000 km (R2); 2000 km (S1); 2400 km (T1) |
| Connector | LC, duplex SMF |
| Tx output power | 0 dBm (high Tx power) |
| Operating temperature | Commercial |
| Diagnostics | CMIS; digital |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCD3323E1PCL-1Y
The Finisar FTCD3323E1PCL-1Y (now a Coherent Corp. product, formerly II-VI) is a QSFP-DD DCO OIF 400ZR, 0 dBm (customer/config variant) optical transceiver for 400 Gb/s links at C-band DWDM tunable over Duplex SMF, LC, with reach up to 120 km. It is a commercial-temperature part. It belongs to Finisar's FTCD3323 family, which has 7 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
- High Tx output power (0 dBm)
- C-band tunable
- Pull tab
FTCD3323E1PCL-1Y: frequently asked questions
What is the Finisar FTCD3323E1PCL-1Y?
The FTCD3323E1PCL-1Y is a Finisar QSFP-DD DCO transceiver for OIF 400ZR, 0 dBm (customer/config variant) at 400 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
What is the maximum distance of the FTCD3323E1PCL-1Y?
The FTCD3323E1PCL-1Y is specified for up to 120 km over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCD3323E1PCL-1Y?
Per the Finisar family datasheet, the FTCD3323E1PCL-1Y transmits 0 dBm (high Tx power).
Does the FTCD3323E1PCL-1Y support DDM / digital diagnostics?
Yes. CMIS; digital. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCD3323E1PCL-1Y use?
The FTCD3323E1PCL-1Y works at C-band DWDM tunable over Duplex SMF, LC. Both ends of a link must use the same optical standard.
Will the FTCD3323E1PCL-1Y work in my Cisco, Juniper, Arista or HPE switch?
The FTCD3323E1PCL-1Y follows the QSFP-DD DCO MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCD3323E1PCL-1Y vs FTCD3323E1PCL: what is the difference?
Both are in Finisar's FTCD3323 family. They differ in wavelength (C-band DWDM tunable vs C-band 5THz DWDM tunable); build / application (OIF 400ZR, 0 dBm (customer/config variant) vs OIF 400ZR, 0 dBm high power). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCD3323E1PCL-1Y rated for?
The FTCD3323E1PCL-1Y is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCD3323E1PCL-1Y part number mean?
The FTCD prefix marks Finisar's 400G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCD3323E1PCL-1Y genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCD3323E1PCL-1Y price in India and how do I order?
The Finisar FTCD3323E1PCL-1Y price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
Related Finisar parts
FTCD3323E1PCLOIF 400ZR, 0 dBm high power, 120 kmFTCD3323E2PCL400ZR Gen2, 0 dBm, 120 kmFTCD3323R1PCLOpenZR+ 400/300/200G, 0 dBm, 600 kmFTCD3323R2PCLOpenZR+ Gen2, 0 dBm, 1000 kmFTCD3323S1CCL400G high-performance ZR+, 0 dBm, 2000 kmFTCD3323T1CCL400G ULH, 0 dBm, 2400 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales