Next Gen Networks

FTEN2215P1CUN

Finisar FTEN2215P1CUN EPON ONU-on-a-stick PX10 SFP 10km | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 100M–1G
  5. FTEN2215P1CUN
≤1G SFP OPTICAL TRANSCEIVERCURRENT PRODUCTION

Finisar FTEN2215P1CUN EPON ONU-on-a-stick PX10 SFP 10km

1 Gb/s EPON ONU-on-a-stick PX10 SFP transceiver, Tx 1310nm / Rx 1490nm (BiDi), up to 10km, commercial (−20 to 70 °c) temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FTEN2215P1CUN
Family
FTEN2215P1xUN
Category
Fiber optic transceiver modules
Datasheet
FTEN2215P1CUN datasheet (PDF)
1 Gb/sTx 1310nm / Rx 1490nm10kmSFPCommercial tempHot-pluggable

FTEN2215P1CUN specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFTEN2215P1CUN
Product familyFTEN2215P1xUN
Form factorSFP (SC, single-fiber)
Standards / applicationIEEE 802.3ah EPON PX10 ONU
Data rate1.25 Gb/s symmetric (1250 Mb/s)
WavelengthTx 1310 nm (1260–1360 nm) upstream; Rx 1490 nm (1480–1500 nm) downstream
ReceiverPIN (per EPS Global product page)
Reach10 km (EPS Global; datasheet gives PX10 link budget class)
ConnectorSingle-fiber bi-directional SC receptacle
Tx output power−1 to +4 dBm
Rx sensitivity−25 dBm
Rx overload / max input−3 dBm
Extinction ratio9 dB
Supply voltage3.3 V (3.15–3.45 V)
Power dissipationSupply current 500 typ / 620 max mA
Operating temperatureCommercial (−20 to 70 °C)
DiagnosticsBuilt-in digital diagnostics via 2-wire serial bus
ComplianceIEEE 802.3ah EPON
LifecycleCurrent production
Variant notePX10, DPoE OAM, −20 to 70 °C, 10 km (EPS Global listing)

Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.

About the Finisar FTEN2215P1CUN

The Finisar FTEN2215P1CUN (now a Coherent Corp. product, formerly II-VI) is a SFP (SC, single-fiber) EPON ONU-on-a-stick PX10 optical transceiver for 1 Gb/s links at Tx 1310nm / Rx 1490nm (BiDi) over SMF, with reach up to 10km. It is a commercial-temperature part rated −20 to 70 °C. It belongs to Finisar's FTEN2215P1xUN family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.

  • EPON ONU in MSA SFP footprint
  • Compliance with IEEE 802.3ah
  • DPoE OAM compliance (per EPS Global listing)
  • Built-in digital diagnostics functions
  • Compatibility with EPON OLTs and CPE equipment

FTEN2215P1CUN: frequently asked questions

What is the Finisar FTEN2215P1CUN?

The FTEN2215P1CUN is a Finisar SFP (SC, single-fiber) transceiver for EPON ONU-on-a-stick PX10 at 1 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.

What is the maximum distance of the FTEN2215P1CUN?

The FTEN2215P1CUN is specified for up to 10km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

What is the optical power budget of the FTEN2215P1CUN?

Per the Finisar family datasheet, the FTEN2215P1CUN transmits −1 to +4 dBm and has a receiver sensitivity of −25 dBm. Maximum receiver input is −3 dBm.

Does the FTEN2215P1CUN support DDM / digital diagnostics?

Yes. Built-in digital diagnostics via 2-wire serial bus. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

Which fiber and connector does the FTEN2215P1CUN use?

The FTEN2215P1CUN works at Tx 1310nm / Rx 1490nm (BiDi) over SMF. Both ends of a link must use the same optical standard.

Will the FTEN2215P1CUN work in my Cisco, Juniper, Arista or HPE switch?

The FTEN2215P1CUN follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

FTEN2215P1CUN vs FTEN2215P1CUN-BC: what is the difference?

Both are in Finisar's FTEN2215P1xUN family. They differ in build / application (EPON ONU-on-a-stick PX10 vs EPON ONU-on-a-stick PX10, -BC build). Pick the variant that matches your temperature, latch and wavelength needs.

What temperature range is the FTEN2215P1CUN rated for?

The FTEN2215P1CUN is a commercial-temperature part rated −20 to 70 °C. Choose an industrial (T) variant for outdoor or uncontrolled sites.

What does the FTEN2215P1CUN part number mean?

The FTEN prefix marks Finisar's EPON ONU SFP family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.

Is your FTEN2215P1CUN genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FTEN2215P1CUN price in India and how do I order?

The Finisar FTEN2215P1CUN price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FTEN2215P1CUN need?

It runs from 3.3 V (3.15–3.45 V) with power dissipation of Supply current 500 typ / 620 max mA.

Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.