- Home
- Optical Transceivers
- Finisar (Coherent)
- 800G
- FTCE3327S1CCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCE3327S1CCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCE3327S1CCL 800G high-performance OSFP DCO 1000 km
800 Gb/s 800G high-performance ZR+, 0 dBm OSFP DCO transceiver, C-band DWDM tunable, up to 1000 km, extended temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCE3327S1CCL
- Family
- FTCE3327
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCE3327S1CCL datasheet (PDF)
FTCE3327S1CCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCE3327S1CCL |
| Product family | FTCE3327 |
| Form factor | OSFP DCO |
| Standards / application | 800ZR; ZR+/OpenZR+ |
| Data rate | 800G (825 Gb/s); line modes 800G/600G/400G |
| Wavelength | C-band tunable |
| Laser | C-band 5 THz DWDM tunable; DP-16QAM/8QAM/QPSK |
| Receiver | Coherent |
| Reach | 120 km (E1); 500 km (R1); 1000 km (S1CCL) |
| Connector | LC, duplex SMF |
| Tx output power | 0 dBm |
| Operating temperature | Extended |
| Diagnostics | CMIS |
| Lifecycle | Current production |
| Variant note | High-Performance 0 dBm, 1000 km, 0–75 °C |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCE3327S1CCL
The Finisar FTCE3327S1CCL (now a Coherent Corp. product, formerly II-VI) is a OSFP DCO 800G high-performance ZR+, 0 dBm optical transceiver for 800 Gb/s links at C-band DWDM tunable over Duplex SMF, LC, with reach up to 1000 km. It is an extended-temperature part. It belongs to Finisar's FTCE3327 family, which has 5 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
- Multi-rate 800G/600G/400G
- High Tx power for ROADM line systems
- DCI up to 120 km; metro/regional > 500 km
FTCE3327S1CCL: frequently asked questions
What is the Finisar FTCE3327S1CCL?
The FTCE3327S1CCL is a Finisar OSFP DCO transceiver for 800G high-performance ZR+, 0 dBm at 800 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 800G AI/ML back-end fabrics, hyperscale spine layers and 800ZR coherent DCI.
What is the maximum distance of the FTCE3327S1CCL?
The FTCE3327S1CCL is specified for up to 1000 km over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCE3327S1CCL?
Per the Finisar family datasheet, the FTCE3327S1CCL transmits 0 dBm.
Does the FTCE3327S1CCL support DDM / digital diagnostics?
Yes. CMIS. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCE3327S1CCL use?
The FTCE3327S1CCL works at C-band DWDM tunable over Duplex SMF, LC. Both ends of a link must use the same optical standard.
Will the FTCE3327S1CCL work in my Cisco, Juniper, Arista or HPE switch?
The FTCE3327S1CCL follows the OSFP DCO MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCE3327S1CCL vs FTCE3327E1PCL: what is the difference?
Both are in Finisar's FTCE3327 family. They differ in temperature grade (extended vs commercial); wavelength (C-band DWDM tunable vs C-band 5THz DWDM tunable); reach (1000 km vs 120 km); build / application (800G high-performance ZR+, 0 dBm vs 800ZR, 0 dBm). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCE3327S1CCL rated for?
The FTCE3327S1CCL is an extended-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCE3327S1CCL part number mean?
The FTCE prefix marks Finisar's 800G family. The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCE3327S1CCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCE3327S1CCL price in India and how do I order?
The Finisar FTCE3327S1CCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
Related Finisar parts
FTCE3327E1PCL800ZR, 0 dBm, 120 kmFTCE3327E1CCL800ZR, 0 dBm, 120 kmFTCE3327R1PCLOpenZR+ 800/600/400G, 0 dBm, 500-750 kmFTCE3327R1CCLOpenZR+ 800/600/400G, 0 dBm, 500 kmFTCE3317E1CCL800ZR, -7 dBm, 120 kmFTCE4517E1PCM800G DR8, 500 mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales