Next Gen Networks

FTEN2117P1NUN-BC

Finisar FTEN2117P1NUN-BC EPON ONU-on-a-stick PX20+ SFP 20km | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 100M–1G
  5. FTEN2117P1NUN-BC
≤1G SFP OPTICAL TRANSCEIVERCURRENT PRODUCTION

Finisar FTEN2117P1NUN-BC EPON ONU-on-a-stick PX20+ SFP 20km

1 Gb/s EPON ONU-on-a-stick PX20+ (CTC/DPoE OAM), -BC build SFP transceiver, Tx 1310nm / Rx 1490nm (BiDi), up to 20km, extended temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FTEN2117P1NUN-BC
Family
FTEN2117P1xUN
Category
Fiber optic transceiver modules
Datasheet
FTEN2117P1NUN-BC datasheet (PDF)
1 Gb/sTx 1310nm / Rx 1490nm20kmSFPExtended tempHot-pluggable

FTEN2117P1NUN-BC specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFTEN2117P1NUN-BC
Product familyFTEN2117P1xUN
Form factorSFP (SC, single-fiber)
Standards / applicationIEEE 802.3ah EPON PX20+ ONU
Data rate1.25 Gb/s symmetric (1250 Mb/s)
WavelengthTx 1310 nm (1290–1330 nm) upstream; Rx 1490 nm (1480–1500 nm) downstream
ReceiverPIN (per EPS Global product page)
Reach20 km (EPS Global; datasheet gives PX20+ link budget class)
ConnectorSingle-fiber bi-directional SC receptacle
Tx output power0 to +4 dBm
Rx sensitivity−27 dBm
Rx overload / max input−3 dBm
Extinction ratio9 dB
Supply voltage3.3 V (3.15–3.45 V)
Power dissipationSupply current 500 typ / 620 max mA
Operating temperatureExtended
DiagnosticsBuilt-in digital diagnostics via 2-wire serial bus
ComplianceIEEE 802.3ah EPON
LifecycleCurrent production
Variant note-BC = extended case temperature −30 to 85 °C

Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.

About the Finisar FTEN2117P1NUN-BC

The Finisar FTEN2117P1NUN-BC (now a Coherent Corp. product, formerly II-VI) is a SFP (SC, single-fiber) EPON ONU-on-a-stick PX20+ (CTC/DPoE OAM), -BC build optical transceiver for 1 Gb/s links at Tx 1310nm / Rx 1490nm (BiDi) over SMF, with reach up to 20km. It is an extended-temperature part. It belongs to Finisar's FTEN2117P1xUN family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.

  • EPON ONU in MSA SFP footprint
  • Compliance with IEEE 802.3ah
  • Supports CTC OAM (per EPS Global listing)
  • Built-in digital diagnostics functions
  • Compatibility with EPON OLTs and CPE equipment

FTEN2117P1NUN-BC: frequently asked questions

What is the Finisar FTEN2117P1NUN-BC?

The FTEN2117P1NUN-BC is a Finisar SFP (SC, single-fiber) transceiver for EPON ONU-on-a-stick PX20+ (CTC/DPoE OAM), -BC build at 1 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.

What is the maximum distance of the FTEN2117P1NUN-BC?

The FTEN2117P1NUN-BC is specified for up to 20km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

What is the optical power budget of the FTEN2117P1NUN-BC?

Per the Finisar family datasheet, the FTEN2117P1NUN-BC transmits 0 to +4 dBm and has a receiver sensitivity of −27 dBm. Maximum receiver input is −3 dBm.

Does the FTEN2117P1NUN-BC support DDM / digital diagnostics?

Yes. Built-in digital diagnostics via 2-wire serial bus. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

Which fiber and connector does the FTEN2117P1NUN-BC use?

The FTEN2117P1NUN-BC works at Tx 1310nm / Rx 1490nm (BiDi) over SMF. Both ends of a link must use the same optical standard.

Will the FTEN2117P1NUN-BC work in my Cisco, Juniper, Arista or HPE switch?

The FTEN2117P1NUN-BC follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

FTEN2117P1NUN-BC vs FTEN2117P1NUN: what is the difference?

Both are in Finisar's FTEN2117P1xUN family. They differ in build / application (EPON ONU-on-a-stick PX20+ (CTC/DPoE OAM), -BC build vs EPON ONU-on-a-stick PX20+ (CTC/DPoE OAM)). Pick the variant that matches your temperature, latch and wavelength needs.

What temperature range is the FTEN2117P1NUN-BC rated for?

The FTEN2117P1NUN-BC is an extended-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.

What does the FTEN2117P1NUN-BC part number mean?

The FTEN prefix marks Finisar's EPON ONU SFP family. The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.

Is your FTEN2117P1NUN-BC genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FTEN2117P1NUN-BC price in India and how do I order?

The Finisar FTEN2117P1NUN-BC price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FTEN2117P1NUN-BC need?

It runs from 3.3 V (3.15–3.45 V) with power dissipation of Supply current 500 typ / 620 max mA.

Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.