- Home
- Optical Transceivers
- Finisar (Coherent)
- 200G
- FTCC1122E1PLL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCC1122E1PLL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCC1122E1PLL 200G FR4 500m, limited QSFP56 1310nm CWDM4 500 m
200 Gb/s 200G FR4 500m, limited temp QSFP56 transceiver, 1310nm CWDM4, up to 500 m.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCC1122E1PLL
- Family
- FTCC1122
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCC1122E1PLL datasheet (PDF)
FTCC1122E1PLL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCC1122E1PLL |
| Product family | FTCC1122 |
| Form factor | QSFP56 |
| Standards / application | IEEE P802.3bs 200GBASE-FR4 (FR4 Lite, 500 m); QSFP MSA; CMIS 4.0 |
| Data rate | 212.5 Gb/s aggregate (4x 26.5625 GBd PAM4) |
| Wavelength | CWDM 1264.5–1337.5 nm (centres 1271/1291/1311/1331 nm) |
| Laser | 4x50Gb/s CWDM DFB transmitter |
| Receiver | PIN |
| Reach | 500 m on SMF |
| Connector | Duplex LC |
| Tx output power | −4.2 to 4.7 dBm per lane |
| Rx sensitivity | −6.5 dBm OMAouter per lane |
| Rx overload / max input | 4.7 dBm avg receive power; 5.7 dBm damage threshold |
| Extinction ratio | 3.5 dB min |
| Supply voltage | 3.3 V (3.135–3.465 V) |
| Power dissipation | 6 W max |
| Operating temperature | 0 to 70 °C case (E2PCL) |
| Diagnostics | I2C-based diagnostics interface |
| Compliance | RoHS-6 |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCC1122E1PLL
The Finisar FTCC1122E1PLL (now a Coherent Corp. product, formerly II-VI) is a QSFP56 200G FR4 500m, limited temp optical transceiver for 200 Gb/s links at 1310nm CWDM4 over Duplex SMF, LC, with reach up to 500 m. It belongs to Finisar's FTCC1122 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 200G Ethernet / HDR fabrics and coherent DCI.
- Hot-pluggable QSFP56 form factor
- Supports 212.5Gb/s aggregate bit rate
- 4x50G PAM4 electrical interface (200GAUI-4)
- 4x50Gb/s CWDM transmitter
FTCC1122E1PLL: frequently asked questions
What is the Finisar FTCC1122E1PLL?
The FTCC1122E1PLL is a Finisar QSFP56 transceiver for 200G FR4 500m, limited temp at 200 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 200G Ethernet / HDR fabrics and coherent DCI.
What is the maximum distance of the FTCC1122E1PLL?
The FTCC1122E1PLL is specified for up to 500 m over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCC1122E1PLL?
Per the Finisar family datasheet, the FTCC1122E1PLL transmits −4.2 to 4.7 dBm per lane and has a receiver sensitivity of −6.5 dBm OMAouter per lane. Maximum receiver input is 4.7 dBm avg receive power; 5.7 dBm damage threshold.
Does the FTCC1122E1PLL support DDM / digital diagnostics?
Yes. I2C-based diagnostics interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCC1122E1PLL use?
The FTCC1122E1PLL works at 1310nm CWDM4 over Duplex SMF, LC. CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.
Will the FTCC1122E1PLL work in my Cisco, Juniper, Arista or HPE switch?
The FTCC1122E1PLL follows the QSFP56 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCC1122E1PLL vs FTCC1122E2PCL: what is the difference?
Both are in Finisar's FTCC1122 family. They differ in build / application (200G FR4 500m, limited temp vs 200GBASE-FR4 (500m variant)). Pick the variant that matches your temperature, latch and wavelength needs.
What does the FTCC1122E1PLL part number mean?
The FTCC prefix marks Finisar's 200G family. The remaining characters identify the optical design and build variant.
Is your FTCC1122E1PLL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCC1122E1PLL price in India and how do I order?
The Finisar FTCC1122E1PLL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTCC1122E1PLL need?
It runs from 3.3 V (3.135–3.465 V) with power dissipation of 6 W max.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTCC1122E2PCL200GBASE-FR4, 500 mFTCC1112E1PLL200GBASE-FR4, 2 kmFTCC8612E2PCM200GBASE-SR4, 100 m OM4FTCD8618E1PCMVR2200GBASE-VR2, 30 m OM3 / 50 m OM4FTCC8633E1PCM200G SR8, 100 mFTCC3311M1BCL200G/100G metro DCO, DP-QPSK/16QAM, 600 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales