Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF1429P3BCVA stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF1429P3BCVA 16GFC LW SFP+ 1310nm 10km
14.025 Gb/s (16GFC) 16GFC LW (4/8/16GFC), A-revision ordering code SFP+ transceiver, 1310nm, up to 10km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF1429P3BCVA
- Family
- FTLF1429
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF1429P3BCVA datasheet (PDF)
FTLF1429P3BCVA specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF1429P3BCVA |
| Product family | FTLF1429 |
| Form factor | SFP+ |
| Standards / application | FC-PI-5 Rev 6.10; SFF-8472 Rev 11.0; SFF-8081; SFF-8432 |
| Data rate | 4.25 / 8.5 / 14.025 Gb/s Fibre Channel |
| Wavelength | 1260–1370 nm |
| Laser | 1310 nm DFB |
| Receiver | PIN |
| Reach | Up to 10 km on 9/125 µm SMF |
| Connector | Duplex LC |
| Tx output power | −5.0 to +2.0 dBm @14.025G; −5.0 to −1.0 dBm @4.25/8.5G |
| Rx sensitivity | 0.063 / 0.042 / 0.029 mW OMA @14.025/8.5/4.25G |
| Rx overload / max input | +2.0 dBm |
| Supply voltage | 3.3 V (3.15–3.45 V) |
| Power dissipation | 1 W max with established link |
| Operating temperature | Commercial |
| Diagnostics | Digital diagnostics, 2-wire per SFP MSA / SFF-8472 |
| Compliance | RoHS 2011/65/EU; Class 1 laser (FDA/CDRH, EN/IEC 60825) |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF1429P3BCVA
The Finisar FTLF1429P3BCVA (now a Coherent Corp. product, formerly II-VI) is a SFP+ 16GFC LW (4/8/16GFC), A-revision ordering code optical transceiver for 14.025 Gb/s (16GFC) links at 1310nm over SMF, with reach up to 10km. It is a commercial-temperature part. It belongs to Finisar's FTLF1429 family, which has 4 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 16G Fibre Channel SAN switches and HBAs.
- Up to 14.025 Gb/s bi-directional data links
- 1310nm DFB laser transmitter
- Up to 10 km on 9/125μm SMF
- 1W maximum power consumption with established link
- Built-in digital diagnostic functions
- Metal enclosure, for lower EMI
FTLF1429P3BCVA: frequently asked questions
What is the Finisar FTLF1429P3BCVA?
The FTLF1429P3BCVA is a Finisar SFP+ transceiver for 16GFC LW (4/8/16GFC), A-revision ordering code at 14.025 Gb/s (16GFC). Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 16G Fibre Channel SAN switches and HBAs.
What is the maximum distance of the FTLF1429P3BCVA?
The FTLF1429P3BCVA is specified for up to 10km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF1429P3BCVA?
Per the Finisar family datasheet, the FTLF1429P3BCVA transmits −5.0 to +2.0 dBm @14.025G; −5.0 to −1.0 dBm @4.25/8.5G and has a receiver sensitivity of 0.063 / 0.042 / 0.029 mW OMA @14.025/8.5/4.25G. Maximum receiver input is +2.0 dBm.
Does the FTLF1429P3BCVA support DDM / digital diagnostics?
Yes. Digital diagnostics, 2-wire per SFP MSA / SFF-8472. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF1429P3BCVA use?
The FTLF1429P3BCVA works at 1310nm over SMF. Both ends of a link must use the same optical standard.
Will the FTLF1429P3BCVA work in my Cisco, Juniper, Arista or HPE switch?
The FTLF1429P3BCVA follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF1429P3BCVA vs FTLF1429P3BCV: what is the difference?
Both are in Finisar's FTLF1429 family. They differ in build / application (16GFC LW (4/8/16GFC), A-revision ordering code vs 16GFC LW (4/8/16GFC) 0-70C). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF1429P3BCVA rated for?
The FTLF1429P3BCVA is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLF1429P3BCVA part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLF1429P3BCVA genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLF1429P3BCVA price in India and how do I order?
The Finisar FTLF1429P3BCVA price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF1429P3BCVA need?
It runs from 3.3 V (3.15–3.45 V) with power dissipation of 1 W max with established link.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF1429P3BCV16GFC LW, 10kmFTLF1429P3BNV16GFC LW, 10kmFTLF1429P3BCE16GFC LW extended reach, 25kmFTLF8529P5BCV16GFC SW, 100m (OM3/OM4)FTLF8546P3BCV16GFC SW + 10GE SR-Lite dual-protocol, 100mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales