Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF1432P4PCV stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF1432P4PCV 32GFC LW SFP28 1310nm 10km
28.05 Gb/s (32GFC) 32GFC LW (8/16/32GFC) SFP28 transceiver, 1310nm, up to 10km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF1432P4PCV
- Family
- FTLF1432
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF1432P4PCV datasheet (PDF)
FTLF1432P4PCV specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF1432P4PCV |
| Product family | FTLF1432 |
| Form factor | SFP28 |
| Standards / application | FC-PI-6a; SFF-8472 Rev 12.1c; SFF-8432b; SFF-8431 Rev 4.1d |
| Data rate | 8.5 / 14.025 / 28.05 Gb/s Fibre Channel |
| Wavelength | 1295–1325 nm |
| Laser | 1310 nm DFB |
| Receiver | PIN |
| Reach | Up to 10 km on 9/125 µm SMF |
| Connector | Duplex LC |
| Tx output power | −5 to +2.0 dBm @28.05/14.025G; −8.4 to +2.0 dBm @8.5G |
| Rx sensitivity | −11.4 / −12.0 / −13.8 dBm OMA @28.05/14.025/8.5G |
| Rx overload / max input | +2 dBm |
| Extinction ratio | ≥ 4 dB @28.05G; ≥ 3.5 dB @8.5/14.025G |
| Supply voltage | 3.3 V (3.15–3.46 V) |
| Power dissipation | 1.5 W max with established link (440 mA typ) |
| Operating temperature | Commercial |
| Diagnostics | Digital diagnostics, 2-wire (temperature, Vcc, bias, Tx/Rx power) |
| Compliance | RoHS 2011/65/EU; Class 1 laser (FDA/CDRH, EN/IEC 60825) |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF1432P4PCV
The Finisar FTLF1432P4PCV (now a Coherent Corp. product, formerly II-VI) is a SFP28 32GFC LW (8/16/32GFC) optical transceiver for 28.05 Gb/s (32GFC) links at 1310nm over SMF, with reach up to 10km. It is a commercial-temperature part. It belongs to Finisar's FTLF1432 family, which has 7 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 32G Fibre Channel SAN switches and HBAs.
- Up to 28.05 Gb/s bi-directional data links
- Hot-pluggable SFP+ footprint
- Built-in digital diagnostic functions
- 1310nm DFB laser transmitter
- Duplex LC connector
- Up to 10 km on 9/125μm SMF
FTLF1432P4PCV: frequently asked questions
What is the Finisar FTLF1432P4PCV?
The FTLF1432P4PCV is a Finisar SFP28 transceiver for 32GFC LW (8/16/32GFC) at 28.05 Gb/s (32GFC). Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 32G Fibre Channel SAN switches and HBAs.
What is the maximum distance of the FTLF1432P4PCV?
The FTLF1432P4PCV is specified for up to 10km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF1432P4PCV?
Per the Finisar family datasheet, the FTLF1432P4PCV transmits −5 to +2.0 dBm @28.05/14.025G; −8.4 to +2.0 dBm @8.5G and has a receiver sensitivity of −11.4 / −12.0 / −13.8 dBm OMA @28.05/14.025/8.5G. Maximum receiver input is +2 dBm.
Does the FTLF1432P4PCV support DDM / digital diagnostics?
Yes. Digital diagnostics, 2-wire (temperature, Vcc, bias, Tx/Rx power). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF1432P4PCV use?
The FTLF1432P4PCV works at 1310nm over SMF. Both ends of a link must use the same optical standard.
Will the FTLF1432P4PCV work in my Cisco, Juniper, Arista or HPE switch?
The FTLF1432P4PCV follows the SFP28 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF1432P4PCV vs FTLF1432P3BCE: what is the difference?
Both are in Finisar's FTLF1432 family. They differ in reach (10km vs 25km). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF1432P4PCV rated for?
The FTLF1432P4PCV is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLF1432P4PCV part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLF1432P4PCV genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLF1432P4PCV price in India and how do I order?
The Finisar FTLF1432P4PCV price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF1432P4PCV need?
It runs from 3.3 V (3.15–3.46 V) with power dissipation of 1.5 W max with established link (440 mA typ).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF1432P3BCV32GFC LW, 10kmFTLF1432P3PCV32GFC LW, 10kmFTLF1432P3BCE32GFC LW, 25kmFTLF1432P4BCV32GFC LW, 10kmFTLF1432P4BCE32GFC LW, 25kmFTLF1432P4PCE32GFC LW, 25kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales