- Home
- Optical Transceivers
- Finisar (Coherent)
- 400G
- FTCD3312M2BCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCD3312M2BCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCD3312M2BCL 400G metro DCO Gen2 CFP2-DCO 600 km
400 Gb/s 400G metro DCO Gen2 CFP2-DCO transceiver, C-band DWDM tunable, up to 600 km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCD3312M2BCL
- Family
- FTCD3312
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCD3312M2BCL datasheet (PDF)
FTCD3312M2BCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCD3312M2BCL |
| Product family | FTCD3312 |
| Form factor | CFP2-DCO |
| Standards / application | CFP MSA CFP2 hardware spec; OIF CFP2-DCO IA; host 100GE/200GE/400GE/OTU4/OTUCn (FlexO) |
| Data rate | 400G/300G/200G/100G line (512 Gb/s M1; 481 Gb/s R1) |
| Wavelength | C-band tunable |
| Laser | C-band 5 THz DWDM tunable |
| Receiver | Coherent |
| Reach | 500 km (M1, page); 600 km (M2, brochure); 1000 km (R1, page) |
| Connector | LC, duplex SMF |
| Tx output power | −2 dBm (M1); −10 dBm (R1) |
| Operating temperature | Commercial |
| Diagnostics | MDIO (M1); page lists CMIS for R1 |
| Compliance | RoHS |
| Lifecycle | Ask for availability |
| Variant note | 400G CFP2-DCO Metro Gen. 2, 600 km (brochure) |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCD3312M2BCL
The Finisar FTCD3312M2BCL (now a Coherent Corp. product, formerly II-VI) is a CFP2-DCO 400G metro DCO Gen2 optical transceiver for 400 Gb/s links at C-band DWDM tunable over Duplex SMF, LC, with reach up to 600 km. It is a commercial-temperature part. It belongs to Finisar's FTCD3312 family, which has 4 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
- Multi-rate, SD-FEC
- Tunable DP-16QAM/8QAM/QPSK
- Multiplexes multiple 100G clients onto higher-rate line
FTCD3312M2BCL: frequently asked questions
What is the Finisar FTCD3312M2BCL?
The FTCD3312M2BCL is a Finisar CFP2-DCO transceiver for 400G metro DCO Gen2 at 400 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
What is the maximum distance of the FTCD3312M2BCL?
The FTCD3312M2BCL is specified for up to 600 km over Duplex SMF, LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCD3312M2BCL?
Per the Finisar family datasheet, the FTCD3312M2BCL transmits −2 dBm (M1); −10 dBm (R1).
Does the FTCD3312M2BCL support DDM / digital diagnostics?
Yes. MDIO (M1); page lists CMIS for R1. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCD3312M2BCL use?
The FTCD3312M2BCL works at C-band DWDM tunable over Duplex SMF, LC. Both ends of a link must use the same optical standard.
Will the FTCD3312M2BCL work in my Cisco, Juniper, Arista or HPE switch?
The FTCD3312M2BCL follows the CFP2-DCO MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCD3312M2BCL vs FTCD3312M1BCL: what is the difference?
Both are in Finisar's FTCD3312 family. They differ in reach (600 km vs 500 km); build / application (400G metro DCO Gen2 vs 400G metro DCO Gen1, -2 dBm, multi-rate). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCD3312M2BCL rated for?
The FTCD3312M2BCL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCD3312M2BCL part number mean?
The FTCD prefix marks Finisar's 400G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCD3312M2BCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCD3312M2BCL price in India and how do I order?
The Finisar FTCD3312M2BCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
Related Finisar parts
FTCD3312M1BCL400G metro DCO Gen1, -2 dBm, multi-rate, 500 kmFTCD3312O1BCL400G Open ROADM DCO, 600 kmFTCD3312R1BCL400G OpenZR+ DCO, -10 dBm, 600-1000 kmFTCD1314E1BCL400GBASE-LR8, 10 kmFTCD1324E1BCL400GBASE-FR8, 2 kmFTCD3313E1PCLOIF 400ZR, -10 dBm, 120 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales