- Home
- Optical Transceivers
- Finisar (Coherent)
- 400G
- FTCD4525E4PCM
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTCD4525E4PCM stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTCD4525E4PCM 400GBASE-DR4 OSFP 500 m
400 Gb/s 400GBASE-DR4 (Gen4) OSFP transceiver, 1310nm EML x4, up to 500 m, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTCD4525E4PCM
- Family
- FTCD4525
- Category
- Fiber optic transceiver modules
- Datasheet
- FTCD4525E4PCM datasheet (PDF)
FTCD4525E4PCM specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTCD4525E4PCM |
| Product family | FTCD4525 |
| Form factor | OSFP |
| Standards / application | IEEE 802.3bs 400GBASE-DR4; OSFP MSA |
| Data rate | 425 Gb/s (4x 53.125 GBd PAM4) |
| Wavelength | 1304.5–1317.5 nm |
| Laser | 4x EML (Class 1) |
| Receiver | PIN |
| Reach | 500 m on SMF |
| Connector | Parallel MPO-12 |
| Tx output power | −2.9 to 4 dBm per lane |
| Rx sensitivity | −4.4 dBm OMAouter per lane |
| Rx overload / max input | 5 dBm damage threshold |
| Extinction ratio | 3.5 dB min |
| Supply voltage | 3.3 V (3.135–3.465 V) |
| Power dissipation | < 12 W c-temp / < 10 W limited temp |
| Operating temperature | Commercial |
| Diagnostics | I2C management interface |
| Compliance | RoHS-6 |
| Lifecycle | Current production |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTCD4525E4PCM
The Finisar FTCD4525E4PCM (now a Coherent Corp. product, formerly II-VI) is a OSFP 400GBASE-DR4 (Gen4) optical transceiver for 400 Gb/s links at 1310nm EML x4 over Parallel SMF, MPO12, with reach up to 500 m. It is a commercial-temperature part. It belongs to Finisar's FTCD4525 family, which has 5 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
- Hot-pluggable OSFP form factor
- Supports 425Gb/s aggregate bit rate
- Power dissipation <10W (limited temp) or < 12W (c-temp)
- 4x100Gb/s PAM4 serial lanes
- Parallel MPO receptacle
FTCD4525E4PCM: frequently asked questions
What is the Finisar FTCD4525E4PCM?
The FTCD4525E4PCM is a Finisar OSFP transceiver for 400GBASE-DR4 (Gen4) at 400 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 400G data-centre spine, AI/ML clusters and 400ZR / ZR+ coherent DCI.
What is the maximum distance of the FTCD4525E4PCM?
The FTCD4525E4PCM is specified for up to 500 m over Parallel SMF, MPO12. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTCD4525E4PCM?
Per the Finisar family datasheet, the FTCD4525E4PCM transmits −2.9 to 4 dBm per lane and has a receiver sensitivity of −4.4 dBm OMAouter per lane. Maximum receiver input is 5 dBm damage threshold.
Does the FTCD4525E4PCM support DDM / digital diagnostics?
Yes. I2C management interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTCD4525E4PCM use?
The FTCD4525E4PCM works at 1310nm EML x4 over Parallel SMF, MPO12. Both ends of a link must use the same optical standard.
Will the FTCD4525E4PCM work in my Cisco, Juniper, Arista or HPE switch?
The FTCD4525E4PCM follows the OSFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTCD4525E4PCM vs FTCD4525E2PCM: what is the difference?
Both are in Finisar's FTCD4525 family. They differ in build / application (400GBASE-DR4 (Gen4) vs 400GBASE-DR4 (4x100G mode)). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTCD4525E4PCM rated for?
The FTCD4525E4PCM is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTCD4525E4PCM part number mean?
The FTCD prefix marks Finisar's 400G family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTCD4525E4PCM genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTCD4525E4PCM price in India and how do I order?
The Finisar FTCD4525E4PCM price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTCD4525E4PCM need?
It runs from 3.3 V (3.135–3.465 V) with power dissipation of < 12 W c-temp / < 10 W limited temp.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTCD4525E2PCM400GBASE-DR4, 500 mFTCD4525E2PLM400GBASE-DR4, 500 mFTCD4525E2PCM-4A400GBASE-DR4, 500 mFTCD4525E2PLM-4A400GBASE-DR4, 500 mFTCD4315E1PCL400GBASE-FR4, 2 kmFTCD4535E2PCM400G DR4+, 2 kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales