- Home
- Optical Transceivers
- Finisar (Coherent)
- 2G–4G
- FTLF1519P1BCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF1519P1BCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF1519P1BCL 1000BASE-ZX SFP 1550nm DFB 80-90km
up to 2.125 Gb/s 1000BASE-ZX / 2G-1G FC (2.125G) SFP transceiver, 1550nm DFB, up to 80-90km, commercial (−10 to 70 °c) temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF1519P1BCL
- Family
- FTLF1519P1
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF1519P1BCL datasheet (PDF)
FTLF1519P1BCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF1519P1BCL |
| Product family | FTLF1519P1 |
| Form factor | SFP |
| Standards / application | IEEE 802.3 Gigabit Ethernet; FC-PI 13.0 (1x/2x FC) |
| Data rate | 1.0625 / 1.25 / 2.125 Gb/s |
| Wavelength | 1540–1570 nm Tx; 1270–1600 nm Rx |
| Laser | Uncooled 1550 nm DFB |
| Receiver | PIN |
| Reach | Up to 80 km on 9/125 µm SMF (link table: 76 km @ 2x FC, 88 km @ GbE) |
| Connector | Duplex LC |
| Tx output power | 0 to +5 dBm |
| Rx sensitivity | −21 dBm @ 2.125 Gb/s; −22 dBm @ 1.25/1.06 Gb/s |
| Rx overload / max input | 0 dBm |
| Extinction ratio | 9 dB |
| Supply voltage | 3.15–3.60 V |
| Power dissipation | < 700 mW typ (200 typ / 300 max mA) |
| Operating temperature | Commercial (−10 to 70 °C) |
| Diagnostics | Digital diagnostics over the SFP MSA 2-wire serial bus (temp, bias, optical power, voltage, alarms) |
| Compliance | Class 1 laser (FDA/CDRH, EN 60825); RoHS 2011/65/EU, lead-free |
| Lifecycle | Current production |
| Variant note | B = narrow bail; C = −10 to 70 °C |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF1519P1BCL
The Finisar FTLF1519P1BCL (now a Coherent Corp. product, formerly II-VI) is a SFP 1000BASE-ZX / 2G-1G FC (2.125G) optical transceiver for up to 2.125 Gb/s links at 1550nm DFB over SMF, with reach up to 80-90km. It is a commercial-temperature part rated −10 to 70 °C. It belongs to Finisar's FTLF1519P1 family, which has 4 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
- Up to 2.125 Gb/s bi-directional data links
- Hot-pluggable SFP footprint
- Built-in digital diagnostic functions
- Uncooled 1550 nm DFB laser transmitter
- Duplex LC connector
- RoHS compliant and lead-free
FTLF1519P1BCL: frequently asked questions
What is the Finisar FTLF1519P1BCL?
The FTLF1519P1BCL is a Finisar SFP transceiver for 1000BASE-ZX / 2G-1G FC (2.125G) at up to 2.125 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
What is the maximum distance of the FTLF1519P1BCL?
The FTLF1519P1BCL is specified for up to 80-90km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF1519P1BCL?
Per the Finisar family datasheet, the FTLF1519P1BCL transmits 0 to +5 dBm and has a receiver sensitivity of −21 dBm @ 2.125 Gb/s; −22 dBm @ 1.25/1.06 Gb/s. Maximum receiver input is 0 dBm.
Does the FTLF1519P1BCL support DDM / digital diagnostics?
Yes. Digital diagnostics over the SFP MSA 2-wire serial bus (temp, bias, optical power, voltage, alarms). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF1519P1BCL use?
The FTLF1519P1BCL works at 1550nm DFB over SMF. Both ends of a link must use the same optical standard.
Will the FTLF1519P1BCL work in my Cisco, Juniper, Arista or HPE switch?
The FTLF1519P1BCL follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF1519P1BCL vs FTLF1519P1BNL: what is the difference?
Both are in Finisar's FTLF1519P1 family. They differ in temperature grade (commercial vs extended). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF1519P1BCL rated for?
The FTLF1519P1BCL is a commercial-temperature part rated −10 to 70 °C. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLF1519P1BCL part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLF1519P1BCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLF1519P1BCL price in India and how do I order?
The Finisar FTLF1519P1BCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF1519P1BCL need?
It runs from 3.15–3.60 V with power dissipation of < 700 mW typ (200 typ / 300 max mA).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF1519P1BNL1000BASE-ZX / 2G-1G FC, 80-90kmFTLF1519P1WCL1000BASE-ZX / 2G-1G FC, 80-90kmFTLF1519P1WNL1000BASE-ZX / 2G-1G FC, 80-90kmFTLF1619P1BCL1000BASE-EZX / 2G-1G FC, 110-115kmFTLF1521P1BCLOC-48 IR-2 / STM S-16.2 multirate, 15km / 40km classFTLF1621P1BCLOC-48 LR-2 / STM L-16.2 multirate, 80kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales