- Home
- Optical Transceivers
- Finisar (Coherent)
- 2G–4G
- FTLF8524P2BNL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF8524P2BNL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF8524P2BNL 4G/2G/1G FC SFP 850nm 150m
up to 4.25 Gb/s 4G/2G/1G FC SFP transceiver, 850nm, up to 150m (OM2 @4G) / up to 550m lower rates, extended (−10 to 85 °c) temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF8524P2BNL
- Family
- FTLF8524P2
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF8524P2BNL datasheet (PDF)
FTLF8524P2BNL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF8524P2BNL |
| Product family | FTLF8524P2 |
| Form factor | SFP |
| Standards / application | FC-PI-2 Rev 7.0 (1x/2x/4x FC); IEEE 802.3 1000BASE-SX (rate-selectable versions) |
| Data rate | 1.0625 / 2.125 / 4.25 Gb/s FC; 1.25 Gb/s GbE (V versions) |
| Wavelength | 830–860 nm |
| Laser | 850 nm oxide VCSEL |
| Reach | 50/125 µm MMF: 550 m @ 1.0625, 300 m @ 2.125, 150 m @ 4.25 Gb/s; 62.5/125 µm MMF: 300 m / 150 m / 70 m |
| Connector | Duplex LC |
| Tx output power | −9 to −2.5 dBm |
| Rx sensitivity | −20 dBm @ 1.0625/1.25 Gb/s; −18 dBm @ 2.125 Gb/s; −15 dBm @ 4.25 Gb/s |
| Rx overload / max input | 0 dBm |
| Extinction ratio | 9 dB (low-bandwidth mode) |
| Supply voltage | 3.3 V (3.0–3.6 V) |
| Power dissipation | Supply current 180 typ / 240 max mA |
| Operating temperature | Extended (−10 to 85 °C) |
| Diagnostics | Digital diagnostics per SFP MSA over 2-wire serial (temp, bias, Tx/Rx power, voltage, alarms/warnings) |
| Compliance | Class 1 laser product (FDA/CDRH, EN/IEC 60825); RoHS 2002/95/EC, lead-free |
| Lifecycle | Current production |
| Variant note | B = narrow bail; L = non rate-selectable (1x/2x/4x FC) |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF8524P2BNL
The Finisar FTLF8524P2BNL (now a Coherent Corp. product, formerly II-VI) is a SFP 4G/2G/1G FC optical transceiver for up to 4.25 Gb/s links at 850nm over MMF, with reach up to 150m (OM2 @4G) / up to 550m lower rates. It is an extended-temperature part rated −10 to 85 °C. It belongs to Finisar's FTLF8524P2 family, which has 4 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
- Up to 4.25 Gb/s bi-directional data links
- Hot-pluggable SFP footprint
- Built-in digital diagnostic functions
- Metal enclosure, for lower EMI
- Single 3.3 V power supply
- Extended operating temperature range: −20 °C to 85 °C
FTLF8524P2BNL: frequently asked questions
What is the Finisar FTLF8524P2BNL?
The FTLF8524P2BNL is a Finisar SFP transceiver for 4G/2G/1G FC at up to 4.25 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
What is the maximum distance of the FTLF8524P2BNL?
The FTLF8524P2BNL is specified for up to 150m (OM2 @4G) / up to 550m lower rates over MMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF8524P2BNL?
Per the Finisar family datasheet, the FTLF8524P2BNL transmits −9 to −2.5 dBm and has a receiver sensitivity of −20 dBm @ 1.0625/1.25 Gb/s; −18 dBm @ 2.125 Gb/s; −15 dBm @ 4.25 Gb/s. Maximum receiver input is 0 dBm.
Does the FTLF8524P2BNL support DDM / digital diagnostics?
Yes. Digital diagnostics per SFP MSA over 2-wire serial (temp, bias, Tx/Rx power, voltage, alarms/warnings). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF8524P2BNL use?
The FTLF8524P2BNL works at 850nm over MMF. Both ends of a link must use the same optical standard.
Will the FTLF8524P2BNL work in my Cisco, Juniper, Arista or HPE switch?
The FTLF8524P2BNL follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF8524P2BNL vs FTLF8524P2BNV: what is the difference?
Both are in Finisar's FTLF8524P2 family. They differ in build / application (4G/2G/1G FC vs 4G/2G/1G FC + GbE (rate select)). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF8524P2BNL rated for?
The FTLF8524P2BNL is an extended-temperature part rated −10 to 85 °C (per Finisar's part-number temperature code). Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLF8524P2BNL part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLF8524P2BNL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLF8524P2BNL price in India and how do I order?
The Finisar FTLF8524P2BNL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF8524P2BNL need?
It runs from 3.3 V (3.0–3.6 V) with power dissipation of Supply current 180 typ / 240 max mA.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF8524P2BNV4G/2G/1G FC + GbE, 150m (OM2 @4G) / up to 550m lower ratesFTLF8524P2WNL4G/2G/1G FC, 150m (OM2 @4G) / up to 550m lower ratesFTLF8524P2WNV4G/2G/1G FC + GbE, 150m (OM2 @4G) / up to 550m lower ratesFTLF8519P3BNL1000BASE-SX / 1G-2G FC, 550mFTLF8524P3BNL4GFC / 3.7G wireless, 300mFTLF8519P2BCL1000BASE-SX / 1G-2G FC, 550mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales