Next Gen Networks

FTLF8524E2GNL

Finisar FTLF8524E2GNL 4G/2G/1G FC SFF 2x7 850nm 150m @4G | Next Gen Networks
Genuine OEM optics · Bulk supply · GST invoice · Pan-India dispatchWhatsApp +91-7827955775 · Sales@nextgennetworks.in
  1. Home
  2. Optical Transceivers
  3. Finisar (Coherent)
  4. 2G–4G
  5. FTLF8524E2GNL
2G-4G SFF 2X7 OPTICAL TRANSCEIVERCURRENT PRODUCTION

Finisar FTLF8524E2GNL 4G/2G/1G FC SFF 2x7 850nm 150m @4G

up to 4.25 Gb/s 4G/2G/1G FC SFF 2x7 transceiver, 850nm, up to 150m @4G (550m lower rates), extended (−10 to 85 °c) temperature.

Manufacturer
Coherent Corp. (formerly Finisar / II-VI)
Mfr part number
FTLF8524E2GNL
Family
FTLF8524E2
Category
Fiber optic transceiver modules
Datasheet
FTLF8524E2GNL datasheet (PDF)
up to 4.25 Gb/s850nm150m @4G (550m lowSFF 2x7Extended tempBoard-mount

FTLF8524E2GNL specifications

AttributeValue
ManufacturerCoherent Corp. (Finisar)
Manufacturer part numberFTLF8524E2GNL
Product familyFTLF8524E2
Form factorSFF 2x7
Standards / applicationFC-PI-2 Rev 10.02
Data rate1.0625 / 2.125 / 4.25 Gb/s FC (tri-rate)
Wavelength830–860 nm
Laser850 nm oxide VCSEL
ReceiverPIN (Coherent product page)
Reach50/125 µm MMF: 500 m @ 1.0625, 300 m @ 2.125, 150 m @ 4.25 Gb/s; 62.5/125 µm MMF: 300 m / 150 m / 70 m
ConnectorDuplex LC
Tx output power−9 to −2.5 dBm
Rx sensitivity−20 dBm @ 1.0625 Gb/s; −18 dBm @ 2.125 Gb/s; −15 dBm @ 4.25 Gb/s
Rx overload / max input0 dBm
Extinction ratio9 dB
Supply voltage3.3 V (3.0–3.6 V)
Power dissipationSupply current 180 typ / 240 max mA
Operating temperatureExtended (−10 to 85 °C)
DiagnosticsDigital diagnostics over 2-wire serial (temp, bias, optical power, voltage)
ComplianceClass 1 laser product (EN/IEC 60825, EN/IEC 60950); RoHS 2002/95/EC
LifecycleCurrent production
Variant noteG = 2 grounding pins, short EMI shield; L = non rate-selectable

Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.

About the Finisar FTLF8524E2GNL

The Finisar FTLF8524E2GNL (now a Coherent Corp. product, formerly II-VI) is a SFF 2x7 4G/2G/1G FC optical transceiver for up to 4.25 Gb/s links at 850nm over MMF, with reach up to 150m @4G (550m lower rates). It is an extended-temperature part rated −10 to 85 °C. It belongs to Finisar's FTLF8524E2 family, which has 4 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.

  • 2x7 pin SFF-like footprint
  • Built-in digital diagnostic functions
  • Metal enclosure, for lower EMI
  • Single 3.3 V power supply

FTLF8524E2GNL: frequently asked questions

What is the Finisar FTLF8524E2GNL?

The FTLF8524E2GNL is a Finisar SFF 2x7 transceiver for 4G/2G/1G FC at up to 4.25 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.

What is the maximum distance of the FTLF8524E2GNL?

The FTLF8524E2GNL is specified for up to 150m @4G (550m lower rates) over MMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.

What is the optical power budget of the FTLF8524E2GNL?

Per the Finisar family datasheet, the FTLF8524E2GNL transmits −9 to −2.5 dBm and has a receiver sensitivity of −20 dBm @ 1.0625 Gb/s; −18 dBm @ 2.125 Gb/s; −15 dBm @ 4.25 Gb/s. Maximum receiver input is 0 dBm.

Does the FTLF8524E2GNL support DDM / digital diagnostics?

Yes. Digital diagnostics over 2-wire serial (temp, bias, optical power, voltage). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.

Which fiber and connector does the FTLF8524E2GNL use?

The FTLF8524E2GNL works at 850nm over MMF. Both ends of a link must use the same optical standard.

Will the FTLF8524E2GNL work in my Cisco, Juniper, Arista or HPE switch?

The FTLF8524E2GNL follows the SFF 2x7 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.

FTLF8524E2GNL vs FTLF8524E2GNV: what is the difference?

Both are in Finisar's FTLF8524E2 family. They differ in build / application (4G/2G/1G FC vs 4G/2G/1G FC + GbE (rate select)). Pick the variant that matches your temperature, latch and wavelength needs.

What temperature range is the FTLF8524E2GNL rated for?

The FTLF8524E2GNL is an extended-temperature part rated −10 to 85 °C. Choose an industrial (T) variant for outdoor or uncontrolled sites.

What does the FTLF8524E2GNL part number mean?

The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.

Is your FTLF8524E2GNL genuine Finisar?

Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.

What is the FTLF8524E2GNL price in India and how do I order?

The Finisar FTLF8524E2GNL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.

What power does the FTLF8524E2GNL need?

It runs from 3.3 V (3.0–3.6 V) with power dissipation of Supply current 180 typ / 240 max mA.

Next Gen Networks · WeWork Eldeco Centre, VO-130, Block A, Shivalik Colony, New Delhi 110017Finisar is a trademark of Coherent Corp. Next Gen Networks is an independent supplier.

Need pricing or stock for this model?
Our team replies within 1 business day.