Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF8529P4PCV stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF8529P4PCV 16GFC SW SFP+ 850nm 100m
14.025 Gb/s (16GFC) 16GFC SW (4/8/16GFC) 0-70C SFP+ transceiver, 850nm, up to 100m (OM3/OM4), commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF8529P4PCV
- Family
- FTLF8529
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF8529P4PCV datasheet (PDF)
FTLF8529P4PCV specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF8529P4PCV |
| Product family | FTLF8529 |
| Form factor | SFP+ |
| Standards / application | FC-PI-5 Rev 6.00a; SFF-8472 Rev 11.0c; SFF-8081h |
| Data rate | 4.25 / 8.5 / 14.025 Gb/s Fibre Channel (tri-rate) |
| Wavelength | 840–860 nm |
| Laser | 850 nm oxide VCSEL |
| Receiver | PIN |
| Reach | OM3: 380 m @4.25G, 150 m @8.5G, 100 m @14.025G; OM2: 150/50/35 m |
| Connector | Duplex LC |
| Tx output power | −7.8 dBm avg (single value stated); OMA ≥ −6.1/−5.2/−4.8 dBm @4.25/8.5/14.025G |
| Rx sensitivity | −12.1 / −11.2 / −10.5 dBm OMA @4.25/8.5/14.025G |
| Rx overload / max input | 0 dBm max |
| Supply voltage | 3.3 V (3.15–3.46 V) |
| Power dissipation | 290 mA supply current (power not stated) |
| Operating temperature | Commercial |
| Diagnostics | SFF-8472 digital diagnostics, 2-wire at A2h |
| Compliance | RoHS; Class 1 laser (FDA/CDRH) |
| Lifecycle | Ask for availability |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF8529P4PCV
The Finisar FTLF8529P4PCV (now a Coherent Corp. product, formerly II-VI) is a SFP+ 16GFC SW (4/8/16GFC) 0-70C optical transceiver for 14.025 Gb/s (16GFC) links at 850nm over MMF, with reach up to 100m (OM3/OM4). It is a commercial-temperature part. It belongs to Finisar's FTLF8529 family, which has 9 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 16G Fibre Channel SAN switches and HBAs.
- Up to 14.025 Gb/s bi-directional data links
- Hot-pluggable SFP+ footprint
- Built-in digital diagnostic functions
- 850nm Oxide VCSEL laser transmitter
- Duplex LC connector
- Metal enclosure, for lower EMI
FTLF8529P4PCV: frequently asked questions
What is the Finisar FTLF8529P4PCV?
The FTLF8529P4PCV is a Finisar SFP+ transceiver for 16GFC SW (4/8/16GFC) 0-70C at 14.025 Gb/s (16GFC). Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 16G Fibre Channel SAN switches and HBAs.
What is the maximum distance of the FTLF8529P4PCV?
The FTLF8529P4PCV is specified for up to 100m (OM3/OM4) over MMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF8529P4PCV?
Per the Finisar family datasheet, the FTLF8529P4PCV transmits −7.8 dBm avg (single value stated); OMA ≥ −6.1/−5.2/−4.8 dBm @4.25/8.5/14.025G and has a receiver sensitivity of −12.1 / −11.2 / −10.5 dBm OMA @4.25/8.5/14.025G. Maximum receiver input is 0 dBm max.
Does the FTLF8529P4PCV support DDM / digital diagnostics?
Yes. SFF-8472 digital diagnostics, 2-wire at A2h. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF8529P4PCV use?
The FTLF8529P4PCV works at 850nm over MMF. Both ends of a link must use the same optical standard.
Will the FTLF8529P4PCV work in my Cisco, Juniper, Arista or HPE switch?
The FTLF8529P4PCV follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF8529P4PCV vs FTLF8529P3BNV: what is the difference?
Both are in Finisar's FTLF8529 family. They differ in temperature grade (commercial vs extended); build / application (16GFC SW (4/8/16GFC) 0-70C vs 16GFC SW (4/8/16GFC) 0-85C). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF8529P4PCV rated for?
The FTLF8529P4PCV is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLF8529P4PCV part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLF8529P4PCV genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLF8529P4PCV price in India and how do I order?
The Finisar FTLF8529P4PCV price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF8529P4PCV need?
It runs from 3.3 V (3.15–3.46 V) with power dissipation of 290 mA supply current (power not stated).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF8529P3BCV16GFC SW, 100m (OM3/OM4)FTLF8529P3BNV16GFC SW, 100m (OM3/OM4)FTLF8529P4BCV16GFC SW, 100m (OM3/OM4)FTLF8529P4BNV16GFC SW, 100m (OM3/OM4)FTLF8529P5BCV16GFC SW, 100m (OM3/OM4)FTLF8529P5BNV16GFC SW, 100m (OM3/OM4)Government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales