- Home
- Optical Transceivers
- Finisar (Coherent)
- 25G
- FTLF8536P5BCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF8536P5BCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF8536P5BCL 25GBASE-SR/10G SFP28 850nm 100m
25 Gb/s 25GBASE-SR/10G SR-Lite/eCPRI (25GbE only, bail) SFP28 transceiver, 850nm, up to 100m (OM4), commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF8536P5BCL
- Family
- FTLF8536P5
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF8536P5BCL datasheet (PDF)
FTLF8536P5BCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF8536P5BCL |
| Product family | FTLF8536P5 |
| Form factor | SFP28 |
| Standards / application | IEEE 802.3by; SFF-8472 Rev 12.2; SFF-8402g; SFF-8432a; SFF-8431 Rev 4.1c |
| Data rate | 25.78 Gb/s; 10.3 Gb/s on V (dual-rate) versions |
| Wavelength | 840–860 nm |
| Laser | 850 nm oxide VCSEL |
| Receiver | PIN |
| Reach | 100 m OM4; 70 m OM3 |
| Connector | Duplex LC |
| Tx output power | −8.4 to +2.4 dBm avg; OMA ≥ −6.4 dBm |
| Rx sensitivity | −5.2 dBm @25.78G |
| Rx overload / max input | +2.4 dBm (avg receive range −10.3 to +2.4 dBm) |
| Extinction ratio | ≥ 2 dB |
| Supply voltage | 3.3 V (3.15–3.46 V) |
| Power dissipation | 1 W max (290 mA) |
| Operating temperature | Commercial |
| Diagnostics | SFF-8472 digital diagnostics, 2-wire |
| Compliance | RoHS; Class 1 laser per IEC 60825-1 |
| Lifecycle | Current production |
| Variant note | Bail, 0–70 °C, 25GbE only |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF8536P5BCL
The Finisar FTLF8536P5BCL (now a Coherent Corp. product, formerly II-VI) is a SFP28 25GBASE-SR/10G SR-Lite/eCPRI (25GbE only, bail) optical transceiver for 25 Gb/s links at 850nm over MMF, with reach up to 100m (OM4). It is a commercial-temperature part. It belongs to Finisar's FTLF8536P5 family, which has 8 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 25G Ethernet server and leaf links, 5G fronthaul (eCPRI) and 10G-to-25G upgrades.
- Up to 25.78 Gb/s bi-directional data links
- Hot-pluggable SFP+ footprint
- Built-in digital diagnostic functions
- 850nm Oxide VCSEL laser transmitter
- 1W maximum power consumption
- Single 3.3V power supply
FTLF8536P5BCL: frequently asked questions
What is the Finisar FTLF8536P5BCL?
The FTLF8536P5BCL is a Finisar SFP28 transceiver for 25GBASE-SR/10G SR-Lite/eCPRI (25GbE only, bail) at 25 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 25G Ethernet server and leaf links, 5G fronthaul (eCPRI) and 10G-to-25G upgrades.
What is the maximum distance of the FTLF8536P5BCL?
The FTLF8536P5BCL is specified for up to 100m (OM4) over MMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF8536P5BCL?
Per the Finisar family datasheet, the FTLF8536P5BCL transmits −8.4 to +2.4 dBm avg; OMA ≥ −6.4 dBm and has a receiver sensitivity of −5.2 dBm @25.78G. Maximum receiver input is +2.4 dBm (avg receive range −10.3 to +2.4 dBm).
Does the FTLF8536P5BCL support DDM / digital diagnostics?
Yes. SFF-8472 digital diagnostics, 2-wire. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF8536P5BCL use?
The FTLF8536P5BCL works at 850nm over MMF. Both ends of a link must use the same optical standard.
Will the FTLF8536P5BCL work in my Cisco, Juniper, Arista or HPE switch?
The FTLF8536P5BCL follows the SFP28 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF8536P5BCL vs FTLF8536P5BCV: what is the difference?
Both are in Finisar's FTLF8536P5 family. They differ in build / application (25GBASE-SR/10G SR-Lite/eCPRI (25GbE only, bail) vs 25GBASE-SR/10G SR-Lite/eCPRI (25GbE+10GbE, bail)). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF8536P5BCL rated for?
The FTLF8536P5BCL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLF8536P5BCL part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLF8536P5BCL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLF8536P5BCL price in India and how do I order?
The Finisar FTLF8536P5BCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF8536P5BCL need?
It runs from 3.3 V (3.15–3.46 V) with power dissipation of 1 W max (290 mA).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF8536P5BCV25GBASE-SR/10G SR-Lite/eCPRI, 100m (OM4)FTLF8536P5BNL25GBASE-SR/10G SR-Lite/eCPRI, 100m (OM4)FTLF8536P5BNV25GBASE-SR/10G SR-Lite/eCPRI, 100m (OM4)FTLF8536P5PCL25GBASE-SR/10G SR-Lite/eCPRI, 100m (OM4)FTLF8536P5PCV25GBASE-SR/10G SR-Lite/eCPRI, 100m (OM4)FTLF8536P5PNL25GBASE-SR/10G SR-Lite/eCPRI, 100m (OM4)Government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales