- Home
- Optical Transceivers
- Finisar (Coherent)
- 2G–4G
- FTLF1721P2WTL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF1721P2WTL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF1721P2WTL OC-48 LR-1 SFP 40km
up to 2.67 Gb/s OC-48 LR-1 / STM L-16.1 multirate (2.67G) SFP transceiver, 1310nm DFB + APD, up to 40km, industrial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF1721P2WTL
- Family
- FTLF1721P2
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF1721P2WTL datasheet (PDF)
FTLF1721P2WTL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF1721P2WTL |
| Product family | FTLF1721P2 |
| Form factor | SFP |
| Standards / application | SONET OC-48 LR-1 / SDH STM L-16.1; Gigabit Ethernet (IEEE 802.3); Fibre Channel FC-PI-2 Rev 7.04 |
| Data rate | Up to 2.67 Gb/s |
| Wavelength | 1310nm DFB + APD |
| Laser | Uncooled 1310 nm DFB |
| Receiver | APD |
| Reach | 40km |
| Supply voltage | 3.3 V |
| Power dissipation | <700 mW typical |
| Operating temperature | Industrial |
| Diagnostics | Built-in digital diagnostic functions |
| Compliance | RoHS (2002/95/EC) |
| Lifecycle | Legacy / end-of-life |
| Variant note | Wide extraction bail; −40 to 85 °C |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF1721P2WTL
The Finisar FTLF1721P2WTL (now a Coherent Corp. product, formerly II-VI) is a SFP OC-48 LR-1 / STM L-16.1 multirate (2.67G) optical transceiver for up to 2.67 Gb/s links at 1310nm DFB + APD over SMF, with reach up to 40km. It is an industrial-temperature part. It belongs to Finisar's FTLF1721P2 family, which has 4 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. This is a legacy Finisar part; we help buyers find remaining stock or a current Coherent alternative. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
- Up to 2.67Gb/s bi-directional data links
- Hot-pluggable SFP footprint
- Built-in digital diagnostic functions
- Uncooled 1310nm DFB laser transmitter
- APD receiver
FTLF1721P2WTL: frequently asked questions
What is the Finisar FTLF1721P2WTL?
The FTLF1721P2WTL is a Finisar SFP transceiver for OC-48 LR-1 / STM L-16.1 multirate (2.67G) at up to 2.67 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
What is the maximum distance of the FTLF1721P2WTL?
The FTLF1721P2WTL is specified for up to 40km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTLF1721P2WTL use?
The FTLF1721P2WTL works at 1310nm DFB + APD over SMF. Both ends of a link must use the same optical standard.
Does the FTLF1721P2WTL support DDM / digital diagnostics?
Yes. Built-in digital diagnostic functions. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Will the FTLF1721P2WTL work in my Cisco, Juniper, Arista or HPE switch?
The FTLF1721P2WTL follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF1721P2WTL vs FTLF1721P2BCL: what is the difference?
Both are in Finisar's FTLF1721P2 family. They differ in temperature grade (industrial vs commercial). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF1721P2WTL rated for?
The FTLF1721P2WTL is an industrial-temperature part. Industrial grade suits outdoor cabinets, telecom huts and plant floors.
What does the FTLF1721P2WTL part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.
Is the FTLF1721P2WTL still available?
The FTLF1721P2WTL is a legacy Finisar part, so new production is limited or ended. Next Gen Networks helps source remaining genuine stock and can suggest a current Coherent alternative with the same reach and wavelength.
What is the FTLF1721P2WTL price in India and how do I order?
The Finisar FTLF1721P2WTL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF1721P2WTL need?
It runs from 3.3 V with power dissipation of <700 mW typical.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF1721P2BCLOC-48 LR-1 / STM L-16.1 multirate, 40kmFTLF1721P2BTLOC-48 LR-1 / STM L-16.1 multirate, 40kmFTLF1721P2WCLOC-48 LR-1 / STM L-16.1 multirate, 40kmFTLF1419P1BCL1000BASE-EX / 2G-1G FC, 55kmFTLF1321P1BTLOC-48 SR / STM I-16 multirate, 2kmFTLF1421P1BCLOC-48 IR-1 / STM S-16.1 multirate, 15kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales