Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF8529P5BNV stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF8529P5BNV 16GFC SW SFP+ 850nm 100m
14.025 Gb/s (16GFC) 16GFC SW (4/8/16GFC) 0-85C SFP+ transceiver, 850nm, up to 100m (OM3/OM4), extended temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF8529P5BNV
- Family
- FTLF8529
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF8529P5BNV datasheet (PDF)
FTLF8529P5BNV specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF8529P5BNV |
| Product family | FTLF8529 |
| Form factor | SFP+ |
| Standards / application | FC-PI-5 Rev 6.00a; SFF-8472 Rev 11.0c; SFF-8081h |
| Data rate | 4.25 / 8.5 / 14.025 Gb/s Fibre Channel (tri-rate) |
| Wavelength | 840–860 nm |
| Laser | 850 nm oxide VCSEL |
| Receiver | PIN |
| Reach | OM3: 380 m @4.25G, 150 m @8.5G, 100 m @14.025G; OM2: 150/50/35 m |
| Connector | Duplex LC |
| Tx output power | −7.8 dBm avg (single value stated); OMA ≥ −6.1/−5.2/−4.8 dBm @4.25/8.5/14.025G |
| Rx sensitivity | −12.1 / −11.2 / −10.5 dBm OMA @4.25/8.5/14.025G |
| Rx overload / max input | 0 dBm max |
| Supply voltage | 3.3 V (3.15–3.46 V) |
| Power dissipation | 290 mA supply current (power not stated) |
| Operating temperature | Extended |
| Diagnostics | SFF-8472 digital diagnostics, 2-wire at A2h |
| Compliance | RoHS; Class 1 laser (FDA/CDRH) |
| Lifecycle | Current production |
| Variant note | Bail latch, 0–85 °C |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF8529P5BNV
The Finisar FTLF8529P5BNV (now a Coherent Corp. product, formerly II-VI) is a SFP+ 16GFC SW (4/8/16GFC) 0-85C optical transceiver for 14.025 Gb/s (16GFC) links at 850nm over MMF, with reach up to 100m (OM3/OM4). It is an extended-temperature part. It belongs to Finisar's FTLF8529 family, which has 9 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 16G Fibre Channel SAN switches and HBAs.
- Up to 14.025 Gb/s bi-directional data links
- Hot-pluggable SFP+ footprint
- Built-in digital diagnostic functions
- 850nm Oxide VCSEL laser transmitter
- Duplex LC connector
- Metal enclosure, for lower EMI
FTLF8529P5BNV: frequently asked questions
What is the Finisar FTLF8529P5BNV?
The FTLF8529P5BNV is a Finisar SFP+ transceiver for 16GFC SW (4/8/16GFC) 0-85C at 14.025 Gb/s (16GFC). Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 16G Fibre Channel SAN switches and HBAs.
What is the maximum distance of the FTLF8529P5BNV?
The FTLF8529P5BNV is specified for up to 100m (OM3/OM4) over MMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF8529P5BNV?
Per the Finisar family datasheet, the FTLF8529P5BNV transmits −7.8 dBm avg (single value stated); OMA ≥ −6.1/−5.2/−4.8 dBm @4.25/8.5/14.025G and has a receiver sensitivity of −12.1 / −11.2 / −10.5 dBm OMA @4.25/8.5/14.025G. Maximum receiver input is 0 dBm max.
Does the FTLF8529P5BNV support DDM / digital diagnostics?
Yes. SFF-8472 digital diagnostics, 2-wire at A2h. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF8529P5BNV use?
The FTLF8529P5BNV works at 850nm over MMF. Both ends of a link must use the same optical standard.
Will the FTLF8529P5BNV work in my Cisco, Juniper, Arista or HPE switch?
The FTLF8529P5BNV follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF8529P5BNV vs FTLF8529P3BCV: what is the difference?
Both are in Finisar's FTLF8529 family. They differ in temperature grade (extended vs commercial); build / application (16GFC SW (4/8/16GFC) 0-85C vs 16GFC SW (4/8/16GFC) 0-70C). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF8529P5BNV rated for?
The FTLF8529P5BNV is an extended-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLF8529P5BNV part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLF8529P5BNV genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLF8529P5BNV price in India and how do I order?
The Finisar FTLF8529P5BNV price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF8529P5BNV need?
It runs from 3.3 V (3.15–3.46 V) with power dissipation of 290 mA supply current (power not stated).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF8529P3BCV16GFC SW, 100m (OM3/OM4)FTLF8529P3BNV16GFC SW, 100m (OM3/OM4)FTLF8529P4BCV16GFC SW, 100m (OM3/OM4)FTLF8529P4BNV16GFC SW, 100m (OM3/OM4)FTLF8529P4PCV16GFC SW, 100m (OM3/OM4)FTLF8529P5BCV16GFC SW, 100m (OM3/OM4)Government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales