Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLF8532P5PNV stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLF8532P5PNV 32GFC SW SFP28 850nm 100m
28.05 Gb/s (32GFC) 32GFC SW (8/16/32GFC) 0-85C pull-tab SFP28 transceiver, 850nm, up to 100m (OM4), extended temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLF8532P5PNV
- Family
- FTLF8532
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLF8532P5PNV datasheet (PDF)
FTLF8532P5PNV specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLF8532P5PNV |
| Product family | FTLF8532 |
| Form factor | SFP28 |
| Standards / application | FC-PI-6a; SFF-8472 Rev 12.2c; SFF-8432b; SFF-8431 Rev 4.1d |
| Data rate | 8.5 / 14.025 / 28.05 Gb/s Fibre Channel (tri-rate) |
| Wavelength | 840–860 nm |
| Laser | 850 nm oxide VCSEL |
| Receiver | PIN |
| Reach | @28.05G: 100 m OM4, 70 m OM3, 20 m OM2; @14.025G: 125/100/35 m; @8.5G: 190/150/50 m |
| Connector | Duplex LC |
| Tx output power | −6.7 to +2.0 dBm @28.05G; −7.8 to +2.0 dBm @14.025G; −8.2 to +2.0 dBm @8.5G |
| Rx sensitivity | −10.2 / −10.5 / −11.2 dBm OMA @28.05/14.025/8.5G |
| Rx overload / max input | +2 dBm |
| Supply voltage | 3.3 V (3.15–3.46 V) |
| Power dissipation | 290 mA typ (P4); 1.2 W max (P5, Mouser) |
| Operating temperature | Extended |
| Diagnostics | SFF-8472 digital diagnostics (temperature, bias, Tx/Rx power, Vcc) |
| Compliance | RoHS 2011/65/EU; Class 1 laser (FDA, EN/IEC 60825) |
| Lifecycle | Current production |
| Variant note | Pull tab, 0–85 °C (Mouser) |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLF8532P5PNV
The Finisar FTLF8532P5PNV (now a Coherent Corp. product, formerly II-VI) is a SFP28 32GFC SW (8/16/32GFC) 0-85C pull-tab optical transceiver for 28.05 Gb/s (32GFC) links at 850nm over MMF, with reach up to 100m (OM4). It is an extended-temperature part. It belongs to Finisar's FTLF8532 family, which has 7 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 32G Fibre Channel SAN switches and HBAs.
- Up to 28.05 Gb/s bi-directional data links
- Hot-pluggable SFP+ footprint
- Built-in digital diagnostic functions
- 850nm Oxide VCSEL laser transmitter
- Duplex LC connector
- Metal enclosure, for lower EMI
FTLF8532P5PNV: frequently asked questions
What is the Finisar FTLF8532P5PNV?
The FTLF8532P5PNV is a Finisar SFP28 transceiver for 32GFC SW (8/16/32GFC) 0-85C pull-tab at 28.05 Gb/s (32GFC). Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 32G Fibre Channel SAN switches and HBAs.
What is the maximum distance of the FTLF8532P5PNV?
The FTLF8532P5PNV is specified for up to 100m (OM4) over MMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLF8532P5PNV?
Per the Finisar family datasheet, the FTLF8532P5PNV transmits −6.7 to +2.0 dBm @28.05G; −7.8 to +2.0 dBm @14.025G; −8.2 to +2.0 dBm @8.5G and has a receiver sensitivity of −10.2 / −10.5 / −11.2 dBm OMA @28.05/14.025/8.5G. Maximum receiver input is +2 dBm.
Does the FTLF8532P5PNV support DDM / digital diagnostics?
Yes. SFF-8472 digital diagnostics (temperature, bias, Tx/Rx power, Vcc). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLF8532P5PNV use?
The FTLF8532P5PNV works at 850nm over MMF. Both ends of a link must use the same optical standard.
Will the FTLF8532P5PNV work in my Cisco, Juniper, Arista or HPE switch?
The FTLF8532P5PNV follows the SFP28 MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLF8532P5PNV vs FTLF8532P4BCV: what is the difference?
Both are in Finisar's FTLF8532 family. They differ in temperature grade (extended vs commercial); build / application (32GFC SW (8/16/32GFC) 0-85C pull-tab vs 32GFC SW (8/16/32GFC) 0-70C). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLF8532P5PNV rated for?
The FTLF8532P5PNV is an extended-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLF8532P5PNV part number mean?
The FTLF prefix marks Finisar's SFP / SFP28 / SFP56 family (incl. Fibre Channel). The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLF8532P5PNV genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLF8532P5PNV price in India and how do I order?
The Finisar FTLF8532P5PNV price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLF8532P5PNV need?
It runs from 3.3 V (3.15–3.46 V) with power dissipation of 290 mA typ (P4); 1.2 W max (P5, Mouser).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLF8532P4BCV32GFC SW, 100m (OM4)FTLF8532P4BNV32GFC SW, 100m (OM4)FTLF8532P4PCV32GFC SW, 100m (OM4)FTLF8532P5BCV32GFC SW, 100m (OM4)FTLF8532P5BNV32GFC SW, 100m (OM4)FTLF8532P5PCV32GFC SW, 100m (OM4)Government, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales