Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTR-1621-49 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTR-1621-49 CWDM multi-rate GBIC CWDM 1491nm
up to 2.67 Gb/s CWDM multi-rate (to 2.67G), APD rx (non-RoHS) GBIC transceiver, CWDM 1491nm.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTR-1621-49
- Family
- FTR-1621 CWDM GBIC
- Category
- Fiber optic transceiver modules
- Datasheet
- FTR-1621-49 datasheet (PDF)
FTR-1621-49 specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTR-1621-49 |
| Product family | FTR-1621 CWDM GBIC |
| Form factor | GBIC |
| Standards / application | Fibre Channel FC-PH/PH2/PH3 (1x/2x), IEEE 802.3, SONET OC-3/12/48 compatible |
| Data rate | 0.125–2.7 Gb/s |
| Wavelength | 1470/1490/1510/1530/1550/1570/1590/1610 nm (8 CWDM channels); centre (x−4) to (x+6) nm |
| Laser | Uncooled CWDM-rated DFB |
| Receiver | APD |
| Reach | Total system budget 27–31 dB @2.5 Gb/s, BER<10⁻¹² (30 dB headline); dispersion penalty 2.0 dB @60 km, 3.0 dB @100 km |
| Tx output power | +1.0 to +5 dBm (typ +3.0) |
| Rx sensitivity | −27.0 dBm @2.5 Gb/s, BER<10⁻¹² (−28.0 dBm @ BER<10⁻⁹) |
| Rx overload / max input | −7 dBm (max input power) |
| Extinction ratio | 8.2 dB min |
| Supply voltage | 5 V (4.75–5.25 V) |
| Power dissipation | Supply current 280–350 mA (as printed) |
| Operating temperature | 0 to 60 °C case |
| Compliance | CDRH and IEC-825 Class 1 laser product |
| Lifecycle | Legacy / end-of-life |
| Variant note | Wavelength 1490 nm |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTR-1621-49
The Finisar FTR-1621-49 (now a Coherent Corp. product, formerly II-VI) is a GBIC CWDM multi-rate (to 2.67G), APD rx (non-RoHS) optical transceiver for up to 2.67 Gb/s links at CWDM 1491nm over SMF. It belongs to Finisar's FTR-1621 CWDM GBIC family, which has 8 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. This is a legacy Finisar part; we help buyers find remaining stock or a current Coherent alternative. Typical uses: Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
- All Metro data protocols from 125 Mb/s to 2.7 Gb/s
- Extended link budget of 30 dB with APD receiver technology
- Uncooled CWDM-rated DFB laser transmitter
- Standard GBIC footprint
- Very low jitter
- Metal enclosure for lower EMI
FTR-1621-49: frequently asked questions
What is the Finisar FTR-1621-49?
The FTR-1621-49 is a Finisar GBIC transceiver for CWDM multi-rate (to 2.67G), APD rx (non-RoHS) at up to 2.67 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Gigabit Ethernet, 1/2/4G Fibre Channel SAN, SONET OC-48 / STM-16 and CWDM/DWDM metro links.
What is the maximum distance of the FTR-1621-49?
Share your link length and fibre type and we will confirm the reach of the FTR-1621-49 from the Finisar datasheet before you order.
What is the optical power budget of the FTR-1621-49?
Per the Finisar family datasheet, the FTR-1621-49 transmits +1.0 to +5 dBm (typ +3.0) and has a receiver sensitivity of −27.0 dBm @2.5 Gb/s, BER<10⁻¹² (−28.0 dBm @ BER<10⁻⁹). Maximum receiver input is −7 dBm (max input power).
Which fiber and connector does the FTR-1621-49 use?
The FTR-1621-49 works at CWDM 1491nm over SMF. CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.
Will the FTR-1621-49 work in my Cisco, Juniper, Arista or HPE switch?
The FTR-1621-49 follows the GBIC MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTR-1621-49 vs FTR-1621-47: what is the difference?
Both are in Finisar's FTR-1621 CWDM GBIC family. They differ in wavelength (CWDM 1491nm vs CWDM 1471nm). Pick the variant that matches your temperature, latch and wavelength needs.
What does the FTR-1621-49 part number mean?
The FTR- prefix marks Finisar's GBIC family. The remaining characters identify the optical design and build variant.
Is the FTR-1621-49 still available?
The FTR-1621-49 is a legacy Finisar part, so new production is limited or ended. Next Gen Networks helps source remaining genuine stock and can suggest a current Coherent alternative with the same reach and wavelength.
What is the FTR-1621-49 price in India and how do I order?
The Finisar FTR-1621-49 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTR-1621-49 need?
It runs from 5 V (4.75–5.25 V) with power dissipation of Supply current 280–350 mA (as printed).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTR-1621-47CWDM multi-rateFTR-1621-51CWDM multi-rateFTR-1621-53CWDM multi-rateFTR-1621-55CWDM multi-rateFTR-1621-57CWDM multi-rateFTR-1621-59CWDM multi-rateGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales