- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX3815M328
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX3815M328 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX3815M328 DWDM multirate XFP 1554.94nm 80km
10 Gb/s class DWDM multirate (SONET/10GE/10GFC), amplified XFP transceiver, 1554.94nm (ITU C28), up to 80km, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX3815M328
- Family
- FTLX3815
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX3815M328 datasheet (PDF)
FTLX3815M328 specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX3815M328 |
| Product family | FTLX3815 |
| Form factor | XFP |
| Standards / application | ITU-T G.698.1/G.698.2 DWDM; IEEE 10GBASE-ZR-based Ethernet; 10GFC SM-1200-LL-L; 8GFC SM-800-LC-L; ITU-T G.709 OTN/FEC; amplified SONET/SDH |
| Data rate | 8.5 to 11.35 Gb/s |
| Wavelength | C-band, 100 GHz ITU grid, ch17–61 (1563.86–1528.77 nm) |
| Laser | 1550 nm EML |
| Reach | 80 km |
| Connector | Duplex LC |
| Tx output power | −1 to +3 dBm |
| Rx sensitivity | −24 dBm @BER 1e-12 (8.5–10.3 Gb/s); −27 dBm @BER 1e-4 (10.7–11.3 Gb/s) |
| Rx overload / max input | −6 dBm |
| Extinction ratio | 8.2 dB min |
| Supply voltage | Vcc3 3.13–3.46 V; Vcc5 4.75–5.25 V |
| Power dissipation | < 3.5 W |
| Operating temperature | Commercial |
| Diagnostics | Digital diagnostics via 2-wire serial interface (incl. TEC temperature) |
| Compliance | RoHS-6 (lead-free) |
| Lifecycle | Current production |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX3815M328
The Finisar FTLX3815M328 (now a Coherent Corp. product, formerly II-VI) is a XFP DWDM multirate (SONET/10GE/10GFC), amplified optical transceiver for 10 Gb/s class links at 1554.94nm (ITU C28) over Duplex SMF LC, with reach up to 80km. It is a commercial-temperature part. It belongs to Finisar's FTLX3815 family, which has 45 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Supports 8.5Gb/s to 11.35Gb/s
- 100GHz ITU Grid, C-Band
- Power dissipation <3.5W
- Built-in digital diagnostic functions
- Temperature range: 0°C to 70°C
- Reference Clock Not Required
FTLX3815M328: frequently asked questions
What is the Finisar FTLX3815M328?
The FTLX3815M328 is a Finisar XFP transceiver for DWDM multirate (SONET/10GE/10GFC), amplified at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX3815M328?
The FTLX3815M328 is specified for up to 80km over Duplex SMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX3815M328?
Per the Finisar family datasheet, the FTLX3815M328 transmits −1 to +3 dBm and has a receiver sensitivity of −24 dBm @BER 1e-12 (8.5–10.3 Gb/s); −27 dBm @BER 1e-4 (10.7–11.3 Gb/s). Maximum receiver input is −6 dBm.
Does the FTLX3815M328 support DDM / digital diagnostics?
Yes. Digital diagnostics via 2-wire serial interface (incl. TEC temperature). Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX3815M328 use?
The FTLX3815M328 works at 1554.94nm (ITU C28) over Duplex SMF LC. CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.
Will the FTLX3815M328 work in my Cisco, Juniper, Arista or HPE switch?
The FTLX3815M328 follows the XFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX3815M328 vs FTLX3815M317: what is the difference?
Both are in Finisar's FTLX3815 family. They differ in wavelength (1554.94nm (ITU C28) vs 1563.86nm (ITU C17)). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX3815M328 rated for?
The FTLX3815M328 is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLX3815M328 part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX3815M328 genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX3815M328 price in India and how do I order?
The Finisar FTLX3815M328 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX3815M328 need?
It runs from Vcc3 3.13–3.46 V; Vcc5 4.75–5.25 V with power dissipation of < 3.5 W.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX3815M317DWDM multirate, 80kmFTLX3815M318DWDM multirate, 80kmFTLX3815M319DWDM multirate, 80kmFTLX3815M320DWDM multirate, 80kmFTLX3815M321DWDM multirate, 80kmFTLX3815M322DWDM multirate, 80kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales