- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX8571D3BCL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX8571D3BCL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX8571D3BCL 10GBASE-SR/SW SFP+ 850nm 300m OM3
10 Gb/s class 10GBASE-SR/SW SFP+ transceiver, 850nm, up to 300m OM3, commercial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX8571D3BCL
- Family
- FTLX8571
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX8571D3BCL datasheet (PDF)
FTLX8571D3BCL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX8571D3BCL |
| Product family | FTLX8571 |
| Form factor | SFP+ |
| Standards / application | 10GBASE-SR/SW; 10G Fibre Channel 1200-Mx-SN-I; SFF-8431, SFF-8432; IEEE 802.3ae |
| Data rate | 9.95–10.5 Gb/s |
| Wavelength | 850 nm (840–860 nm) |
| Laser | Uncooled 850 nm VCSEL |
| Receiver | Limiting electrical interface |
| Reach | 300 m on 2000 MHz·km MMF (OM3) |
| Connector | Duplex LC |
| Tx output power | −5 to −1 dBm average launch |
| Rx sensitivity | −11.1 dBm OMA @10.5 Gb/s |
| Rx overload / max input | +0.5 dBm |
| Extinction ratio | 3.0–5.5 dB |
| Supply voltage | 3.3 V (3.14–3.46 V) |
| Power dissipation | < 1 W |
| Operating temperature | Commercial |
| Diagnostics | Digital diagnostics per SFF-8472, 2-wire serial |
| Compliance | RoHS-6 |
| Lifecycle | Legacy / end-of-life |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX8571D3BCL
The Finisar FTLX8571D3BCL (now a Coherent Corp. product, formerly II-VI) is a SFP+ 10GBASE-SR/SW optical transceiver for 10 Gb/s class links at 850nm over Duplex MMF LC, with reach up to 300m OM3. It is a commercial-temperature part. It belongs to Finisar's FTLX8571 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. This is a legacy Finisar part; we help buyers find remaining stock or a current Coherent alternative. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Up to 10.5 Gb/s
- Maximum link length of 300 m on 2000 MHz·km MMF
- Uncooled 850 nm VCSEL laser
- Hot-pluggable SFP+ footprint
- Power dissipation < 1 W
- RoHS-6 compliant
FTLX8571D3BCL: frequently asked questions
What is the Finisar FTLX8571D3BCL?
The FTLX8571D3BCL is a Finisar SFP+ transceiver for 10GBASE-SR/SW at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX8571D3BCL?
The FTLX8571D3BCL is specified for up to 300m OM3 over Duplex MMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX8571D3BCL?
Per the Finisar family datasheet, the FTLX8571D3BCL transmits −5 to −1 dBm average launch and has a receiver sensitivity of −11.1 dBm OMA @10.5 Gb/s. Maximum receiver input is +0.5 dBm.
Does the FTLX8571D3BCL support DDM / digital diagnostics?
Yes. Digital diagnostics per SFF-8472, 2-wire serial. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX8571D3BCL use?
The FTLX8571D3BCL works at 850nm over Duplex MMF LC. Both ends of a link must use the same optical standard.
Will the FTLX8571D3BCL work in my Cisco, Juniper, Arista or HPE switch?
The FTLX8571D3BCL follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX8571D3BCL vs FTLX8571D3BNL: what is the difference?
Both are in Finisar's FTLX8571 family. They differ in temperature grade (commercial vs extended); build / application (10GBASE-SR/SW vs 10GBASE-SR/SW, 10GFC). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX8571D3BCL rated for?
The FTLX8571D3BCL is a commercial-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLX8571D3BCL part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is the FTLX8571D3BCL still available?
The FTLX8571D3BCL is a legacy Finisar part, so new production is limited or ended. Next Gen Networks helps source remaining genuine stock and can suggest a current Coherent alternative with the same reach and wavelength.
What is the FTLX8571D3BCL price in India and how do I order?
The Finisar FTLX8571D3BCL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX8571D3BCL need?
It runs from 3.3 V (3.14–3.46 V) with power dissipation of < 1 W.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX8571D3BNL10GBASE-SR/SW, 10GFC, 300m OM3FTLX8574D3BCL10GBASE-SR/SW, 10GFC, 300m OM3/400m OM4FTLX8573D3BTL10GBASE-SR, 400mFTLX1371D3BCL10GBASE-LRM, 220mFTLX1370W4BTL10G CPRI/OBSAI wireless, 1.4kmFTLX1475D3BCL10GBASE-LR/LW, 10GFC, 10kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales