- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX1472M3BNL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX1472M3BNL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX1472M3BNL 10GBASE-LR SFP+ 1310nm 10km
10 Gb/s class 10GBASE-LR / OC-192 SR-1 multirate SFP+ transceiver, 1310nm, up to 10km, extended temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX1472M3BNL
- Family
- FTLX1472
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX1472M3BNL datasheet (PDF)
FTLX1472M3BNL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX1472M3BNL |
| Product family | FTLX1472 |
| Form factor | SFP+ |
| Standards / application | SFF-8431, SFF-8432, ITU-T G.693, IEEE 802.3ae, FC-PI-5 |
| Data rate | 8.5 Gb/s and 9.95328–11.3168 Gb/s |
| Wavelength | 1290–1330 nm |
| Laser | Un-cooled 1310 nm DFB |
| Receiver | Limiting electrical interface |
| Reach | 2 km / 10 km over G.652 SMF |
| Connector | Duplex LC |
| Tx output power | −6 to −1 dBm |
| Rx sensitivity | −13.8 dBm @ 8.5G; −12.6 dBm @ 10.3/10.5G; −11.0 dBm @ 9.95/10.7G |
| Rx overload / max input | +0.5 dBm |
| Extinction ratio | 6 dB |
| Supply voltage | 3.3 V (3.14–3.46 V) |
| Power dissipation | < 1.5 W |
| Operating temperature | Extended |
| Diagnostics | Digital diagnostics via 2-wire serial interface |
| Compliance | RoHS-6 |
| Lifecycle | Current production |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX1472M3BNL
The Finisar FTLX1472M3BNL (now a Coherent Corp. product, formerly II-VI) is a SFP+ 10GBASE-LR / OC-192 SR-1 multirate optical transceiver for 10 Gb/s class links at 1310nm over Duplex SMF LC, with reach up to 10km. It is an extended-temperature part. It belongs to Finisar's FTLX1472 family, which has 3 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Hot-pluggable SFP+ footprint
- Supports 8.5Gb/s and from 9.95 to 11.3Gb/s bit rates
- Power dissipation < 1.5W
- Commercial temperature range -5°C to 75°C
- Maximum link length of 10km
- Un-cooled 1310nm DFB laser
FTLX1472M3BNL: frequently asked questions
What is the Finisar FTLX1472M3BNL?
The FTLX1472M3BNL is a Finisar SFP+ transceiver for 10GBASE-LR / OC-192 SR-1 multirate at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX1472M3BNL?
The FTLX1472M3BNL is specified for up to 10km over Duplex SMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX1472M3BNL?
Per the Finisar family datasheet, the FTLX1472M3BNL transmits −6 to −1 dBm and has a receiver sensitivity of −13.8 dBm @ 8.5G; −12.6 dBm @ 10.3/10.5G; −11.0 dBm @ 9.95/10.7G. Maximum receiver input is +0.5 dBm.
Does the FTLX1472M3BNL support DDM / digital diagnostics?
Yes. Digital diagnostics via 2-wire serial interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX1472M3BNL use?
The FTLX1472M3BNL works at 1310nm over Duplex SMF LC. Both ends of a link must use the same optical standard.
Will the FTLX1472M3BNL work in my Cisco, Juniper, Arista or HPE switch?
The FTLX1472M3BNL follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX1472M3BNL vs FTLX1472M3BCL: what is the difference?
Both are in Finisar's FTLX1472 family. They differ in temperature grade (extended vs commercial). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX1472M3BNL rated for?
The FTLX1472M3BNL is an extended-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLX1472M3BNL part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX1472M3BNL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX1472M3BNL price in India and how do I order?
The Finisar FTLX1472M3BNL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX1472M3BNL need?
It runs from 3.3 V (3.14–3.46 V) with power dissipation of < 1.5 W.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX1472M3BCL10GBASE-LR / OC-192 SR-1 multirate, 10kmFTLX1472M3BTL10GBASE-LR / OC-192 SR-1 multirate, 10kmFTLX1371D3BCL10GBASE-LRM, 220mFTLX1370W4BTL10G CPRI/OBSAI wireless, 1.4kmFTLX1475D3BCL10GBASE-LR/LW, 10GFC, 10kmFTLX1772M3BCL10G multirate 40km, 40kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales