- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX2672D333
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX2672D333 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX2672D333 10G BiDi 30km, CPRI/GbE/FC SFP+ 30km
10 Gb/s class 10G BiDi 30km, CPRI/GbE/FC SFP+ transceiver, Tx 1331/Rx 1271nm, up to 30km, industrial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX2672D333
- Family
- FTLX2672
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX2672D333 datasheet (PDF)
FTLX2672D333 specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX2672D333 |
| Product family | FTLX2672 |
| Form factor | SFP+ |
| Standards / application | SFF-8431, IEEE 802.3ae 10GBASE-LR/LW, 10G FC 1200-SM-LL-L, SFF-8472 |
| Data rate | 1.0–11.3 Gb/s |
| Wavelength | BiDi 1271/1331 nm |
| Laser | Uncooled DFB |
| Receiver | PIN |
| Reach | 30 km single-strand SMF |
| Connector | Single LC |
| Supply voltage | 3.3 V |
| Operating temperature | Industrial |
| Diagnostics | SFF-8472 |
| Compliance | RoHS |
| Lifecycle | Current production |
| Variant note | 1331 nm side of the BiDi pair (same caveat) |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX2672D333
The Finisar FTLX2672D333 (now a Coherent Corp. product, formerly II-VI) is a SFP+ 10G BiDi 30km, CPRI/GbE/FC optical transceiver for 10 Gb/s class links at Tx 1331/Rx 1271nm over Simplex SMF LC (BiDi), with reach up to 30km. It is an industrial-temperature part. It belongs to Finisar's FTLX2672 family, which has 2 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Hot-pluggable SFP+ footprint
- Bidirectional 10G over single strand single mode fiber
- Supports 1.0 to 11.3 Gb/s bit rates
- Uncooled DFB
- Single LC connector
FTLX2672D333: frequently asked questions
What is the Finisar FTLX2672D333?
The FTLX2672D333 is a Finisar SFP+ transceiver for 10G BiDi 30km, CPRI/GbE/FC at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX2672D333?
The FTLX2672D333 is specified for up to 30km over Simplex SMF LC (BiDi). Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
Which fiber and connector does the FTLX2672D333 use?
The FTLX2672D333 works at Tx 1331/Rx 1271nm over Simplex SMF LC (BiDi). Both ends of a link must use the same optical standard.
Does the FTLX2672D333 support DDM / digital diagnostics?
Yes. SFF-8472. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Will the FTLX2672D333 work in my Cisco, Juniper, Arista or HPE switch?
The FTLX2672D333 follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX2672D333 vs FTLX2672D327: what is the difference?
Both are in Finisar's FTLX2672 family. They differ in wavelength (Tx 1331/Rx 1271nm vs Tx 1271/Rx 1331nm). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX2672D333 rated for?
The FTLX2672D333 is an industrial-temperature part. Industrial grade suits outdoor cabinets, telecom huts and plant floors.
What does the FTLX2672D333 part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX2672D333 genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX2672D333 price in India and how do I order?
The Finisar FTLX2672D333 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX2672D333 need?
It runs from 3.3 V.
Related Finisar parts
FTLX2672D32710G BiDi 30km, CPRI/GbE/FC, 30kmFTLX2072D32710G BiDi Gen2, 10kmFTLX2071D32710G BiDi, 10kmFTLX8574D3BCL10GBASE-SR/SW, 10GFC, 300m OM3/400m OM4FTLX8573D3BTL10GBASE-SR, 400mFTLX1371D3BCL10GBASE-LRM, 220mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales