- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX3671MTC47
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX3671MTC47 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX3671MTC47 DWDM fixed 1.2-11.3G SFP+ 1539.77nm 40km
10 Gb/s class DWDM fixed 1.2-11.3G multirate (CDR) SFP+ transceiver, 1539.77nm (ITU C47), up to 40km, industrial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX3671MTC47
- Family
- FTLX3671MTC
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX3671MTC47 datasheet (PDF)
FTLX3671MTC47 specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX3671MTC47 |
| Product family | FTLX3671MTC |
| Form factor | SFP+ |
| Standards / application | SFF-8431, SFF-8432 |
| Data rate | 1.2288–11.3176 Gb/s |
| Wavelength | DWDM C-band, 100 GHz, C20–C60 (192.00–196.00 THz; 1561.42–1529.55 nm) |
| Laser | Cooled 1550 nm EML |
| Receiver | PIN receiver with limiting interface |
| Reach | Up to 40 km |
| Connector | Duplex LC |
| Tx output power | −1 to +4 dBm |
| Rx sensitivity | −16.0 dBm (1.2–10.7G) / −15.0 dBm (11.1–11.3G) at 0 ps/nm; −15.0 / −14.0 dBm at 800 ps/nm |
| Rx overload / max input | −1 dBm (<9.83 Gb/s); 0 dBm (≥9.83 Gb/s) |
| Extinction ratio | 8.2 dB |
| Supply voltage | 3.3 V (3.14–3.46 V) |
| Power dissipation | 1.9 W (CDR on); 1.6 W (CDR off) |
| Operating temperature | Industrial |
| Diagnostics | SFF-8472 via 2-wire serial interface |
| Compliance | RoHS-6 (2011/65/EU) |
| Lifecycle | Current production |
| Variant note | ITU 100 GHz channel C47 |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX3671MTC47
The Finisar FTLX3671MTC47 (now a Coherent Corp. product, formerly II-VI) is a SFP+ DWDM fixed 1.2-11.3G multirate (CDR) optical transceiver for 10 Gb/s class links at 1539.77nm (ITU C47) over Duplex SMF LC, with reach up to 40km. It is an industrial-temperature part. It belongs to Finisar's FTLX3671MTC family, which has 41 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- 100 GHz spacing, DWDM C-band
- Up to 40km link length
- PIN Receiver with limiting interface
- 1.2 through 11.3 Gb/s data rates
- -40/85°C case temperature range
- Cooled 1550nm EML laser
FTLX3671MTC47: frequently asked questions
What is the Finisar FTLX3671MTC47?
The FTLX3671MTC47 is a Finisar SFP+ transceiver for DWDM fixed 1.2-11.3G multirate (CDR) at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX3671MTC47?
The FTLX3671MTC47 is specified for up to 40km over Duplex SMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX3671MTC47?
Per the Finisar family datasheet, the FTLX3671MTC47 transmits −1 to +4 dBm and has a receiver sensitivity of −16.0 dBm (1.2–10.7G) / −15.0 dBm (11.1–11.3G) at 0 ps/nm; −15.0 / −14.0 dBm at 800 ps/nm. Maximum receiver input is −1 dBm (<9.83 Gb/s); 0 dBm (≥9.83 Gb/s).
Does the FTLX3671MTC47 support DDM / digital diagnostics?
Yes. SFF-8472 via 2-wire serial interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX3671MTC47 use?
The FTLX3671MTC47 works at 1539.77nm (ITU C47) over Duplex SMF LC. CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.
Will the FTLX3671MTC47 work in my Cisco, Juniper, Arista or HPE switch?
The FTLX3671MTC47 follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX3671MTC47 vs FTLX3671MTC20: what is the difference?
Both are in Finisar's FTLX3671MTC family. They differ in wavelength (1539.77nm (ITU C47) vs 1561.42nm (ITU C20)). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX3671MTC47 rated for?
The FTLX3671MTC47 is an industrial-temperature part. Industrial grade suits outdoor cabinets, telecom huts and plant floors.
What does the FTLX3671MTC47 part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX3671MTC47 genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX3671MTC47 price in India and how do I order?
The Finisar FTLX3671MTC47 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX3671MTC47 need?
It runs from 3.3 V (3.14–3.46 V) with power dissipation of 1.9 W (CDR on); 1.6 W (CDR off).
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX3671MTC20DWDM fixed 1.2-11.3G multirate, 40kmFTLX3671MTC21DWDM fixed 1.2-11.3G multirate, 40kmFTLX3671MTC22DWDM fixed 1.2-11.3G multirate, 40kmFTLX3671MTC23DWDM fixed 1.2-11.3G multirate, 40kmFTLX3671MTC24DWDM fixed 1.2-11.3G multirate, 40kmFTLX3671MTC25DWDM fixed 1.2-11.3G multirate, 40kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales