Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FWLF15197D53 stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FWLF15197D53 CWDM GbE SFP CWDM 1531nm 80km
1 Gb/s CWDM GbE / 1-2G FC SFP transceiver, CWDM 1531nm, up to 80km, commercial (0 to 70 °c) temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FWLF15197D53
- Family
- FWLF15197D
- Category
- Fiber optic transceiver modules
- Datasheet
- FWLF15197D53 datasheet (PDF)
FWLF15197D53 specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FWLF15197D53 |
| Product family | FWLF15197D |
| Form factor | SFP |
| Standards / application | SFP MSA |
| Data rate | 0.622–1.25 Gb/s |
| Wavelength | 1471/1491/1511/1531/1551/1571/1591/1611 nm (8 CWDM channels) |
| Laser | Uncooled DFB |
| Reach | Link budget 23.0–25.0 dB @1.25 Gb/s, BER<10⁻¹² |
| Connector | Duplex LC |
| Tx output power | 0 to +5 dBm |
| Rx sensitivity | −23.0 dBm |
| Rx overload / max input | 0 dBm |
| Extinction ratio | 9 dB |
| Supply voltage | 3.3 V (3.15–3.60 V) |
| Power dissipation | < 700 mW |
| Operating temperature | Commercial (0 to 70 °C) |
| Diagnostics | Built-in digital diagnostics, 2-wire serial interface |
| Compliance | Class 1 laser product (FDA/CDRH, IEC-825-1) |
| Lifecycle | Current production |
| Variant note | Wavelength 1531 nm (clasp color: green) |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FWLF15197D53
The Finisar FWLF15197D53 (now a Coherent Corp. product, formerly II-VI) is a SFP CWDM GbE / 1-2G FC optical transceiver for 1 Gb/s links at CWDM 1531nm over SMF, with reach up to 80km. It is a commercial-temperature part rated 0 to 70 °C. It belongs to Finisar's FWLF15197D family, which has 8 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.
- Hot-pluggable SFP footprint
- Built-in digital diagnostic functions
- Uncooled DFB laser transmitter
- Very low jitter
- Metal enclosure, for lower EMI
- Single 3.3V power supply
FWLF15197D53: frequently asked questions
What is the Finisar FWLF15197D53?
The FWLF15197D53 is a Finisar SFP transceiver for CWDM GbE / 1-2G FC at 1 Gb/s. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for Fast/Gigabit Ethernet, SONET/SDH OC-3/OC-12, campus and access links, and legacy network upgrades.
What is the maximum distance of the FWLF15197D53?
The FWLF15197D53 is specified for up to 80km over SMF. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FWLF15197D53?
Per the Finisar family datasheet, the FWLF15197D53 transmits 0 to +5 dBm and has a receiver sensitivity of −23.0 dBm. Maximum receiver input is 0 dBm.
Does the FWLF15197D53 support DDM / digital diagnostics?
Yes. Built-in digital diagnostics, 2-wire serial interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FWLF15197D53 use?
The FWLF15197D53 works at CWDM 1531nm over SMF. CWDM/DWDM optics must match the channel of your mux/demux port. Both ends of a link must use the same optical standard.
Will the FWLF15197D53 work in my Cisco, Juniper, Arista or HPE switch?
The FWLF15197D53 follows the SFP MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FWLF15197D53 vs FWLF15197D47: what is the difference?
Both are in Finisar's FWLF15197D family. They differ in wavelength (CWDM 1531nm vs CWDM 1471nm). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FWLF15197D53 rated for?
The FWLF15197D53 is a commercial-temperature part rated 0 to 70 °C. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FWLF15197D53 part number mean?
The FWLF prefix marks Finisar's CWDM / DWDM wavelength-specific SFP family. The C letter in the suffix usually marks the commercial temperature grade. The remaining characters identify the optical design and build variant.
Is your FWLF15197D53 genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FWLF15197D53 price in India and how do I order?
The Finisar FWLF15197D53 price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FWLF15197D53 need?
It runs from 3.3 V (3.15–3.60 V) with power dissipation of < 700 mW.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FWLF15197D47CWDM GbE / 1-2G FC, 80kmFWLF15197D49CWDM GbE / 1-2G FC, 80kmFWLF15197D51CWDM GbE / 1-2G FC, 80kmFWLF15197D55CWDM GbE / 1-2G FC, 80kmFWLF15197D57CWDM GbE / 1-2G FC, 80kmFWLF15197D59CWDM GbE / 1-2G FC, 80kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales