- Home
- Optical Transceivers
- Finisar (Coherent)
- 10G
- FTLX8574D3BTL
Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX8574D3BTL stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX8574D3BTL 10GBASE-SR/SW SFP+ 850nm 400m OM4
10 Gb/s class 10GBASE-SR/SW SFP+ transceiver, 850nm, up to 400m OM4, industrial temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX8574D3BTL
- Family
- FTLX8574
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX8574D3BTL datasheet (PDF)
FTLX8574D3BTL specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX8574D3BTL |
| Product family | FTLX8574 |
| Form factor | SFP+ |
| Standards / application | IEEE 802.3-2012 10GBASE-SR/SW; 10G Fibre Channel 1200-Mx-SN-I; SFF-8431, SFF-8432 |
| Data rate | 9.95–10.5 Gb/s (BCV also 1.25 Gb/s) |
| Wavelength | 850 nm (840–860 nm) |
| Laser | Uncooled 850 nm VCSEL |
| Receiver | PIN, limiting electrical interface |
| Reach | OM4 400 m; OM3 300 m; OM2 66 m; OM1 26 m |
| Connector | Duplex LC |
| Tx output power | −5 to −1 dBm average launch (OMA ≥ −1.5 dBm) |
| Rx sensitivity | −11.1 dBm unstressed OMA; −7.5 dBm stressed OMA @10.3 Gb/s |
| Rx overload / max input | +0.5 dBm |
| Extinction ratio | 3.0–5.5 dB |
| Supply voltage | 3.3 V (3.14–3.46 V) |
| Power dissipation | < 1 W |
| Operating temperature | Industrial |
| Diagnostics | Digital diagnostics per SFF-8472, 2-wire serial |
| Compliance | RoHS-6 (2011/65/EU) |
| Lifecycle | Current production |
Optical and electrical values are from the Finisar / Coherent family datasheet; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX8574D3BTL
The Finisar FTLX8574D3BTL (now a Coherent Corp. product, formerly II-VI) is a SFP+ 10GBASE-SR/SW optical transceiver for 10 Gb/s class links at 850nm over Duplex MMF LC, with reach up to 400m OM4. It is an industrial-temperature part. It belongs to Finisar's FTLX8574 family, which has 4 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- Supports 9.95 to 10.5 Gb/s bit rates
- Maximum link length of 400 m on OM4 MMF
- Hot-pluggable SFP+ footprint
- Uncooled 850 nm VCSEL laser
- Power dissipation < 1 W
- Built-in digital diagnostic functions
FTLX8574D3BTL: frequently asked questions
What is the Finisar FTLX8574D3BTL?
The FTLX8574D3BTL is a Finisar SFP+ transceiver for 10GBASE-SR/SW at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX8574D3BTL?
The FTLX8574D3BTL is specified for up to 400m OM4 over Duplex MMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX8574D3BTL?
Per the Finisar family datasheet, the FTLX8574D3BTL transmits −5 to −1 dBm average launch (OMA ≥ −1.5 dBm) and has a receiver sensitivity of −11.1 dBm unstressed OMA; −7.5 dBm stressed OMA @10.3 Gb/s. Maximum receiver input is +0.5 dBm.
Does the FTLX8574D3BTL support DDM / digital diagnostics?
Yes. Digital diagnostics per SFF-8472, 2-wire serial. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX8574D3BTL use?
The FTLX8574D3BTL works at 850nm over Duplex MMF LC. Both ends of a link must use the same optical standard.
Will the FTLX8574D3BTL work in my Cisco, Juniper, Arista or HPE switch?
The FTLX8574D3BTL follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX8574D3BTL vs FTLX8574D3BCL: what is the difference?
Both are in Finisar's FTLX8574 family. They differ in temperature grade (industrial vs commercial); reach (400m OM4 vs 300m OM3/400m OM4); build / application (10GBASE-SR/SW vs 10GBASE-SR/SW, 10GFC). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX8574D3BTL rated for?
The FTLX8574D3BTL is an industrial-temperature part. Industrial grade suits outdoor cabinets, telecom huts and plant floors.
What does the FTLX8574D3BTL part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The I letter in the suffix usually marks the industrial temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX8574D3BTL genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX8574D3BTL price in India and how do I order?
The Finisar FTLX8574D3BTL price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX8574D3BTL need?
It runs from 3.3 V (3.14–3.46 V) with power dissipation of < 1 W.
Documents
NextGen datasheetPDF · specs, FAQ & buying guideManufacturer datasheet
Finisar / Coherent family datasheet
Related Finisar parts
FTLX8574D3BCL10GBASE-SR/SW, 10GFC, 300m OM3/400m OM4FTLX8574D3BNL10GBASE-SR/SW, 10GFC, 300m OM3/400m OM4FTLX8574D3BCV10GBASE-SR + 1000BASE-SX dual-rate, 400m OM4FTLX8573D3BTL10GBASE-SR, 400mFTLX8571D3BCL10GBASE-SR/SW, 300m OM3FTLX1371D3BCL10GBASE-LRM, 220mGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales