Actual product photos
available on request
To keep listings accurate, we share real photos of the exact FTLX6882MNC stock you will receive, including the label, serial number and packaging.
Request photos from our teamPhotos are usually shared within working hours on WhatsApp or email.
Finisar FTLX6882MNC Tunable T-SFP+ 11.3G 80km
10 Gb/s class Tunable T-SFP+ 11.3G multirate, limiting APD SFP+ transceiver, C-band tunable DWDM 100GHz, up to 80km, extended temperature.
- Manufacturer
- Coherent Corp. (formerly Finisar / II-VI)
- Mfr part number
- FTLX6882MNC
- Family
- FTLX6882
- Category
- Fiber optic transceiver modules
- Datasheet
- FTLX6882MNC datasheet (PDF)
FTLX6882MNC specifications
| Attribute | Value |
|---|---|
| Manufacturer | Coherent Corp. (Finisar) |
| Manufacturer part number | FTLX6882MNC |
| Product family | FTLX6882 |
| Form factor | SFP+ |
| Standards / application | SFF-8418, SFF-8419 (Power Class 4 >2 W), SFF-8432, SFF-8690, G.698.1 DS100S1-2Dz(C); SONET OC-192, SDH STM-64, 10GbE ZR, 10G FC |
| Data rate | 11.3 Gb/s multi-rate |
| Wavelength | Full C-band tunable |
| Laser | Tunable (Monolithic MZM tunable TOSA per EPS for MTC) |
| Receiver | Limiting APD |
| Reach | 80 km |
| Connector | Duplex LC |
| Tx output power | −1 dBm (as listed) |
| Supply voltage | 3.3 V |
| Power dissipation | SFF-8419 Power Class 4 (>2 W) |
| Operating temperature | Extended |
| Diagnostics | SFF-8472 via 2-wire serial interface |
| Compliance | RoHS |
| Lifecycle | Current production |
| Variant note | -5 to 85 °C (EPS Global) |
Optical and electrical values are from the Finisar / Coherent family datasheet or product page where available; temperature grade is per part number. Confirm critical values with us before ordering.
About the Finisar FTLX6882MNC
The Finisar FTLX6882MNC (now a Coherent Corp. product, formerly II-VI) is a SFP+ Tunable T-SFP+ 11.3G multirate, limiting APD optical transceiver for 10 Gb/s class links at C-band tunable DWDM 100GHz over Duplex SMF LC, with reach up to 80km. It is an extended-temperature part. It belongs to Finisar's FTLX6882 family, which has 3 orderable variants that differ by temperature grade, latch, receiver build or wavelength channel. Typical uses: 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
- DWDM, full band tunable (C-Band), Limiting APD
- Amplified SONET/SDH and 10GbE
- 80km, High Performance, CDR
- Digital diagnostics via 2-wire serial interface
FTLX6882MNC: frequently asked questions
What is the Finisar FTLX6882MNC?
The FTLX6882MNC is a Finisar SFP+ transceiver for Tunable T-SFP+ 11.3G multirate, limiting APD at 10 Gb/s class. Finisar is now part of Coherent Corp. (formerly II-VI), and the part number is unchanged. It is used for 10G Ethernet, 10G Fibre Channel, SONET OC-192 / OTN and DWDM metro / DCI links.
What is the maximum distance of the FTLX6882MNC?
The FTLX6882MNC is specified for up to 80km over Duplex SMF LC. Long-reach optics may need an attenuator on short links; we can advise based on your link loss.
What is the optical power budget of the FTLX6882MNC?
Per the Finisar family datasheet, the FTLX6882MNC transmits −1 dBm (as listed).
Does the FTLX6882MNC support DDM / digital diagnostics?
Yes. SFF-8472 via 2-wire serial interface. Your switch can read live temperature, voltage, laser bias and Tx/Rx power.
Which fiber and connector does the FTLX6882MNC use?
The FTLX6882MNC works at C-band tunable DWDM 100GHz over Duplex SMF LC. Both ends of a link must use the same optical standard.
Will the FTLX6882MNC work in my Cisco, Juniper, Arista or HPE switch?
The FTLX6882MNC follows the SFP+ MSA, so it fits any matching port. It carries Finisar's own EEPROM programming; switches that check the module vendor may need a configuration setting or a vendor-branded optic. Send us your switch model and we confirm before dispatch.
FTLX6882MNC vs FTLX6882MCC: what is the difference?
Both are in Finisar's FTLX6882 family. They differ in temperature grade (extended vs commercial). Pick the variant that matches your temperature, latch and wavelength needs.
What temperature range is the FTLX6882MNC rated for?
The FTLX6882MNC is an extended-temperature part. Choose an industrial (T) variant for outdoor or uncontrolled sites.
What does the FTLX6882MNC part number mean?
The FTLX prefix marks Finisar's 10G family (SFP+, XFP, X2, XENPAK). The E letter in the suffix usually marks the extended temperature grade. The remaining characters identify the optical design and build variant.
Is your FTLX6882MNC genuine Finisar?
Yes. Next Gen Networks supplies original Finisar / Coherent modules, not third-party lookalikes or grey-market stock, and shares serial numbers on request.
What is the FTLX6882MNC price in India and how do I order?
The Finisar FTLX6882MNC price in India depends on quantity, delivery city and current stock. Next Gen Networks supplies it with a GST invoice (input tax credit ready) and pan-India dispatch from New Delhi. Send the part number, quantity and delivery city on WhatsApp +91-7827955775 or email Sales@nextgennetworks.in for a GST quote.
What power does the FTLX6882MNC need?
It runs from 3.3 V with power dissipation of SFF-8419 Power Class 4 (>2 W).
Related Finisar parts
FTLX6882MCCTunable T-SFP+ 11.3G multirate, limiting APD, 80kmFTLX6882MTCTunable T-SFP+ 10.3G multirate, 80kmFTLX6672MCCTunable T-SFP+ 10G multirate, PIN, 40kmFTLX6871MCCTunable T-SFP+ 10G-ZR/OC-192, linear APD, 80kmFTLX6873MCCTunable T-SFP+ 10G-ZR multirate, 80kmFTLX6875MCCTunable T-SFP+ high output power 10G-ZR, 80kmGovernment, PSU and enterprise orders welcome. GST invoice and pan-India delivery.
Talk to Sales